I finally found someone that talks like me! Lol. The tumbler is perfect! I was looking for ways to apply handles to my cups and came across this. Great idea!
LOVE THIS! I've been obsessed with the "Diamond Plate Steel" cups and they are a hit! Im gonna add this to my repertoire!! Thanks for sharing!-Kat 💟💟💟💟💟💟
Gorgeous ❤I’ve had these things for 2 months now and haven’t done it but you have inspired me 😊 I almost cried when it took some of the epoxy off. You’re so patient 😅 love the grease marks too. Awesome job 👏🏽 stay blessed love 🥰
Well that’s crazy how the epoxy peeled off!! Great job on this tumbler! You’re husband will love it 🥰!! I made a tumbler like this for my brother-in-law, for my base I did the diamond plating! Hope you’re having a great weekend
Very cool. I made one a few years ago and used JB Weld in a tube...what a mess that was. I did not know about the clay like you have. My hubby is a welder be trade and I even add a little silver paint where the black jb weld is. I have seen what welded lines look like. I think it looked great because he asked me did you weld this its a great job. I of course said yes.😂😂😂 But thank you for this video because now I will find the clay type you used and it will be easier. I do not sell or make videos I just have a very expensive hobby. You did a Beautiful job Sending big hugs from Sheryl in Indiana 💙🎨💙
@@heartofitall its is amazing with or without. I am tip toeing through your backlog of videos. Hope thats ok. You have an amazing backlog. I have a severe neck injury and can not work in my studio right now. I have been layer up for about 7 months. I keep a journal for tumbler ideas and always list the makers name so if I make anything inspired by you or any artist I try to give credit if I post any pics. Since I do not have a business I am a little shy about showing my creations. Thank you for sharing your time and talent. You are amazing...you Rock my Tumbler Art World 🌎 again Thank You..hugs Sheryl from Indiana 💙🎨💙
I just had that happen. I epoxied a cup and added a decal and didn’t like it. When I went to remove it it took all the epoxy off in chunks like yours. It’s still sitting there lol that’s soooo cool. I love it.
The reason your epoxy came up is because you sliced the cuts into the cup. That mixed with the thin layer of epoxy and it not being fully cured, it’s more vulnerable.
I’m so sorry I am just seeing this comment. Here is the font I used www.creativefabrica.com/product/mr-fix-it-tool-font-for-handy-men-and-women/ref/1834728/
I finally found someone that talks like me! Lol. The tumbler is perfect! I was looking for ways to apply handles to my cups and came across this. Great idea!
@@melisachilds8025 thank you!
Now that's a great gift for Fathers Day, Birthday, Retirement.
Absolutely it is!!
LOVE THIS! I've been obsessed with the "Diamond Plate Steel" cups and they are a hit! Im gonna add this to my repertoire!! Thanks for sharing!-Kat 💟💟💟💟💟💟
Thank you!!!
What a FANTASTIC idea!!! I’m totally making this for my hubby! TFS!❤
Thank you so much!!!!
That’s great!! Love it! You have such awesome ideas Shell!! Much Love 🩷😘
Thanks Jenni ❤️❤️
Gorgeous ❤I’ve had these things for 2 months now and haven’t done it but you have inspired me 😊 I almost cried when it took some of the epoxy off. You’re so patient 😅 love the grease marks too. Awesome job 👏🏽 stay blessed love 🥰
Thank you so much!! I definitely wanted to cry lol
Well that’s crazy how the epoxy peeled off!! Great job on this tumbler! You’re husband will love it 🥰!! I made a tumbler like this for my brother-in-law, for my base I did the diamond plating! Hope you’re having a great weekend
Thank you!! Diamond plating would be awesome on this!!
This is sooo cool!!! You could also mattify the cup, I think it would be great in matte 😍😍😍
Great idea!!
Awesome! This is one I'm copying next week or sure!!! Thanks so much for sharing your idea.
That’s awesome!!!!
❤❤ perfect fathers day gift!!
I love it
Thank you so much
I have had that same epoxy do that to me too. Love how it turned out.
Oh man that sucks. Thank you!!
I made one the other day with bolts and nuts instead of sockets! I love this to!
Oh I bet that looks awesome. I wanted to put bolts in the hole and wrench but didn’t have any that would work.
@Heart of it All Custom Creations that's how I did it.. I don't know how to send pics on here or I'd share with you!
@@maga_mom8066 you can email me at heartofitallcustomcreations@gmail.com I would love to see it
Very cool. I made one a few years ago and used JB Weld in a tube...what a mess that was. I did not know about the clay like you have. My hubby is a welder be trade and I even add a little silver paint where the black jb weld is. I have seen what welded lines look like. I think it looked great because he asked me did you weld this its a great job. I of course said yes.😂😂😂 But thank you for this video because now I will find the clay type you used and it will be easier. I do not sell or make videos I just have a very expensive hobby. You did a Beautiful job Sending big hugs from Sheryl in Indiana 💙🎨💙
Thank you so much!!! I would have painted the “welds” silver but couldn’t find any of mine of course lol
@@heartofitall its is amazing with or without. I am tip toeing through your backlog of videos. Hope thats ok. You have an amazing backlog. I have a severe neck injury and can not work in my studio right now. I have been layer up for about 7 months. I keep a journal for tumbler ideas and always list the makers name so if I make anything inspired by you or any artist I try to give credit if I post any pics. Since I do not have a business I am a little shy about showing my creations. Thank you for sharing your time and talent. You are amazing...you Rock my Tumbler Art World 🌎 again Thank You..hugs Sheryl from Indiana 💙🎨💙
@@gourdhead22 awww definitely watch all you want lol. Hopefully you will be able to get back to tumblering soon!!!
Amazing
Thank you!
Great project, love the look and creativity. I am curious how well the handle holds up. I want to make this
Thank you! It’s been holding up great!!
Great idea!! I will try
Love This ❤️
Thank you so much
You should make a handle with cutlery. I’m thinking a Victorian tea time type of look.
I had actually thought about doing something like that. Just haven’t found exactly what I’m looking for yet. But great minds!!
❤❤❤❤❤❤❤
Can you do this on a white sublimation tumbler?
@@cynthiahead8979 I don’t see why not
I just had that happen. I epoxied a cup and added a decal and didn’t like it. When I went to remove it it took all the epoxy off in chunks like yours. It’s still sitting there lol that’s soooo cool. I love it.
Oh no!! This is like the second time this has happened to me. Still unsure how this happens
Well, no wonder I couldn’t find it for sale.
Yeaaaaa but I can definitely make another lol
The reason your epoxy came up is because you sliced the cuts into the cup. That mixed with the thin layer of epoxy and it not being fully cured, it’s more vulnerable.
Thank you! That makes sense!!
I missed what font you said that was. It is so cute #ReplayPleaseMessageMeWithTheFontLink.
I’m so sorry I am just seeing this comment. Here is the font I used www.creativefabrica.com/product/mr-fix-it-tool-font-for-handy-men-and-women/ref/1834728/