Axe forged from steel cable - Blacksmithing
Вставка
- Опубліковано 2 кві 2022
- Back to work on Forging a Camp Axe from steel cable aka wire rope.
Sponsored by: Combat Abrasives - bit.ly/3r73P8d
Use code "Blackbear10" for a discount on your next order
Blacksmith Supply: www.blacksmithsupply.com/
Use discount code "bear5"
Anvil provided by; Fontanini Anvil
www.stevefontaniniblacksmith.com
Precut blanks for forging available from:
www.blacksmithingblanks.com
use coupon code John at checkout.
My blacksmiths apron
www.Forge-Aprons.com use code BBF
Music sourced through Epidemic sound
www.epidemicsound.com/referra...
Become a Patron - / blackbearforge
Donate - www.paypal.me/BlackBearForge
Shop - www.blackbearforge.etsy.com
Web site - www.blackbearforge.com
Instagram - / blackbearfo. .
FaceBook - / john.blackbe. .
John Switzer channel - / johnswitzer
Some of my most used gear*
Canon EOS R6 Mirrorless Camera - adorama.rfvk.net/b3yZ7v
Canon EOS R Mirrorless Camera - adorama.rfvk.net/J50gq
Canon RF 24-70mm f/2.8 L Lens - adorama.rfvk.net/6bb7yV
Canon RF 15-35mm f/2.8 L Lens - adorama.rfvk.net/rneRoG
Sony ZV1 point and shoot camera - adorama.rfvk.net/BXKMkJ
Rode Wireless Go microphone - adorama.rfvk.net/YggLRm
Deity V Mic D3 pro - adorama.rfvk.net/mxO51
Insta360 One X2 - www.insta360.com/sal/one_x2?i...
Insta360 Go2 - www.insta360.com/sal/go_2?ins...
Autel Evo II pro drone - auteldrones.com/?ref=HUB40s11...
Autel Evo Nano+ drone - auteldrones.com/?ref=HUB40s11...
*Links include affiliate links
Mailing address:
Black Bear Forge
P.O. Box 4
Beulah, CO 81023
Below you will find useful links that will help you in your journey as a blacksmith.
To find more information in blacksmithing in the US or to search for your local ABANA affiliate group visit.
www.abana.org/
Blacksmithing tools and supplies
Self contained air hammers - www.saymakhammers.com/
General blacksmithing supplies - www.oleoacresfarriersupply.com/
General blacksmithing supplies - www.piehtoolco.com/
General blacksmithing supplies - www.centaurforge.com/
General blacksmithing supplies - www.blacksmithsdepot.com/
General blacksmithing supplies - www.blacksmithsupply.com/
Square head bolts and lags - www.blacksmithbolt.com/
New anvils - www.oldworldanvils.com/
New anvils - www.nimbaanvils.com/
New anvils -
Industrial supplier - www.mcmaster.com
Tong blanks and tools - kensironstore.com/
Fire brick and refractory - refwest.com
Blacksmithing and related activities can be hazardous. These videos are not a substitute for competent professional instruction. Your safety is your sole responsibility. Always use appropriate safety equipment including eye and ear protection when working in the shop. Follow manufactures safety guidelines for the use of all equipment. In the event something shown in one of these videos seems unsafe, it is up to you to make the appropriate changes to protect yourself.t yourself.
The photography, lighting, and production were top notch on this episode. You've got a powerful grasp of more than a pair of tongs! 👍 😃
Glad you enjoyed it!
Well said!
Xxvgfxjsgffvfbvc vf what are you doing I love you
@@BlackBearForge@1:15 sounds like a good solid weld John. I was directed here from the short. Speaking of shorts, I loved the 360° tour yesterday, but could not squeeze in a question about the work bench drawers handles. Was that in a playlist? Link please. Thank you.
@@BlackBearForgeBack again. My favorite pattern from elevator cable is to cut them short after a solid weld and oriented so that the entire bar shows ends on the faces of the blade sides. Kinda like a starburst effect. And a good etchant substitute for ferric chloride etchant is cheap and environmentally safe. Stronger than normal dark tea bags boiled, not steeped.
Facebook wouldn't stop showing me your shorter videos, so I decided to just watch the long stuff. Addicting and fascinating content
When you’re too good at forge welding!
