I was raised by a mechanic who was highly skilled and also done most of my own work yet know little about electrical. I’m convinced that 99% of mechanics do not know advanced electrical such as finding a short. Someone skilled will find it quickly. In Houston I only know of one that’s at a Buick dealership and they say he’s a rockstar. If the young mechanics would learn all electrical they would be worth $150k a year easily because nobody knows how to do it. Great video bud!
In my experience when I was a young apprentice who had a background in electronics(my grandfather being an electrical engineer and my step dad being a 25+ year electrician) the part where mechanics not knowing anything about electrical is 100% true
Currently in school to become an automotive technician, and my goal is to get into a Porsche dealership. Anyway, turning wrench is easy. It’s easy to take an engine out of the car when you have the fundamentals. What I’m seeing nowadays is that technicians aren’t paid for their wrenching skills, they are paid for their knowledge and troubleshooting. I absolutely sucked at electrical at first, I stayed in class an extra hour because I couldn’t understand the circuits, and in my school we built them, wiring the headlights, taillights, hazard lights, turn signals, anything lights in a car we wired. I just couldn’t figure out the difference between parallel and series circuits and the different resistors we needed. After many more hours out of class, I decided I’d just mess with my car, follow the diagrams and just study until I got the hang of it. Finally, it clicked and it all made sense, and when it made sense, diagnosing became a breeze. Definitely a great skill to have.
I used to hate doing electrical work, until I watched a friend go through my rear lighting wiring...and figure out why my rear lights weren't functioning properly. It was meticulous...unwrapping tape...testing...removing useless stuff that others left behind...and learning to crimp wiring properly. When he did it, I realized I could do it also. Was just a matter of focussing on the problem at hand.
Agree completely. Just another learning curve....which is standard if you're gonna take on any automotive project...lol. I'm sure you're doing almost perpetual learning, even after many years at it.
It's a shame I had to waste my time watching the three videos above yours in the UA-cam search results. Great, simple and straight to the point. Helped me answer my question. Thank you sir 🙏
Gday from Aussie land Pete,,,, great vids as always,,, being a diesel fiitter myself, 12v and 24v electrical wiring and fault finding is part of our jobs, so for people like you and myself it comes naturally, I have Snap Ons equivelant to the power probe, wasn't cheap might i add haha,, makes your job lots easier in fault finding,,,,,,, but for those who thinks its a big birds nest, your vids help alot, having said that, please bring on more of the AC Cobra build mate
I generally use both a multimeter...or a test light. The thing that gets in the way sometimes is how short the leads are....especially if I'm working on the tranny wiring or something else in the middle or back of the truck. I end up clipping together some clip extensions. Wiring is definitely a challenge, especially when dealing with stuff that goes through larger bundles of wiring by the ecm or relay box under the hood. I'm definitely no expert at all on wiring, but with persistence I usually figure things out. I recently had a no crank no start on my truck, after it was off the road for a year and a half....after I got engine rebuilt and rebuilt the tranny myself. At first, it would crank with a screwdriver over the solenoid terminals...but then I got nothing. Ended up finding a break of the solenoid signal wire at the starter.....and also had a new neutral safety switch that was faulty. That neutral safety switch was a real block...because I couldn't believe it would be faulty...lol.
Good vid for the beginner. A power probe, or similar item is a god sent. I have the $300 Fluke meter...BUT. I always go to my $5 Harbor Freight tester. Just the simple pointy tip with the incandescent bulb. Never get the LED tester. You can judge the current by the brightness of the incandescent. Can’t do that with the LED.
Electrical is frustrating, i have a fair bit of experience but it doesn't hurt to get other wrench pullers opinion because ego doesn't get anything done
Awesome Video I've always be nervous about messing electrical part or wire etc.etc. I'm ordering the light tester from your link & gonna start doing all electrical in my Nova. Your explanation gave me the courage to give it a shot. Also keep this easy to follow Videos coming👍💯 Thanks Pete's Garage Yazmin Venice Beach CA ⛱ ⛱
Hi, you sound like you like wiring , so i have a 1992 Dodge van w/318 I have a crank but no start. I grounded out the fuel pump relay and now don't have spark or fuel. Change the relay's and then found a fusible link bad , peeled the insulation back and just twisted the wires together temporarily now I have power to the relay but won't prime fuel. I can jumper the wires without relay and fuel pump runs. Still had no spark at coil, found 30 amp fuse in the fuse block fried changed that and still no spark. Has new key cylinder lock and ignition module. What to do next trying to find if any other fusible links are fried but seem to be ok. Can you help me with a schematic and how to proceed?
