Creative Ideas From Used PC Power Supply
Вставка
- Опубліковано 28 лип 2022
- Making an Adjustable Power Supply and Led Tester Auto Volt from a Used PC Power Supply.
Parts :
1. ATX PC Power Supply
2. 10A Auto Buck Boost
3. Digital DC Multifunction Tester
4. Step Up Xl6009
5. Potentiometer 200K
6. DC Voltmeter
7. Switch
8. Socket Banana
9. Socket Lighter + 5V Charger
10. 10A Fuse + Holder
11. Red and Green Led + Holder
12. Resistor 220 Ohm
13. Resistor 2.2 KOhm
14. Knob
15. PVC Sheet
Visit the Creatividea Channel
See other videos here:
/ @creatividea
Don't forget to LIKE, SUBSCRIBE, and provide suggestions and comments
Thank you - Навчання та стиль
Sangat bermanfaat.. jadi tambah ilmu. Semangat berkreatif. 👍
Luar bisanya kawan ... hasilnya. Teruslah berkarya kawan
ide yang sangat bagus dan bermanfaat kawan..
Mantap sekali Kreasinya, bisa buat Alat Tester Voltage, Lampu LED dan Charger.
This is a beautiful build!!! Congratulations
mantap Hasilnya suhu 👍👌🙏
Really good jobWith a nice design👌👌👌👌👌👌👍👍👍👍👍👍
Very neat project! From an electrician - You really should make a better earth connection on the supply side, super important with switch-mode power supplies.
As an automotive diagnostician and electronics project hobbyist, I concur. Poor grounding can create a myriad of faults.
MANTAP,,,kalau sambung buat port usb a, dan type c,lagi padu ni
ambil dari jalur output 5V yang kabel warna merah, kalo mau fast charging tambahin modul fastcharging sesuai spek HP
Kreatifitas yang tinggi perlu orang yang profesional untuk seperti ini....lanjutkan kawanku....salam dari saya ngopi yuk roomku
makasih kawan
Ótimo trabalho,
Muito bom mesmo.
Com um design agradável.
Funções bem definidas e práticas.
Parabéns.
Tudo de bom para você e os seus.
E aguardando mais trabalhos, para nos inspirar e ajudar nesta "arte" que tanto gostamos.
👏👍
obrigada🙏🙏🙏
@@creatividea Romania?
참 좋습니다.
Tutorial yang sangat bermanfaat 👍
Terima kasih
Very creative stuff. Thanks for sharing
Very professional work, Thanks my friend ♥️♥️♥️♥️♥️
Thank's 🙏🙏🙏
Excellent ,all the best and keep it up..
I liked the video the most, I loved it congratulations I left my LIKE to strengthen the channel
There are many different ways to do things, but this way is very practical, and from easily available resources.👍
Impresionante trabajo, preciosa fuente, congrats!!!
Great built and perfect for a weekend project.
Que belleza es la gente como tu que recicla y de cosas que se tiran hacen un lujo.. ojalá exportes mucho, vendas muchos y te apoyen mucho más... Yo lo unico hasta donde llego a desarmar la fuente, después la vista no me da para más jaja.... Genial !! Disfrutando su sabiduria!!
Boa Noite com um começo de um bom dia. Fiquei até agora vendo o vídeo dessa fonte que você refez totalmente. Ficou muito legal e gostei bastante da sua ideia de colocar esses componentes eletrônicos e instrumentos de medição. Só faltou o mais importante de todas as coisas que você fez. Foi explicar todos os detalhes de cada modificação. Se você achar que sou digno de sua atenção e respeito por seu canal eu fico feliz em ter retorno de sua parte. Ontem dia 16/09/23 Eu estava tentado fazer uma fonte pra mim de uma fonte de computador e não vi que era 127 volts e entrei com 220v direto. Só vi foi os capacitores estourando.kkkkk me ajuda aí à fazer uma outra pra mim. Obrigado. Fico no aguardo.
Excellent project, thank you, it is worth every second OF WATCHING.
I loved the step-by-step assembling technique you used.
Nice, I got several old pc, I see a second live for the power supply, thank you! One question how did you make that nice lay out is it a sticker, how did you made it.
Keep up the good work!!
mantap bang...sangat kreatif
Kreatif dan rapi❤
Beautiful well done 👏 my friend 👍
Wonderful Sir excellent fitting all work is completely professional.
