Great run! I would really like to see you do a review and run on the Serpent Cobra MT-E and the Serpent Cobra 811T. Keep up the great work! Thank you for all your videos and entertainment.
Looks like yours has been the exception so far Vas. Most folks haven't had good results with this truck. Maybe ZD Racing has made some improvements? For what it's worth, I thought the suspension soaked up the big air landings better than most. It didn't seem to bottom out or bounce when hitting the ground. I'm surprised to say the least! Nice first run 👊🏻👊🏻
Hpi tires are a direct fit since they have shallow hex dish. I have a short vid on 2 s with my son driving it. Also if you can’t get parts for it look into team associated rpm parts work. I only paid 200$ Canadian total for mine so I’m happy with it for that price. The Center diff leaks but I used a gasket kit to fix that. The front and rear diffs are off a bit so under heavy load will cause wear. I’m going to just run it till stuff breaks and fix it on my spare time. Great looking truck, suspension is really good, overkill for what the rest of the truck can handle. Thanks for the video. I’d recommend this to people that are willing to work with the truck. You can get the 120 amp rtr for less that 350$ Canadian. Can’t beat that price
I've seen guys been landing not that hard and bending the chassis like butter on these. I still kinda like this truck though in the us you can get this for 179.99 and it's the v2 with all aluminum upgrades just super bendable chassis. Good video man 👍
That’s was a very suprising run, seemed to hold up pretty well man 👍🏻 could definitely do with a bit more speed but for what it is I thought it done alright. Great review as always 🤟🏻
Great Video again. I blow the front and rear diff on 3S [wrote 4S before, but this was a mistake] and I couldn't fix it. Also shimming was not a solution. What did I wrong?
I bought this car for my son a couple of weeks ago. It arrived broken. The front right upper suspension arm was already broken. After ten days of communicating with BG after sales they refunded me 102 euros so I only paid 138 euros for this car. Anyway the money saved has already gone to buying spare parts. The suspension brakes easily. If you find metal parts for this car, make sure to buy it. Their existence means that the plastic equivalents are not up to standard. So it's best to replace them asap OR it's better to buy the pirates 3 with the metal parts already included. In my speed run with the pirates 2 I achieved topspeed = 42 km/h. The version of the pirates 2 that I have and that's being sold on BG does NOT work with 4s lipo anymore (apparently the older versions from 2 years ago did). Send me a message if you want to know more of my first hand experience with this car.
Well after seing the unboxing I'm quite surprised to see it perform this well especially not breaking. Probably has a lot to do with being driven properly. Nice shakedown like always Mate!
Thank you for this, I'm glad it's turned out alright and not a complete waste of your time, Would of felt a bit guilty it that was the case. I had intentions of picking one up if the review was good but there a lack of spares available for it, It seems like the best idea might be to buy 2 rollers and use one for spares. You can get spur gears and diffs but not much else...
roadhog29389 if you are going to buy a roller just for parts might as well get Armma, best bang for your bucks,don’t waste your time with this truck, I had one and its pain in the buttom! I ended up selling for $50 only
@@209rc7 When I saw the parts situation, I went elsewhere, The buying a parts car thing is silly but seems like the only way to go if you need something you can't get for it
Nice one. Yeah these China cars are decent value for beginners getting into the hobby. One day Vas could you get two of them to do a head on collision at full speed and see what the outcome is! Haha that'd be something to see in slow mo.
Great video mate I always look forward to seeing your new videos and reviews I was thinking about buying this truck the rtr version but I'm still unsure about it I've heard a lot of bad stuff about them but it looks like you did a good job with yours
My bro has the RTR version of this and it’s brilliant what’s off putting is the lack of spares for it. We just have to 3D print them off now, which is a shame because it’s an awesome truck.
Sorry about that nasty comment from a couple weeks ago . I did not mean to sound so rude. I do love your videos and enjoy seeing a new video to watch. Thanks. Btw I’m a arrma fanboy any arrma videos will be appreciated
@@AussieRCPlayground Thank you Vas! I love your videos man and as I said before watching your channel is what inspired me start my own. Your raw driving and honest reviews are truly second to none. I've been away for a while but it is soooo good to be back Rcing. I'm binging on your videos I missed on my time off lol
I wouldn't. The thing is, yeah, it did ok, but I didn't really go hard on it because I was afraid that it would just break. I am going to gear it up a bit and come back for round 2, so we'll see how it goes then. If it can go toe to toe with any of my other MTs, then we have a great bargain, but if it falls apart, then we know to stay away from it. However, it did surprise me on this run, so let's hope it can keep it up.