Weird question here 12v rear lights are on and I stripped the outter insulation of the wire wire is still connected no issues would the strippers touching the wire cause the fuse to blow? Would that be a ground the stripper touching the wire ?
Great video, on another note I feel weird texting you out of the blue do you have any info on common issues with 351 Cleveland's. I've been inside and out of chevys but I just recently got a 351c for an 89 mustang gt project of my own. Not as familiar with ford's but this mustang has always been a dream of mine, 408 stroker, stock appearing fuel injection, and a tremic 6 speed the works.
Pete, thanks for the video. i ordered the tester just now. automotive wiring from mid 70's on back i've been pretty good at, except installing relays to added-on accessories. any chance you could do a tutorial on relays in the future ?
Good afternoon sir hope your day is going good! I have an INNOVA 3300 and i want to set it on DC10A and using the red and black lead probe the starter relay pin 30 & 87 to crank the vehicle while im diagnosing it under the hood cause i dont have a helper to crank the vehicle for me, is it possible to do that with the INNOVA 3300 sir?
I was very excited to learn. I approached my mastee mechanic. He said i dint get paid to pay u. Plus ur going to take my work. I have never asked to learn something n het reply with such an insecure answer. But here iam.
is there one of these to help urgent electrical professor electrician electric technician my case : ( when i connect the multimeter red to red the + / and black probs ) . gives reading as continuity important notes : 1 - NO BATTERY 2 - multimeter ON Diode mode " continuity" - is that normal - ?!?!?!
My horn quit working. I checked the fuse. It was OK. I looked at the wire connections to the horn unit and it was OK, not corroded. The horn doesn't work with the keyfob double lock nor from the steering wheel. What should be my next step, please. Thanks
Guys please help me out. As a student, I’m wondering would it be beneficial to study mechanical with electrical, or just electrical but more in depth working as auto electrician? Would auto electrician need to work on mechanical side at all? Would having know mechanical side help getting me the first auto electrician job?
hi i have a 2009 ford fiesta 1.6 tdci,i was driving it last week with no problems,then out of the blue a cog light came on which i have been told is the pcm light,the car died and wouldnt start for around 5 mins,eventually got it running and got it home,a friend plugged it in and a p0698 code came up,he said it was throttle pedal,so replaced that also put a new fuel filter after a day or 2 same thing happend,it wouldnt start so i put a forscan on it turned the pcm light off and it started,after 2 hours cut out again so i unplugged egr and it run fine for 2 days then the light came on again even with the egr unplugged,it has no problem starting but once that pcm light comes on the car will not start until i plug forscan into it and clear the p0698 code,is there anyone out there who can help it says sensor reference voltage c circuit low additional fault symptom circuit voltage below threshold......thanks in advance,jon
I was raised by a mechanic who was highly skilled and also done most of my own work yet know little about electrical. I’m convinced that 99% of mechanics do not know advanced electrical such as finding a short. Someone skilled will find it quickly. In Houston I only know of one that’s at a Buick dealership and they say he’s a rockstar. If the young mechanics would learn all electrical they would be worth $150k a year easily because nobody knows how to do it. Great video bud!
I agree 100%
How would I learn how to do that? Can you advise please
DOESNT matter on age I know mechanics in they’re 20s that have more knowledge on wiring vs the 20+year vets. 😮
In my experience when I was a young apprentice who had a background in electronics(my grandfather being an electrical engineer and my step dad being a 25+ year electrician) the part where mechanics not knowing anything about electrical is 100% true
@@just456bc idc about you experienced as a kid
Currently in school to become an automotive technician, and my goal is to get into a Porsche dealership. Anyway, turning wrench is easy. It’s easy to take an engine out of the car when you have the fundamentals. What I’m seeing nowadays is that technicians aren’t paid for their wrenching skills, they are paid for their knowledge and troubleshooting. I absolutely sucked at electrical at first, I stayed in class an extra hour because I couldn’t understand the circuits, and in my school we built them, wiring the headlights, taillights, hazard lights, turn signals, anything lights in a car we wired. I just couldn’t figure out the difference between parallel and series circuits and the different resistors we needed. After many more hours out of class, I decided I’d just mess with my car, follow the diagrams and just study until I got the hang of it. Finally, it clicked and it all made sense, and when it made sense, diagnosing became a breeze. Definitely a great skill to have.