Very nice ax! I understand not wanting to be redundant in this video, but admittedly I am one who enjoys your commentary. You are an excellent teacher and your wisdom and experience is greatly appreciated! Thank you again, John!
Thanks 👍
I concur, too many blacksmith instructional videos have little explanation of the steps. I’ve learned so much and advanced so far in this craft because of instruction John. Much appreciated!!!!
The lack of pattern is a testament to you forge welding, Looks good
I don't know how to explain the amount of unbridled joy it brought me to see you wearing one of Alec Steele's shirts. Thank you for being awesome sir.
Glad you enjoyed it!
Editing is unreal! Great vid as always. I puckered up something proper when you stuck your hand in the "glowing" forge. Got me good buddy.
Thanks for sticking around till the end to see the gag revealed.
@@BlackBearForge 😱🤣
This episode was lovely to listen to. Just the sounds of you forging rough head was relaxing.
Found you on Facebook but couldn't find all the parts so I came here. Great channel and amazing presentation work.
Welcome aboard!
adding the 1095 edge into the axe after the first profiling really blew my mind
This man is a library of experience and knowledge. Thank you kindly for sharing with such a pleasant explanation.
So nice of you
The orange LED flicker in the cold forge was a nice touch!
Great video! About the shirt, l love your channel BECAUSE of the 'yak'. You have taught me so much!
you just keep getting better and better at production
The slow motion was cool 😊👍
Good morning
Morning
Morning
What I like the most is the explanation in the background. Most other videos is simply showing us what is done without any explanation around it. For laymen like me who simply love blacksmithy, explanation builds interest.
Hi John, been a while since i watched. but i'm back. you are the reason I am an abuser of metal and steel. much love from massachusetts 🇺🇸❤️
Welcome back. lots more to come
John - I really do enjoy the channel. I am constantly coming here for guidance (I’m no smith, just a beginning hobbyist). Watching and learning has allowed me to make some very small Christmas gifts and other practical items for my shop. I enjoy your conversation as well as studying your technique.
Cheers, Mark
When you're so good at forge welding that there is no pattern. That speaks volumes to your forge welding knowledge and capabilities. I know the desired result in Damascus making is that the finished product has a visible pattern but damn, this was awesome!
NOOOOOO, your Yack Yack is therapeutic... Love your commentary. you are a de-stressor after a long day in the grind.
I’m impressed. The execution, of this technique.
Alec who? Never heard of him. 😁
That's a beautiful little axe!
Clever source for an axe. We shared this video on our homemade tools forum this week 😎
I appreciate art. I can also appreciate the work my great-grandfather did as a blacksmith.
You have taught me so much about forge welding that I’ve been able to make some Damascus so thank u
Am I the only person seeing a really nice, subtle pattern on the axe? Looks great IMHO.
I'd like to see a cable pipe tomahawk. Always thought that was a really cool tool/ pipe.
Try coffee, as The Waylon and Joe show mentioned below. I see quite a lot of forgers on youtube use it. Nice ax!
Lack of a pattern just means your welds were impeccable. Great job.
Thanks 👍
Hello John
A fine little axe . Well done
Thank you for the Video and showing your work
Take care have a good new week
Greetings Frank Galetzka
Instant coffee is the Beat way to go
Well done, sir.. true artisan. Arts like this are dying , art and trade mix together, legend.
It Really Does Look Great... Thanks for Sharing. The Time on the Handle shows too
Great video! When you yack it’s relevant and helpful, others just yack. I do like the idea of the phrase and Steele shirt. Thanks for sharing this video with us!
18:10 I actually yelled at my screen 😅
Excellent work on that axe, and wow! Your editing is amazing in this video, you've come a long way! Cheers on your channel and I wish you continued success.
I must say, from a video perspective (I was in video production on an international level for 20 years) I have the utmost respect for you in how you ended this piece. 99% of talent would not have stood in front of the camera and said what you said. Kudos to you. I have been working for a year now on a journey in silver and steel (silver inlay in the handles with steel pieces) and I think your work and videos are great. Can't afford your membership until next month when I get paid. (Working horses, I broke my back twice, so I'm poor boying it until I can start selling something. Thanks so much for what you do! ...Christian
This is a beautifull little hatchet you made there!
