@@Just1MoreMod I Did Just Custom My X5 E70 & A Friend Just Make A Bmw x5 Comoetition 2021 Seats For Me To Fit On My E70 But I Want This Can You Make It For Me?
Any ideas on how this will effect longevity of the tiny bulb in the emblems? They weren’t designed to be on for long periods so any risk of burning out?
@@Just1MoreMod - trying to order the kit but no response from them yet. Any chance u can assist or have the wiring diagram? I see a wire from #7 to a wire in the rear console. Is that it? Any help would be greatly appreciated.
They can be on whenever you want, just can't be off whenever you want. Do they get hot? Mine also make a buzzing sound every time they come on which would be super annoying all the time
@@Just1MoreMod this was driving me crazy lol, ill give it another shot and let it sit, another thing i found out is that you don't have to connect it to the passenger side, both sides turn on with just the driver side ands if you disconnect the plug from behind the back vent (grey/purple) wire, for some reason it still gives power
Have you noticed that the emblems making a buzzing/humming noise when they're lit up? Mine are doing that and just wanted to make sure that it's normal
Almost inconceivable. I’d say on a scale from 1-10, a 1. Only with engine off, radio off, windows up and head back against the seat, the slightest can be heard.
Great question. I imagine it’s very close. I would assume if there’s still a place to tap in the rear of the center consuls, then it should be pretty much the same.👍🏼
Thanks for the video man I wanted to ask before I installed this kit Do the seat lights turn off when you turn off the car and leave the lights on auto or do you have to put the lights in the off position?
Yup, of course. Either way, if you leave the headlights in the auto position and turn off the car and lock it, the lights go out. Or if you manually move the headlight switch to off, they will go off. 👍🏼
@@Just1MoreModso I was able to pull the wire out on the passenger side with no issue, the driver one is giving me grief. I depress the clip end part of the wire and it starts to pull but then gets hung up on something. I tried to kinda push the end down where it’s getting caught and give it a little bit of muscle but no dice. Don’t wanna mess anything up and try to force it out. I sent them a message on Instagram. May have to send it back unfortunately 😪 Just my luck lol
This is how the seat emblem should have been from factory. Good video ❤
Agreed, and thanks! 🙏🏻
I don't own an F80 but your content is very interesting and informative, subbed.
🙏🏻 that means a lot. Appreciate ya! 👊🏻
@@Just1MoreMod I Did Just Custom My X5 E70 & A Friend Just Make A Bmw x5 Comoetition 2021 Seats For Me To Fit On My E70 But I Want This Can You Make It For Me?
Just bought mine thank you! This mod is going to be a game changer
Niiiice! You’re gonna love it! 👊🏻
Is there a way to have it ALWAYS ON?
Wow awesome mod!
Thanks! I love it 👊🏻
How to install those seat lights on my f83 M4? The installation is different to the f82 and f80.
Can anyone help please
Thanks
Saleh, please send us a message on IG with any issues you are having please!
Trying to do this on my F90
Any luck?
Does it work work for you? Is the wiring the same? Thank you!
Sorry for asking but im kind of lost at 14:00. What and where do you tap the wire ?
Great mod! Can you provide a link to the wiring kit you purchased?
Thanks! As soon as Mod Emporium gets a link, I’ll shoot it over. In the meantime, hit up Mod Emporium on IG or DM him on Bimmerpost 😎👍🏼
Any ideas on how this will effect longevity of the tiny bulb in the emblems? They weren’t designed to be on for long periods so any risk of burning out?
Just installed, but being LED’s and the redesigned black ones, thinking it’ll be alright👍🏼
@@Just1MoreMod Oh yeah you’re right, LEDs should be fine. Have you noticed a humming coming from the emblems while they’re on?
👍🏼 Someone on a forum said theirs did, but mine do not.
@@cokemachine62590 mine buzz but they are the silver older style
@@Just1MoreMod - trying to order the kit but no response from them yet. Any chance u can assist or have the wiring diagram? I see a wire from #7 to a wire in the rear console. Is that it? Any help would be greatly appreciated.
Can seem to find the wiring product in the links below
Any long term issues? Shortened life of the emblem or otherwise?
Nope. Been solid for 2+ years so far 👍🏼
They can be on whenever you want, just can't be off whenever you want. Do they get hot? Mine also make a buzzing sound every time they come on which would be super annoying all the time
Why can’t they be off whenever you want? It’s just wired to the ambient lighting. No buzzing here.
Does that also work for the M5 (F90) model year 2020?
This dosn't Work on M4 F83. Because the yellow Box don't exists. Can anybody Help me?
Will this work on the f83. 2016. I have put new seat badges in
Does your door handle light stay on? Mine does, unless i turn everything off
It goes off after a couple minutes
@@Just1MoreMod this was driving me crazy lol, ill give it another shot and let it sit, another thing i found out is that you don't have to connect it to the passenger side, both sides turn on with just the driver side ands if you disconnect the plug from behind the back vent (grey/purple) wire, for some reason it still gives power
Have you noticed that the emblems making a buzzing/humming noise when they're lit up? Mine are doing that and just wanted to make sure that it's normal
Almost inconceivable. I’d say on a scale from 1-10, a 1. Only with engine off, radio off, windows up and head back against the seat, the slightest can be heard.
Hey, Great Video! Is the Installation of the Kit, the Same way in a m2 Competition?
Great question. I imagine it’s very close. I would assume if there’s still a place to tap in the rear of the center consuls, then it should be pretty much the same.👍🏼
@@Just1MoreMod thanks for the answer! Do you think the place for the wire on the Seat is the Same?
@janniks3072 can’t say for sure, but ping Mod Emporium on IG. He’ll be able to confirm for sure 👍🏼
Hey!
Thank u for this Tutorial
Do you now if u take off the clipper if u need to recode the seats?
Hey, you’re welcome. Nope, shouldn’t need to as the kit is just tapping into the rear console power 👍🏼
@@Just1MoreMod okay thank you! I got another question, but can i write u like on ig?
Sure, same name: Just1MoreMod 😎
With the headlight switch on auto, do the emblems light up when its daytime? Or only when its getting dark and the low beams turn on?
Getting dark, and low beams are activated. 👍🏼
@@Just1MoreMod thanks for the fast reply man👍🏼
Any errors when you scan the car?
Haven’t manually scanned the car with BimmerLink since then, but no codes have popped up on my P3 gauge 🤷🏻♂️
How do yu turn headrest on/off?
It’s based on if parking or headlights are on/off 👍🏼
Thanks for the video man
I wanted to ask before I installed this kit
Do the seat lights turn off when you turn off the car and leave the lights on auto or do you have to put the lights in the off position?
Yup, of course. Either way, if you leave the headlights in the auto position and turn off the car and lock it, the lights go out. Or if you manually move the headlight switch to off, they will go off. 👍🏼
@@Just1MoreMod awesome dude thanks for the reply, gonna install them today! Keep up the great videos
No problem man. Take your time, and enjoy!
@@Just1MoreModso I was able to pull the wire out on the passenger side with no issue, the driver one is giving me grief. I depress the clip end part of the wire and it starts to pull but then gets hung up on something. I tried to kinda push the end down where it’s getting caught and give it a little bit of muscle but no dice. Don’t wanna mess anything up and try to force it out. I sent them a message on Instagram. May have to send it back unfortunately 😪
Just my luck lol
Disregard, got it all working, looks awesome!