I am great fan of you.. really loves your ideas more and more.. i try everything.. i don't miss any video's of you. i am always waiting for your next video. i inspire your chanel and start a small chanel but still like your video to see
TP4056 is for charging only will it discharge.....? If yes how the movement when we connect it is always changing only how to discharge....? Is there any Saperate model for discharge
can you show me how to build one without the charger part. I have a bunch of 18650 and i can charge them and check capacity. but lack discharging them to around 3v I like your idea here. on ebay they have 18650 pcb that i was going to use as the shut off from discharging but i need to know how to build the rest of it. let me know thanks.
Hello sir. Can i make that 3 wired digital voltmeter as an charges indicator and capacity level indicator?.what I'm planning to do is to put an display to my old powerbank module(all the smd led lights that indicates charging and capacity lvl to my PB module was broken) thanks in advance ❤
Thank you . While on discharge cycle, do you get to read the battery capacity . OPUS Charger/discharger , LITTO KALIA and SKY RC CHARGER/ discharger provides battery capacity at the end of discharge cycle. Please let me know. Thanks.
Could you use all the battery WHILE charging in parallel? Instead of having 1 load per battery, i would need to power a small GPU that require 5V and about 2.6Amp so im thinking of using 6 TP4056, 6 batteries and 1 DC converter to 5V (up to 3 amp). Does it sound stupid?
Can someone tell me more about this switch? I noticed that it is a 2 position On-On, not a 3 position On-Off-On, but what I cannot tell is if it is a SPDT or DPDT, or if it matters? Help, please. Thank you.
It keeps NiCad batteries lasting longer and re calibrates Lithium Ion batteries. You shouldn't do it, but every 30 or so recharges though for lithium Ion as it is actually not good for them.
What is the led and resistor for? I thought you setup the led display for showing battery capacity in amp hours but it isn't. Do you Just time how long it keeps the LED on before the voltage drops below a certain point?
LED is to show it's discharging, the small resistor it to current limit the LED so it does not burn out, the large resistor is to discharge the battery. The display shows the voltage of the battery. You don't time anything, you just stop when the voltage is the required value, 4.2v for charging or 3.6v for storage
@@Ziplock9000 Is the battery being discharged when charging or the resistor acts as a load when the battery is not charging so as to discharge the battery and prove the discharge function of the TP4056?
Hello dear wich phone you using for video recoding .
Your room is nice 😀and your creativity is brilliant 😄
you can increase readability of the 7 segment volt meter by putting some kapton tape or brown packaging tape
I'm in love with your drawers 😍😍😍😍
*Awesome setup* !! 😇
yes thank you
HEY, didn't I seen this before? Oh yeah, on MY CHANNEL!
I've seen the clip you are talking about. You are right.
That's right
Lol, he cant have his own ideas ... I feel pitty for click thefts
Heloo mr sorin i love you
It's a nice coincidence to see you here.😍😍😍❤❤❤😘😘😘
your office room is awesome
Coolest music bro! Thanks for the schematics! Excellent work.
Congratulations for 2 million subscriber in advance
Всё отлично! Я бы пожелал каждому, у кого руки растут из правильного места - такие наборы комплектующих и такую мастерскую...
Your chanal is my favourite youtube chanal
Awsm video better than before. Because you are showing your room
I am great fan of you.. really loves your ideas more and more.. i try everything.. i don't miss any video's of you. i am always waiting for your next video. i inspire your chanel and start a small chanel but still like your video to see
your workshop!!!..
i am in love 😍😍😍😍😍
Nice setup and the studio 👌👌
Awesome room and awesome invention 👍👍👍👍
good one but can we charge 18650cell 7s and 11parallel
bro u n ur setup both r osm
Sweet work area. Tidy. Well lit. Your soldering skills are perfect.
You and your setup and things you made amazing and cool
6:44 what is the name of that green mat?, i´m trying to buy one
I think that is self healing mat
Yes it is self healing mat im also having that
thank you guys, after years i finaly know the name of that thing
@@ElectroRetro में
@@DTeK y cual es el nombre? para saberlo nosotros también y poder comprarlo
TP4056 is for charging only will it discharge.....? If yes how the movement when we connect it is always changing only how to discharge....? Is there any Saperate model for discharge
Very big and cool workroom
can you show me how to build one without the charger part. I have a bunch of 18650 and i can charge them and check capacity. but lack discharging them to around 3v I like your idea here. on ebay they have 18650 pcb that i was going to use as the shut off from discharging but i need to know how to build the rest of it. let me know thanks.
Im not understanding the use of the 10W 10 Ohm Resistors What are them for ?
Do you need to Set the low voltage cut off every time ( USB disconnected )
Your storage box is cool
Please please sir answer this question can I use a pc psu to power 12v 60watt led panel ?
Всё отлично! Нравится и уважение! Я бы пожелал каждому, у кого руки растут из правильного места - такие наборы комплектующих и такую мастерскую...
Good luck my friend
nice ...please make automatic incubation
Shall i connect 2 battery in parallel and charge using single tp4056 module.. It is possible or not. Any problem occur in battery or not
how we can run an brushed motor by using esc... receiver... remote (transmitter) .