You got me with the lights in your forge!! That was a good one! Shame the pattern didnt show, but one trick ive used in the past on cable is getting my acid hot, like near boiling for vinegar, and for my feric, i will put the tank into a 5 gallon bucket of my hottest tap water.
Great video and beautiful axe John! Thank you for sharing its birth with us!
Now you can do more hack hack! Lol!
I do wish the pattern would have been more prominent. Regardless, this is a beautiful axe! The two videos from last week and this week have been quite educational. Thanks again John!
Thank you very much!
I enjoy seeing the many variety of tools that you need and there convenient storage for immediate use!
That’s pretty cool that you show off a shirt from a fellow UA-cam channel, especially on as large as Alec’s. Axe turned out great.
Cable Damascus always looks good but it can be such a pain sometimes to get welded up. Plus it makes a huge mess from all the gunk being cooked out. 🍻
Even though the style of work Alec does isn't what I'm interested in, I enjoy watching for the entertainment value and I really admire how his hard work has led to such great success at a relatively young age. I think there is much I can learn from him
I completely agree. His video content has change over the past year or two, but he’s still very determined and hard working. Very impressive with all he has accomplished. But I do miss the older content he use to put out. Regardless I’ll continue to watch both of you.
The beginning is a very similar process to forgeing the japanese katana very beautiful work john and as always thank you for sharing your wisdom.
I really like how this one turned out, well done sir. Thank you👏👏
Well done Blacksmith a real good job on that axe prior to the previous one.
Information for whom might be interested.
Definitely recommend getting some ferric chloride and mix at a 50/50 ratio. Soak for 15min then lightly sand with 2,000 grit to remove oxides. Then do 2 more times. Results may vary depending on acid strength and how polished the piece is. If you want to get a higher contrast, a long soak (I leave 15+ hrs) in some real strong instant coffee after the ferric etch cycles.
John very nice job this project ended up turning out very well. Hard work pays off in the end. Hopefully you enjoy this for many years to come my friend. Can't wait to see more videos soon John. Keep up the great craftsmanship and hard work. Forge on. Fab on. Keep making. God bless.
Turned out great John, going to be stronger than ever. Thanks for sharing with us. Fred.
Beautiful little axe, really interesting video never seen an axe made that way before.
Perfect tongs for this
Hi John, that is a nice looking ax 👍🔥⚒
Nice work!!
I've often wondered about that patterning under heavy forging. With the steel of the cable strands being identical, I rather guessed that the acid bath probably wouldn't have best effect. The cable "damascus" seems to be at it's best left in an understated, unetched state, where it is visible only upon close inspection. An interesting (though VERY labour intensive) option, I suppose, would be to actually rewind a cable rope of dissimilar wire strands, and forge THAT into a billet.
beautiful axe 🪓 thanks for sharing always learning something new from your videos may God bless you and your family ✝️
Hey bud try using tasters choice instant coffee. That works when nothing else will. Cable is touch sometimes. I done it hundreds of times it works. Thx again nice job …
Paul…..👍🔥🇺🇸⚒
Love the post production technique of fading out the forge roar into the next scene around the 17:30 mark. Excellent auditory transition.
And we definitely need to see you make a cable pipe tomahawk! One that's an actual pipe.
I love that you can hear the difference between the first few hammer blows and when the weld takes it goes from a sort of hollow thud to a solid thunk with a little ring from your very quiet anvil
very well done, it turned out great.
FYI, Citric acid does a GREAT job, and you can buy it in granular form to make whatever concentration you need.
You continue to be one of my favorite standard all around blacksmiths along with Joey Van der Steeg. Neither of you are spending all of your time forging knives and axes, but when you do I love it. Continue doing what you enjoy, and don't worry, if you started making more knives and Axes I'd still watch.
Great looking axe! 👍
Hi John! I've been waiting for this movie for 7 long days. Now I can watch your every move. You are a professional in every way. It's nice that you pass on your skills. As an amateur, I need such films. You are making excellent tools. Thanks for the good lesson. All the best. Adam
Never would have thought of the form you were hammering into.
Forging into the V swage really helps keep the cable under control.