That's awesome!! Good for you, hard work pays off
Where are you studying it
I used to hate doing electrical work, until I watched a friend go through my rear lighting wiring...and figure out why my rear lights weren't functioning properly. It was meticulous...unwrapping tape...testing...removing useless stuff that others left behind...and learning to crimp wiring properly. When he did it, I realized I could do it also. Was just a matter of focussing on the problem at hand.
You can do it if you try
Agree completely. Just another learning curve....which is standard if you're gonna take on any automotive project...lol. I'm sure you're doing almost perpetual learning, even after many years at it.
I lean something new every day
It's a shame I had to waste my time watching the three videos above yours in the UA-cam search results.
Great, simple and straight to the point. Helped me answer my question. Thank you sir 🙏
This video so straight forward and very impactful. I love it. Thank you Pete.
Thanks my friend
I purchased a Power Probe II , sort of Pete’s tester on steroids. One of the best tools I ever found.
Awesome!
Be careful!
Gday from Aussie land Pete,,,, great vids as always,,, being a diesel fiitter myself, 12v and 24v electrical wiring and fault finding is part of our jobs, so for people like you and myself it comes naturally, I have Snap Ons equivelant to the power probe, wasn't cheap might i add haha,, makes your job lots easier in fault finding,,,,,,, but for those who thinks its a big birds nest, your vids help alot, having said that, please bring on more of the AC Cobra build mate
Excellent points, I'm getting back to the Cobra this week, finally
I learned the old system. This is the first time I have heard of the floating system. Going forward I think things will be less confusing. Thanks!
Thanks my friend
I generally use both a multimeter...or a test light. The thing that gets in the way sometimes is how short the leads are....especially if I'm working on the tranny wiring or something else in the middle or back of the truck. I end up clipping together some clip extensions. Wiring is definitely a challenge, especially when dealing with stuff that goes through larger bundles of wiring by the ecm or relay box under the hood. I'm definitely no expert at all on wiring, but with persistence I usually figure things out. I recently had a no crank no start on my truck, after it was off the road for a year and a half....after I got engine rebuilt and rebuilt the tranny myself. At first, it would crank with a screwdriver over the solenoid terminals...but then I got nothing. Ended up finding a break of the solenoid signal wire at the starter.....and also had a new neutral safety switch that was faulty. That neutral safety switch was a real block...because I couldn't believe it would be faulty...lol.
Thanks Joe
Dude just for that acdc band meme i gave you a thumbs up …. Nice one
Rock on!
This is a very helpful video I have ever come across
Thank you!
Good vid for the beginner. A power probe, or similar item is a god sent. I have the $300 Fluke meter...BUT. I always go to my $5 Harbor Freight tester. Just the simple pointy tip with the incandescent bulb. Never get the LED tester. You can judge the current by the brightness of the incandescent. Can’t do that with the LED.
Interesting, thanks for the comment
Power probe 3 tells you the voltage on a display and lets you supply current too.
Good tutorial, Excellent communication skills. Nice tool review
Thank you very much!
Electrical is frustrating, i have a fair bit of experience but it doesn't hurt to get other wrench pullers opinion because ego doesn't get anything done
I have my ASE A6 ELECTRICAL and A8 Engine performance im studying for my A1 engine repair your videos help quite a bit
Awesome!
Great Vid Pete, I needed the refresher.
Glad you enjoyed it
Awesome Video I've always be nervous about messing electrical part or wire etc.etc. I'm ordering the light tester from your link & gonna start doing all electrical in my Nova. Your explanation gave me the courage to give it a shot. Also keep this easy to follow Videos coming👍💯
Thanks Pete's Garage
Yazmin
Venice Beach CA ⛱ ⛱
Thanks my friend, you can do it
Thank you for this introductory video. Very helpful for me.
You are welcome!
Great video, Pete! Very informative!