Excelente trabajo. Gracias por compartir.
nice work!
cheers for sharing!
also, great idea for a helping hand!! 😀👍
Amazing my well done 👏 beautiful job 👏 👍 very nice 👍
I enjoyed watching you work
Mantap 👍👍👍
Catatan saja bang resistor 10ohm Sbg dummy load nya jangan nempel ke PVCnya hanya menggunakan alas tape karena panasnya tinggi bahaya bisa mlonyot /meleleh boxnya
makasih
atau sebaiknya tidak usah pakai dummy load, tapi dgn syarat tombol powernya pakai saklar on off, jgn pakai push on button.
bagus, cocok untuk repair HP/Perangkat Elektronika
Felicitaciones... muy ingenioso. Eres admirable.... 👍
luar biasa... 👍👍👍
Nice, excellent build 😉👍👏👏👏
keren bang ide kreatifnya
Vidio ini sangat baik dan bisa menjadi motipasibagi yg pencinta electronic buat yg masih muda dan tua. Dan teruskan berkarya maju terus untuk berkarya yg berguna ini adalah ide kreatif baik sekali mohon ma,af sebelum nya saya mau tanya bila di dabling dua power supply apakah ambahan asesories nya masih sama terima kasih
That's a workbench power supply. What a nice build. I have few PSU lying around but most of them are not working anymore.. Those were replaced from the desktop I repaired. I really want to repair PSU to repurpose them..
Mantap tenan rek, pengen buat aku😅
diem diem' bae...metode secepat kilat wussshhh..untuk para suhu wusshhh
Increíble maestro. Ud. es todo un genio.
Saludos desde la ciudad de Iquique Chile.
Very good information and knowledge able video 🙂
Good job 👏 you are the best 🎉
😃Wow super skill 👏👏👏👏👏
kreatif banget bang 👍
Patut ditiru buat kebutuhan rumahan.. DIY project
beautiful work
Ficou sensacional o projeto,tenho aqui alguns transformadores de nobreak e fonte de pc que pretendo fazer alguma coisa boa tambem
Nice build and also the trick with the multi-turn.
Just one thing: the 10 Amp as specified for the auto_buck_boost is for the max current of ether (input or output) else the magic smoke will be released.!!
Excellent n super ideas
ola boa noite sensacional seu desempenho na tecnologia muito obrigado pela aula e dica
Bonjour, beau boulot!!!! MERCI!!!
Wow.. good tutorial pembuatan pengacas Handphone
PARABÉNS PELA SUA CAPACIDADE E CRIATIVIDADE ABRAÇOS. SABE. TUDO.👏👏👏👏👏👏👏👏
That ground strap connected to the plastic stand off and pvc case.... Work of art ! ! ! ! !
😷
wanna talk about the 12V rail transformed into car ligther plug and then back to 5V while there is a 5V rail available already on this ? Or about how dangerous those old shitty PSU are ? Or the bad ground soldering on the right converter ?
I also hope that fuse is 12V 10A and not 240V...
What kind of potentiameter did you use to convert to a multi turn pot?
Great video 😊
This is mono potentiometer
@@creativideaqqqqq bị hư hư hư hư
Quel talent 🙏🏻🌹👋.
Классная универсальная приспособа получилась !!! 👍👍👍
Nice. Thanks for sharing
Thanks for the video, your desoldering pump looks really efficient, what model is it?
I liked this transformation 👏👏👏
Ficou legal demais esse projeto!
Parabéns!
obrigada 🙏🙏🙏
Mas afinal o que ele criou mesmo? Um multímetro e um relógio foi?
Ini baru mantap.. 👍
Bisa dipraktekan di rumah nih
Parabéns, muito lindo este trabalho. Gostaria de saber onde conseguir este adesivo frontal da fonte.
Thanks for idea 😊
Very impressive! The only things I would add would be a power fuse on the 240V input, and a screen on the fan!
Thank you for the input suggestions, as far as I know the fuse is already in the ATX power supply
If you have good eyes and can see the fuse its there its on the board its somewhat easy to see for younger people like me
Good one...tons of information.
Thank you very much, good luck, important information
Gostei simples e eficiente. Todos eletrônicos que já vi montando um aparato parecido, teriam que usar uma fonte atx de melhor qualidade, pois a mesma fonte que não serve mais para o pc já foi usada de mais gaste um pouco mais e monte numa de melhor qualidade. Comentem 😎
This is actually one of the most useful builds I have come across, great job :) Keep being creative
pesan bisa
Serviço lindo 🥰😍
Well if you wanted to make something that looked like it came out of Russia - good job! Can't wait to see the carry case.