Have you compared this roller to your OFNA/HoBao rollers? The guys on the ZDRacing facebook group say they are very similar and are upgrading their steering cups/hubs to the OFNA/HoBao units.
From other comments on your other videos, I hear the OFNA also shares parts with the Duratrax 835e (Also same as FS Racing e9.5...) Can you consider doing a comparison between them for similar parts or possible upgrades from one model to the next???
@@AussieRCPlayground May wanna compare with the Duratrax 835e (FSRacing e9.5) as well if you still got that one. I've heard the same about the steering cups/hubs (similar to OFNA/HoBao) and I believe it was you that pointed out that there are machined hubs available for that model.
Stuff like this has better part support overseas wich sucks cause theres a few id like to try but waiting weeks for parts sucks like I got the Dhk maximus wich is badass but I stripped a knuckle and waited 4 weeks for it to come lol
Mike's Rc Reviews I added all the parts available for this truck on banggood and it added up to $113.25 total parts including 2 differential rebuild kits (only $5.23 each), 2 Pinot gears ($5.99). Express shipping to Maryland in the US is $16. So I will just keep all these parts in stock. I got the 9116 V3 on Banggood with motor, etc, radio for $227. Add the parts and I am still at only $350 total shipped to me and parts to almost rebuild once.
Great review !! Love you man Guys don’t buy it! I just made a hybrid Outcast from my v3 pirate due to lack of parts. The roller is available for the outs V4 on eBay for few bucks more
nao ha peças zd racing ? sendo que partyilha com o buggy, sct e ate outras marcas identicas ,.. no creio q isso seja problema , comprando online se arranja montes de peças ,..
@@johnnycash7803 its good made strong made too last its just not easy to rebuild but it will definitely outlast your slash lol its like a heavyduty velion
@@johnnycash7803 i own few slashes too i have a castle 1415 i never used in it except with 3s needs at least 4s but arrma motor be perfect may need good spur gear tho just like the 2 400
@@rcplayer7581 thanks for the reply I'm totally bummed that I snapped the motor shaft on my castle 2400kv. I never change the spur gear on it ran fine as long as you mesh the gears just right. I just put the new arrma motor in yesterday an ran it on 3s quick had to head out. Seems to run beautiful. Gonna run a few packs threw it today an get back to ya.
@@rcplayer7581 btw my slash is bulletproof. It the only rc I have but been hopping it up for the last 5 years I got everything you can think on it it's now a truggy kinda I got 2.8 tires with the lcg chassis kinda best of both worlds in my backyard. I switch out the tires when I go to my buddy's track for racing. Even non Traxxas fans are absolutely stunned by my truck handling an durability. Like I say it the only one I have for right now so I got alot of tuning an love in her😋. I've made my decision I'm buying the arrma Typhon v4 6s for my next rc with my xmass bonus so the wife doesn't know what I spent on it lolololololol.
I WOULD LIKE TO KNOW IF THIS CART IS GOOD BECAUSE I THINK I TO BUY ONE ..VRX Racing Blast BX 1/8 Scale Electric Buggy Brushless RC Car RH816 4WD E-Buggy
Haha, not sure how you got that comparison, this is much smaller and has something that most the T brand cars don't use - aluminium. That said, yeah, you are right, it's not as cool. But it's also a quarter of the price, so....
That's a great truck and you have a great channel my friend! I've been subbed a long time. Hey bro... If you get a chance, come check out our channel. In our latest video we build a roof mount DIY remote,rotating searchlight. Pretty much the same thing they put on full size trucks! It would mean a lot. We're a lot smaller of a channel but we have alot of RCs and videos. Thank you
the 1/10 zd format is a loada shit vas dont bother there ..........that seems to be better built ............1/10 diffs went on 2s after first bash with no jumps lol poor crown gears shimming etc
Consistent reviews on a consistent track you still have the passion and you do great reviews thank you.
Thank you so much Robert, that means a lot. :)
The best thing about your running videos is the objective commentary. Keep it up!
👍😎👍
Really appreciate that Steve, thank you. :)
Not too shabby on 4s. I think you have made the best of this truck Vas! 👍👌
Great run! I would really like to see you do a review and run on the Serpent Cobra MT-E and the Serpent Cobra 811T. Keep up the great work! Thank you for all your videos and entertainment.
Looks like yours has been the exception so far Vas. Most folks haven't had good results with this truck. Maybe ZD Racing has made some improvements? For what it's worth, I thought the suspension soaked up the big air landings better than most. It didn't seem to bottom out or bounce when hitting the ground. I'm surprised to say the least! Nice first run 👊🏻👊🏻
You drive that truck like a pro!