Thank you kindly!
Pete, this was amazing 👍
Thank you kindly!
Very clear information for DIY guys. Thanks a lot
Glad it was helpful!
This really helped! Thank you!
You're welcome!
excellent teacher👍
Thank you! 😃
Also, please make another video about finding shorts in a circuit. That would be greatly appreciated!
Will do!
How
Thanks For your Time, Very Useful, Informative Video.
Glad it was helpful!
Hi, you sound like you like wiring , so i have a 1992 Dodge van w/318 I have a crank but no start. I grounded out the fuel pump relay and now don't have spark or fuel. Change the relay's and then found a fusible link bad , peeled the insulation back and just twisted the wires together temporarily now I have power to the relay but won't prime fuel. I can jumper the wires without relay and fuel pump runs. Still had no spark at coil, found 30 amp fuse in the fuse block fried changed that and still no spark. Has new key cylinder lock and ignition module. What to do next trying to find if any other fusible links are fried but seem to be ok. Can you help me with a schematic and how to proceed?
There is either other blown fuses and relays, or a bad ground somewhere.
Weird question here 12v rear lights are on and I stripped the outter insulation of the wire wire is still connected no issues would the strippers touching the wire cause the fuse to blow? Would that be a ground the stripper touching the wire ?
Sounds like it
@@PetesGarage how come it would blow the fuse if I am not applying any electrical to it Just touching the wire with metal tool ?
I don't have all of the details, but if you touch a bare hot wire to any bare metal on the frame, even with a tool, it will blow the fuse
شكراً لّككك ؛
Thank Pete
Very Excellent
. instruction bud
Thanks my friend
Thank you. Very educational & useful.
Glad it was helpful!
What is the name of the Electrical tool, for testing shorts etc. I couldn’t open the link in the description or the Amazon page no longer exists.
It's a continuity check tool. I'll fix the link
When you tested the components, was it still hooked up to the battery?
Yes
❤
👍
Wow your video is easy to understand thanks
Glad it was helpful!
Wonderfully done
Many thanks!
Thank you very much for your videos
But I can’t see the link of your tools .
Under the video you have to expand the MORE tab
Great presentation!
Thank you kindly!
Thank you Sir for sharing your knowledge
Welcome!
Great video, on another note I feel weird texting you out of the blue do you have any info on common issues with 351 Cleveland's. I've been inside and out of chevys but I just recently got a 351c for an 89 mustang gt project of my own. Not as familiar with ford's but this mustang has always been a dream of mine, 408 stroker, stock appearing fuel injection, and a tremic 6 speed the works.
It's no problem to text me. There are a couple things you can do for a Cleveland.
Thanks Pete!!!
You're welcome!
I have a 97 mustang, when it's cold outside and I start it up the wipers come for a cycle. any idea what could fix that? everything else is great.
Maybe a new wiper switch
Pete, thanks for the video. i ordered the tester just now. automotive wiring from mid 70's on back i've been pretty good at, except installing relays to added-on accessories. any chance you could do a tutorial on relays in the future ?
Absolutely, thanks for the idea Norm
Where can I find the tool that test different electric systems like a fuse light headlight or horn switch
Any auto parts store
Good afternoon sir hope your day is going good! I have an INNOVA 3300 and i want to set it on DC10A and using the red and black lead probe the starter relay pin 30 & 87 to crank the vehicle while im diagnosing it under the hood cause i dont have a helper to crank the vehicle for me, is it possible to do that with the INNOVA 3300 sir?
I do not know
Thanks Pete, much appreciated!
Very welcome
Super helpful vid...thank you for it!
Glad it was helpful!
I have a question, what is the best way to learn mechanics hands-on or classroom?
I learned by doing
Acdc joke was hilarious 😂
It's a long way to the top....
I was very excited to learn. I approached my mastee mechanic. He said i dint get paid to pay u. Plus ur going to take my work. I have never asked to learn something n het reply with such an insecure answer. But here iam.
is there one of these to help urgent
electrical professor
electrician
electric technician
my case :
( when i connect the multimeter red to red the + / and black probs ) . gives reading as continuity
important notes :
1 - NO BATTERY
2 - multimeter ON Diode mode " continuity"
- is that normal - ?!?!?!