Hello sir. Can i make that 3 wired digital voltmeter as an charges indicator and capacity level indicator?.what I'm planning to do is to put an display to my old powerbank module(all the smd led lights that indicates charging and capacity lvl to my PB module was broken) thanks in advance ❤
Is it safe TP4056 module for battery🔋??
yes, it's tp4056 with discharge protection function.
Hi how to add single output or discharge .. 4 parallel battery
Thank you . While on discharge cycle, do you get to read the battery capacity . OPUS Charger/discharger , LITTO KALIA and SKY RC CHARGER/ discharger provides battery capacity at the end of discharge cycle. Please let me know. Thanks.
The displays only show voltage
Can I charge the high drain battery using the tp4056 charging bord? Pls reply
HEY CAN YOU SHOW US HOW TO MAKE A SMOKER FOR FOODS. THOSE HAND HELD ONES PLEASE!! Thanks soooo much!!! Your videos ROCK!
can we use TP 4056 for 32700 lifepo4 cells.?
1:36 Awesome workspace arrangements
soon ur gonna to cross 2 million subs
How much adaptor voltage input to component?
Could you use all the battery WHILE charging in parallel? Instead of having 1 load per battery, i would need to power a small GPU that require 5V and about 2.6Amp so im thinking of using 6 TP4056, 6 batteries and 1 DC converter to 5V (up to 3 amp). Does it sound stupid?
hey freind . i like your projects very much..can you please change the intro of your videos? you are using the same intro since years!!
Good hit 👍🏻👍🏻 🇮🇳 || Kuki 15|01|2022
please show your full lab store in where you working
can you show yours lab and how did you organize your lab please
why resistor 10w 10 ohms?
To discharge the battery!
Excellent project
Gajab but harana channel Tech with sharma ji bhi par more kro yarro
The chip in the part list is TP4056. The chip you are using is the TC4056
wow nice bro good idea👍👍👍👍👍👍
your workshop this incredible friend :D :D :D :D
Can someone tell me more about this switch? I noticed that it is a 2 position On-On, not a 3 position On-Off-On, but what I cannot tell is if it is a SPDT or DPDT, or if it matters? Help, please. Thank you.
nice! but redstone would do?
Hi I would like to know if I can put 3 18560 batteries in serie and charge each one with a tp405 in parallel with the batterie.
Thank you very much
How much money do you spend on electronics per month?
which song did u use in the beginning???
ah...what is need of discharge?
It keeps NiCad batteries lasting longer and re calibrates Lithium Ion batteries. You shouldn't do it, but every 30 or so recharges though for lithium Ion as it is actually not good for them.
@@stevenpuckitt212
I didn't know that. Thank you for your information.
1:37 nice "setup", yes, i know that you guys paused on that part .
D-Tek that green mat is called Crafting mat
Ohh I like the workshop
I wanna one like that
What is the led and resistor for?
I thought you setup the led display for showing battery capacity in amp hours but it isn't.
Do you Just time how long it keeps the LED on before the voltage drops below a certain point?
LED is to show it's discharging, the small resistor it to current limit the LED so it does not burn out, the large resistor is to discharge the battery. The display shows the voltage of the battery. You don't time anything, you just stop when the voltage is the required value, 4.2v for charging or 3.6v for storage
@@Ziplock9000 Is the battery being discharged when charging or the resistor acts as a load when the battery is not charging so as to discharge the battery and prove the discharge function of the TP4056?
@@danielemmanuel8850 The large resistor is only there when discharging. It's used as a load.
WHERE DO YOU BUY YOUR MATERIAL? :(:(:(
MIGUEL amazon
Are you changed your room bro
You are Great You solve my problems very well really Bro
I liked your room
Nice camera view bro🔥😂
Excellent work keep it up.
Are that lithium-polymer ore lithium-Ionen batteries???????
Which function fulfills the 10w load resistance at the TP4056 module output?
Discharging (it says in the title)
Wish I could have a workshop like yours 🙄🙄
In next video please show your workhouse
Good video but I personally would hide my coke spoons
Hallo sir, can charger discharge AA battery?
Creative Channel+
Nice now can you turn that idea into a 4S 16.8v balanced using the TP4056 @ 4 amp charge?
Hi bro do you sell your drone
What application is providing the plan
great project
Aap ne kis chij ki panhi ki hai
Very nice 😊👍👍
Plz ans me your used Wight sheet name ...plz
Which study have you done for this type of work
Can you make a 12 to 220v 500 watt inverter?
TENGO UNA DUDA, CON CUANTAS BATERIAS 18650 SE PUEDE HACER UNA BATERIA PARA ATORNILLADOR DE 18V Y COMO SE CONECTARIAN GRACIAS
please how to build a Charger / Discharge for Ni-MH AA Battery
Good Video !
It never entered my mind. Thank you
BEAUTIFUL WORKSHOP THAN THE PERVIOUS ONE.
good......super......👌👌👌
Very nice work
Good idea 👌
i like your room
hey. I love your videos.
Can i use 10W 12ohm resistor instead of 10W 10ohm Resistor?
No it will draw more current bro
Vary nice bro,, GOOD WORK BRO
can i put a 20 watt resistor
Please upload your next video about your self introduction like your house and your lab videos
Can you Show me more about your workplace?
Kitnae sare saman hain is kai pas yrr
Bhai tum apna setup tour dikhao