15 Technical terms for Reinforcement Site Supervisor must know
Вставка
- Опубліковано 4 жов 2024
- In this Video Lecture I will discuss engineers on site 15 Technical terms for Reinforcement Site Supervisor must know
Reading article :
civilstudents....
Visit to :
www.civilstudents.com
What is Grade Of Concrete
• Grade of Concrete
In This channel You can Learn about Civil Engineering Update Videos which are using generally in civil Engineering. So please subscribe our channel for daily Update Civil Engineering.
If you have any questions. Feel free to contact me.
My Facebook ID / samiullahsta. .
Website:www.civilglobal.com
Facebook page: / civilenginee. .
_________________________________________________________________
Quantity of Cement , sand and Aggregate in Concrete.
New Video Lecture Billing of Quantity
www.youtube.co....
_________________________________________________________________
You Can Watch in this channel:
DAE Civil
BS Civil Engineering
BE Civil Engineering
B-Tech Civil (Technology)
Quantity Surveying
Thanks for watching and supporting Us.
-----------------------------------------------------------------------------------------------------------
To Subscribe Our channel Click on Red Button and Also Press the
Bell Icon
-----------------------------------------------------------------------------------------------------------
thank you
1st
Very useful. Please keep uploading more videos like this one
If u Need this Sheet you can visit to given link:
civilstudents.com/15-technical-terms-reinforcement-construction-supervisor-know/
U are a genious
Nice one !
All imp points cover with easy way ....!!!
Why lapping length is more in compression than tension ?
Valuable video. Thanks allot
Hai frd, you say hook length of striup is not less than 3inch..
But now we used according to 6d formula
For8mm strirrup
=6*(8mm)
=48mm or 1.88inch
How it posible
Very good
sir why we not overlapping the steel when its dia increase mote than 36mm.. please tell with explanation i am waiting for your reply
Assalamualaikum sir will u plzz show the formats of writing DAILY PROGRESS REPORT, WEEKLY PROGRESS REPORTS, MONTHLY PROGRESS REPORTS PLZZ
I think hook length is minimum 75mm or 10d.
Ex.
10× 6mm dia= 60mm
In this place we take, 75mm is a hook length. Plz Reply which one is correct.
Lapping for tension zone shall be 60d.
Thanks anna
well. but plz try to give a clear look of paper you have.thnx
Sir what's the unit of dia of steel in 6d formula?
Nice bro 🙂
Sami Ullah sahab, according to IS unit weight of steel for 8mm dia is 0.395 kg. Pls clear this confusion of mine...
bro its in kg/m and i am telling u in kg/ft
May be u got it
Raaj Sekhar for 8mm dia of bar it's 0.395 kg/m... In this video he is explaining 0.12 kg/ft...
sir aisa video banaw jo humy drawing sy shuttring ka naksha seka dy
You are just reading the text. For explaining please use real site photos makes the presentation more effective.
Hooks length should be 8d or 75 whichever is greater.
Manana sir g.... Der ha
Please tell length in mm or cm not in inch
Lap length should be greater in tension zone
Stirrup hook angle is 135 degrees, How? Isn't it 45 degrees??
Good👍🏻,but not enough explanation
20 terms for concrete
bhai pdf b do yaar........
Hook length is 9d.. Not 6d...
stirrup has 6D and if in slab or beam for longitudinal bar hook length is 9D
Minimum 75mm required
Sami ki english ki jayyyy
Yai video aapne english mean bnaaayi isliye mujhe samajh nhi aayi agr english mean hi banani hean to hum books sai bhi parh sakty hean sara
khan shb urdu ne blny ati apko
Sir plz hindi me explain kriye
It is not clear visible please
Trumps😀😀😁😁
explanation is not good as per requirement
Fake accent