My horn quit working. I checked the fuse. It was OK. I looked at the wire connections to the horn unit and it was OK, not corroded. The horn doesn't work with the keyfob double lock nor from the steering wheel.
What should be my next step, please. Thanks
Wire the horn to the battery to make sure it works
@@PetesGarage Thanks Pete. That makes sense.
Can you have the same thing for obd 1?
Great video thanks for the upload
Glad you enjoyed it
How do I get the testing tool
The intro sounded like it was going to be followed by: “rev your engine!”
Absolutely not
Good pm am sir may I know what is the color code of any car model regarding the unlock door opening when key are inside the car I'm in philippines
I do not know
I need help with schematics, I cannot seem to get it.
Guys please help me out. As a student, I’m wondering would it be beneficial to study mechanical with electrical, or just electrical but more in depth working as auto electrician? Would auto electrician need to work on mechanical side at all? Would having know mechanical side help getting me the first auto electrician job?
I would do mechanical and learn basic electrical. Electrical can be very specialized but is not as common, in my opinion
@@PetesGarage Thank you for the advice!
Just FYI, the Amz link to the tools is not working any more.
Thank you
What is the name of the tools plz
12V circuit tester
Why does the cheap test light I have only have one lead wire
it's not cheap, it's only testing power to ground
Good very good.
Thank you! Cheers!
Great vid
I'm ordering one! Mine are decrepit .
Thanks my friend
Can't go wrong for $23
@@PetesGarage Plus it is big and hard to misplace!
What is a good source for unlimited wiring diagrams online? Thanks
There are a few places, but it really depends on the vehicle
@@PetesGarage ok thanks
Agreed very good
Hi I'm in kenya wish to have one that I connect with my phone
hi i have a 2009 ford fiesta 1.6 tdci,i was driving it last week with no problems,then out of the blue a cog light came on which i have been told is the pcm light,the car died and wouldnt start for around 5 mins,eventually got it running and got it home,a friend plugged it in and a p0698 code came up,he said it was throttle pedal,so replaced that also put a new fuel filter after a day or 2 same thing happend,it wouldnt start so i put a forscan on it turned the pcm light off and it started,after 2 hours cut out again so i unplugged egr and it run fine for 2 days then the light came on again even with the egr unplugged,it has no problem starting but once that pcm light comes on the car will not start until i plug forscan into it and clear the p0698 code,is there anyone out there who can help it says sensor reference voltage c circuit low additional fault symptom circuit voltage below threshold......thanks in advance,jon
That's a tough one, I'd have to see it
@@PetesGarage do you live in cardiff?,lol
Please what the name of the electrical test
Continuity tester
Where is the link for the tester?
Right in the video description
I didn't expect that acdc clip haha
Gotta have a little fun
GREAT...NEED THIS TOOL NOW....UGH.
It's only $23
Please is helpful can I get the tester
You can buy them at any store or online
Thanks a lot sir
Most welcome
Anyone use that obd scanner or another like it and have anything to say about it?
They all work well
Would have been helpful to have some deeper explanation, examples and applied testing of floating grounds
Great suggestion!
how can i contact you sir
petesgarageinfo@gmail.com
How much is it sir
It’s not possible to say what needs to be replaced by looking at the code alone.
What about when the component had many pins 📌 🤔 👀 😳
I don't know
I don’t recommend fixd they lie you never pay $19.99 you pay more.
You do not have to pay monthly. Mine still works fine without it.
Do not leave that Fixed plugged in your car all day use it and remove it,or it will drain your car battery dead.
I never had that problem, but thanks for the comment
Find a short in my car?
I did find a pair of my pants...does that count?
Depends whose they are
GoD dam everyone is thirsty to be an infomercial!
I only hate the diagrams. Otherwise not worried.
Gotta have the diagrams
Lovely presentation please share link or your whatsApp line
Thanks my friend
Or, just learn how to properly use a multimeter. It's really not that difficult, and a good one is much more capable than this tool.
That is true, but some people have zero understanding and just need a simple tool to check for continuity
Bro the first minute abraticing came on man at least start with something else
I don't get to choose that
He assumes too much ... plugging in an OBD device to send things to a phone is NOT what everyone wants or knows how to do.
You can try
nope; some guys view the video and have no interest in a smart phone at all... that's me.