Hpi tires are a direct fit since they have shallow hex dish. I have a short vid on 2 s with my son driving it. Also if you can’t get parts for it look into team associated rpm parts work. I only paid 200$ Canadian total for mine so I’m happy with it for that price. The Center diff leaks but I used a gasket kit to fix that. The front and rear diffs are off a bit so under heavy load will cause wear. I’m going to just run it till stuff breaks and fix it on my spare time. Great looking truck, suspension is really good, overkill for what the rest of the truck can handle. Thanks for the video. I’d recommend this to people that are willing to work with the truck. You can get the 120 amp rtr for less that 350$ Canadian. Can’t beat that price
Always good to wake up to a new playground video
Nice run. The car runs smoothly
What an epic car, does everything a car costing double does great review, im buying one now!
I've seen guys been landing not that hard and bending the chassis like butter on these. I still kinda like this truck though in the us you can get this for 179.99 and it's the v2 with all aluminum upgrades just super bendable chassis. Good video man 👍
That’s was a very suprising run, seemed to hold up pretty well man 👍🏻 could definitely do with a bit more speed but for what it is I thought it done alright. Great review as always 🤟🏻
Great Video From The Dirty old Bill Siff thumbs up
A lot of it is in the landing. Great driving
She flies pretty nicely👍 great driving is probably why it did not break😁👍👍 great stuff vas👍
Great Video again. I blow the front and rear diff on 3S [wrote 4S before, but this was a mistake] and I couldn't fix it. Also shimming was not a solution. What did I wrong?
You ran on 4s and forgot u owned a kraton
@@rcplayer7581 sorry, I wrote nonsense. On 3S not doing crazy stuff. What did I wrong?
@@Basherqueen haha np , idk much about this rig , i thought it was a good deal at 179 till i read your comment, for me i stick w losi and arrma ,
Awesome video review my friend looks like an solid rig for the price very nice happy bashing bud👍🤙😎🤪😝🙈🙉🙊👊✌
I bought this car for my son a couple of weeks ago. It arrived broken. The front right upper suspension arm was already broken. After ten days of communicating with BG after sales they refunded me 102 euros so I only paid 138 euros for this car. Anyway the money saved has already gone to buying spare parts. The suspension brakes easily. If you find metal parts for this car, make sure to buy it. Their existence means that the plastic equivalents are not up to standard. So it's best to replace them asap OR it's better to buy the pirates 3 with the metal parts already included.
In my speed run with the pirates 2 I achieved topspeed = 42 km/h. The version of the pirates 2 that I have and that's being sold on BG does NOT work with 4s lipo anymore (apparently the older versions from 2 years ago did). Send me a message if you want to know more of my first hand experience with this car.
Altona it is then! Your youtube layout and concept is sooo solid (y). Great content as always Vas!
Well after seing the unboxing I'm quite surprised to see it perform this well especially not breaking. Probably has a lot to do with being driven properly. Nice shakedown like always Mate!
It didnt look to bad, great testing Vas
Cheers mate. Hoping to get out there again with taller gearing and seeing what else it can handle. ;)
Thank you for this, I'm glad it's turned out alright and not a complete waste of your time, Would of felt a bit guilty it that was the case. I had intentions of picking one up if the review was good but there a lack of spares available for it, It seems like the best idea might be to buy 2 rollers and use one for spares. You can get spur gears and diffs but not much else...
roadhog29389 if you are going to buy a roller just for parts might as well get Armma, best bang for your bucks,don’t waste your time with this truck, I had one and its pain in the buttom! I ended up selling for $50 only
@@209rc7 When I saw the parts situation, I went elsewhere, The buying a parts car thing is silly but seems like the only way to go if you need something you can't get for it
roadhog29389 yup thats right!
Look on Ali express they have a lot of parts
Nice one. Yeah these China cars are decent value for beginners getting into the hobby. One day Vas could you get two of them to do a head on collision at full speed and see what the outcome is! Haha that'd be something to see in slow mo.
Great video mate I always look forward to seeing your new videos and reviews I was thinking about buying this truck the rtr version but I'm still unsure about it I've heard a lot of bad stuff about them but it looks like you did a good job with yours
ابتا. نبنن دهنقهتز
زذكتي لسنا ريتا 😔🤲🇮🇶🇮🇶🌺❤️❤️😭💔🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹
My bro has the RTR version of this and it’s brilliant what’s off putting is the lack of spares for it. We just have to 3D print them off now, which is a shame because it’s an awesome truck.