Hint: Take advantage of the existing fixed 3V, 5V and 12V by putting banana jacks for those as well. You don't always need variable voltages, but you will always need 3,5, or 12V For example you can power a microprocessor with 5 volts, and then use a variable voltage to test ADC inputs response.
@Sheila Walker Just out of curiosity: how would you use those? Are they somehow provided via the ATX-plug?
@Sheila Walker I was actually curious how he could use "...the voltage and current sense of the power supply..." by just using the cables going to the ATX-plug... Agreed that some things I would have done differently, like labelling a 12V car-outlet socket as 5V, because you intend to plug a USB-converter into it or GND & housing... Also you can get some nice standard voltage values by e.g. using -12V and +12v -> 24V. I like his idea of hooking up an adjustable DC-DC converter. All in all an old PC switching PSU does not really deliver "crude and un-monitored" electricity though - maybe it's a bit diluted at the output of the adjustable DC-DC converter, but for standard values like 3.3V, 5V, 12V and 24V I'd go for the clean PSU output. Cool idea with the LED test - lots to learn there ;)
@@itsmeadude460 😭э
By cutting the wires off of the connectors you'd have the 3, 5, and 12 volts out. Group them in parallel by color and feed them to the rest of the circuitry, You wouldn't even have to open the computer power supply - just use it as is.
@@markpeterson5479 use it as is... then it wouldn't fit into the new cage.
Parabéns ficou muito top mesmo seu projeto
Bravo o super idee !
Lavoro pulito,meticoloso, e molto attento...BRAVISSIMO! Non capisco solo cosa siano e a cosa servono i 2 moduli.. grazie
Nice Build.
Great job ..🙂👍
Ini mah suhuu😊
Очень интересно! Но всегда начинайте с принципиальной схемы, как минимум уважение к зрителям которые понимают схемы, так за несколько секунд понятно что собираете!!! И после этого уже посмотреть подробную сборку в вашем исполнении.
In this video, what tool did you use to remove solders so cleanly and quickly from the PCB board in order to remove the potentiometer from the voltage converter?
Boa noite parabens pelo seu trabalho
Interesting stuff, need to make one of those myself)👍
The work is too neat.
GOOD IDEA BRO, MAKE MORE SUPPLIES AND LAUNCH IN MARKET FOR COMMERCIAL USE AS WELL💯.
Muito legal. Parabéns. Pode me falar a respeito do material adesivo que usou no painel? Obrigado
I also wanted to built something like this but the costs involved made it more expensive than buying a 80v DC 10A ready made adjustable power supply with built in voltage protection. The only thing it did not have was the socket for cell charging but it did have ports for static voltages.
Olha ta de parabéns muito bem feita acho que nao sei nem se tem palavras pra elogiar que seria pouco ... ta de parabéns
Il faut vraiment être balaise en électronique pour fabriquer un truc pareil bravo et félicitation...
Excellent!... makes me wa nna upgrade my old creepy one ;)
Uno de los mejores Proyectos que haya visto en mi vida, hecho con una Fuente de Computadora, le Felicito al creador de este Proyecto...Saludos desde Paraguay....
Отличное видео, отличная работа!!!!! Почему этот мастер не показывает себя? С удовольствием бы с ним пообщался. Я тоже занимаюсь изготовлением электронных поделок. Жаль, что не говорю по английски. Автору видео респект!!!!!!!!!
Похоже, что автор пакистанец, поэтому он тоже вряд ли по-английски говорит
@@nurtoolsnurtools3562 Не важно кто он по национальности, он творческий человек, я таких людей уважаю. А вот общаться, к сожалению, умею только на русском языке.
Делал такую штуку. Только ампер-вольтметр запитывал от ЗУ телефона и пожадничал на светодиодный тестер. Жаль, что фото не могу разместить. Корпус БТХ остался родной.
Trmksh ini sangat berguna
Haii jefry, aku sering liat youtube mu.
@@triwibowo8500 trmksh pk
Terima kasih kembali
Wow.. its brilian..
Mantap bang 👍👍👍👍👍👍👍👍
Nice video, thanks :)
That's really complicated easy for you because you know what are you doing .