Just bought one... nice video
Wow that's a little rocket on 4s..
The "off brand" rc's have come along way in the last few years.
yes , is true !! 150 a 250 euros ,.. good cars rc
Sorry about that nasty comment from a couple weeks ago . I did not mean to sound so rude. I do love your videos and enjoy seeing a new video to watch. Thanks. Btw I’m a arrma fanboy any arrma videos will be appreciated
3s was a little muhhh but 4s looked fun. I think the electronics you put in that are pretty perfect for it. Great video as always Vas.
Thanks man. Thanks for stopping by bud, always happy to see a comment from you. 😊👍
@@AussieRCPlayground Thank you Vas! I love your videos man and as I said before watching your channel is what inspired me start my own. Your raw driving and honest reviews are truly second to none. I've been away for a while but it is soooo good to be back Rcing. I'm binging on your videos I missed on my time off lol
You are the best !! Well done
Looks like it does great!
How would you compare it to the Arrma Big Rock?
I wouldn't. The thing is, yeah, it did ok, but I didn't really go hard on it because I was afraid that it would just break. I am going to gear it up a bit and come back for round 2, so we'll see how it goes then. If it can go toe to toe with any of my other MTs, then we have a great bargain, but if it falls apart, then we know to stay away from it. However, it did surprise me on this run, so let's hope it can keep it up.
@@AussieRCPlayground Awesome! Looking forward to it!
I have these tires on my Talion on 6s and they hold up fine they havemt broke or even ripped
I plan to put a arrma blx 185 with the 2050 arrma ! I hope that gone hold!🤔🤔🤔
I'm building an 8s version of this truck right now.
ua-cam.com/video/tYVRvUbxPsE/v-deo.html
Nice brother,,,is moving good bro
Great video Vas. Have you tried out any of the Force RC vehicles? Would love to see your opinion of the Epidemic.
What batteries did you use in this video and where did you get them I just ordered this truck but without batteries and charger
Super video bro, nice truck!
Have you compared this roller to your OFNA/HoBao rollers? The guys on the ZDRacing facebook group say they are very similar and are upgrading their steering cups/hubs to the OFNA/HoBao units.
From other comments on your other videos, I hear the OFNA also shares parts with the Duratrax 835e (Also same as FS Racing e9.5...) Can you consider doing a comparison between them for similar parts or possible upgrades from one model to the next???
I'll look into it... 😊👍
@@AussieRCPlayground May wanna compare with the Duratrax 835e (FSRacing e9.5) as well if you still got that one. I've heard the same about the steering cups/hubs (similar to OFNA/HoBao) and I believe it was you that pointed out that there are machined hubs available for that model.
Not bad for a cheap truck nice diving vas a good surprise
Thanks Adam. :)
what web site can i order parts from? i have the 1/8 touring car and can't find parts... i need the steering blocks.
This was awesome!
I've been wanting to get one of these. How is the parts availability?
Stuff like this has better part support overseas wich sucks cause theres a few id like to try but waiting weeks for parts sucks like I got the Dhk maximus wich is badass but I stripped a knuckle and waited 4 weeks for it to come lol
@@codenamethecleaner7519 ya that does suck. I love the looks and design of the 9116 v3 but parts is what I'm hesitant on buying it. Good video btw.
Mike's Rc Reviews I added all the parts available for this truck on banggood and it added up to $113.25 total parts including 2 differential rebuild kits (only $5.23 each), 2 Pinot gears ($5.99). Express shipping to Maryland in the US is $16. So I will just keep all these parts in stock. I got the 9116 V3 on Banggood with motor, etc, radio for $227. Add the parts and I am still at only $350 total shipped to me and parts to almost rebuild once.
This truck is on amazon as a roller deal for something like 300 dollars. What did you pay for the roller And is 300 dollars a good deal for this.
Hi bro, I hope you answer me how much does this car run?
I hope answer thanks
This truck can run on 4s battery without any mod?
Do you have problems with the wheels breaking on these like the Pirates 3?
Great review !! Love you man
Guys don’t buy it! I just made a hybrid Outcast from my v3 pirate due to lack of parts. The roller is available for the outs V4 on eBay for few bucks more
nao ha peças zd racing ? sendo que partyilha com o buggy, sct e ate outras marcas identicas ,.. no creio q isso seja problema , comprando online se arranja montes de peças ,..
Awesome!
How good is that ZD?????
What esc motor combo?
You can say it... the motors from ya SLASH , ya built up. Lol wich was quite fast btw wish ya did more vids with it . RACE WARS?
Not too shabby
What’s your actual take on this one. Would you buy 1 today.
Nah, I wouldn't. It's ok, but needs work.
Aussie RC Playground
Here’s a better question. What do you think they are worth.
Is 250 dollars good deal for one. With electronics
Is that US or AUD? What's the Berserker worth from Hobbyking? Or the Sabertooth?
Aussie RC Playground
Canadian. 250 seems like a good deal to me.
I’m thinking about one. Not sure yet
😃💪hey vas, im sticking w losi , and. Arrmas i cooked blx 3200kv motor today it probably had 75 packs through it so i cant complain mm
How is that motor,? I order one for my slash 4x4 after I snapped a 2400 kv castle shaft an have no idea how either. I'll have it tommorow.
@@johnnycash7803 its good made strong made too last its just not easy to rebuild but it will definitely outlast your slash lol its like a heavyduty velion
@@johnnycash7803 i own few slashes too i have a castle 1415 i never used in it except with 3s needs at least 4s but arrma motor be perfect may need good spur gear tho just like the 2 400
@@rcplayer7581 thanks for the reply I'm totally bummed that I snapped the motor shaft on my castle 2400kv. I never change the spur gear on it ran fine as long as you mesh the gears just right. I just put the new arrma motor in yesterday an ran it on 3s quick had to head out. Seems to run beautiful. Gonna run a few packs threw it today an get back to ya.
@@rcplayer7581 btw my slash is bulletproof. It the only rc I have but been hopping it up for the last 5 years I got everything you can think on it it's now a truggy kinda I got 2.8 tires with the lcg chassis kinda best of both worlds in my backyard. I switch out the tires when I go to my buddy's track for racing. Even non Traxxas fans are absolutely stunned by my truck handling an durability. Like I say it the only one I have for right now so I got alot of tuning an love in her😋. I've made my decision I'm buying the arrma Typhon v4 6s for my next rc with my xmass bonus so the wife doesn't know what I spent on it lolololololol.
Told ya, you would be surprised ;)
Where can I buy this in Australia?? Cheers
You can't buy it in Australia. This is not available in stores, only online. Link is in the video description. 😉👍
Aussie RC Playground thanks mate. Do you recommend me getting the pirates 2 v3 or the other one? Cheers love your work. I’m
New to all this.
Nice 👏👏car
Nice run man i dont comment you because you never answer but anyway nice run
I try my best to reply to most comments on my videos, so I'm sorry if I've missed yours in the past. :)
I try my best to reply to most comments on my videos, so I'm sorry if I've missed yours in the past. :)
I try my best to reply to most comments on my videos, so I'm sorry if I've missed yours in the past. :)
I try my best to reply to most comments on my videos, so I'm sorry if I've missed yours in the past. :)
I try my best to reply to most comments on my videos, so I'm sorry if I've missed yours in the past. :)
You drive well
Thank you. 🙂
Geiles Video cooles Auto 💪😁👍
Salut Super je les acheté son électronique
I WOULD LIKE TO KNOW IF THIS CART IS GOOD BECAUSE I THINK I TO BUY ONE ..VRX Racing Blast BX 1/8 Scale Electric Buggy Brushless RC Car RH816 4WD E-Buggy
I think he reviewed that already. It should be the same as the bsr bz-888. Check his older videos its a few years old from hobbyking
@@fgarcia2277
IT IS NOT ANYTHING OF THESE CARTS AND IT IS MY FIRST THAT'S WHY I LOOK FOR HELP NOT TO VOTE MY MONEY
They have a very bad name in the UK for just breaking all the time. ✌
Good video but awefully biased mind from the very beginning.
its like a xmaxx but less cool
Haha, not sure how you got that comparison, this is much smaller and has something that most the T brand cars don't use - aluminium.
That said, yeah, you are right, it's not as cool. But it's also a quarter of the price, so....
Arrma REALLY spoils a guy for anything else! LOL. Sorry zd racing...but close.
That's a great truck and you have a great channel my friend! I've been subbed a long time. Hey bro... If you get a chance, come check out our channel. In our latest video we build a roof mount DIY remote,rotating searchlight. Pretty much the same thing they put on full size trucks! It would mean a lot. We're a lot smaller of a channel but we have alot of RCs and videos. Thank you
Not a Arrma? Wtf?
Oh don't worry, there's plenty more ARRMA on the way... 😁
the 1/10 zd format is a loada shit vas dont bother there ..........that seems to be better built ............1/10 diffs went on 2s after first bash with no jumps lol poor crown gears shimming etc