Incredible attention to detail and a most interesting technique used to make the axe. The final product was a thing of beauty. I must add that it was the most riveting video I've seen in a long time. It was a pleasure to see every stage of the forging. Thank you!
wow. you nailed it the quality and time that little axe is made of is what dreams are made of. Great work that not many can buy
Great looking ax and handle. I'm glad you did not use the burnt method on the handle.
I have never been a fan of burnt handles
Very nice John, finally!😄
the ax is beautiful i love it i hope 1 day i can make something that nice Mark i got a new anvil this past weekend a JHM 200 so far i love it
Excellent video! The anthology of the process has been wonderful!
The wedge design is neat as usual enjoyed your video.🇺🇸🇨🇦🇺🇸
Ferric chloride is easy to make if you are so inclined.
Hydrochloric acid (aka muriatic) should be available at most hardware stores, and the highest strength hydrogen peroxide you can find (likely at a hydroponic grow store). Mix a bit of the peroxide in and soak a bunch of iron in it. The peroxide will help the iron dissolve and the HCl will convert it to ferric.
Another etch you might be interested in is "Nital" which selectively etches the ferrite phase. Its usually 2% nitric acid in ethanol for looking at the pattern under a microscope, but for damscus you could probably up it to 10% or more.
The end result is ironically predictable. Hammered so perfectly it homogenized fully. I'm honestly more impressed by that than I ever would Be with a pattern. Every vid I watch I'm constantly in awe of your economy of movement. Not a single wasted hammer blow. Also I was struck by how many historic anvil parts the guy was able to put on your new gem but man that hefty piece of cable looked tiny on it! Also I too appreciate the visual fx trick.
It turned out great!
I like the profile of that axe, it is simple and beautiful.
Please let us know how the ferric cloride etching looks when you try it out.
Thank you for the videos, and have a nice afternoon! 🙂
Thank you! Will do!
Nice ax and handle and watching you make them is very educational to watch , and your lighting and camera work is top notch , keep up the the good work , and I will keep watching .:-)
Thanks 👍
awesome slow motion! good video!
Looks amazing even without the pattern!
Nice, that's a cool axe. Love to watch forging. I'll probably never do anything like it, but if I ever had the time I might. LOL! Great work, great channel. 👍😎
I fully enjoy listening to you as you work. I've learned so much from you and your videos.
Now that is one really nice looking little axe John with or with out the patten . :)
Hi John. Stellar job on that axe.
Old habits die hard, but you need to learn to use that flat horn you have now on your anvil. I keep noticing you struggling with things that could be easily handled on the horn. :)
Keep 'em coming. Your videos keep getting better.
Hi , John that is a beautiful ax!
John, for your next etch, try really cheap, super concentrated instant coffee. I use cafe bustello instant espresso with great results. After you achieve the level of etch you’re happy with, let it dry completely before touching it, then pop it in the oven at 225f for an hour or so.
Awesome job on the axe! Love your content!!! Thank you!!!
Wow!!! U turned chunk of cable into a beautiful axe. Forge welding i enjoy a lot. Gas forge sound hammer blows typical blacksmith's shop real sounds and forging awesome. Love this type of videos. Ferric chloride and coffee etch are good options for getting the pattern. Great work sir👍👍🔥🔥🔥
Thanks 👍
Christmas give away? Maybe?
This my way of saying I love your work.
Very nice axe!
Thank God you use metric units aswel as freedom units 🙌 so much easier to follow. 😂
That's a nice looking axe and I love the shape of the handle. Great video and photography.
Stunning work as always!
An easy way to get (mostly) ferric chloride is to react a large amount of forge scale with hydrochloric acid (aka muriatic acid). Beware of all safety issues with handling acid and the gasses released.
The resultant solution is a mix of ferric and ferrous chlorides which can be used directly to etch pattern welded steels. The ferrous chloride in the solution will gradually convert to ferric chloride through contact with the air
Metallic iron reacts with acid to liberate hydrogen. Generate the ferric chloride in a WELL ventilated area that has no flames or sparks. BTW, the conversion of ferrous to ferric, via air oxidation, can be accelerated by employing an aquarium pump and air stone.
John, FANTASTIC video, as always. That came out to be a really nice blade. I watched the last video and started to wonder why you were welding in the 1095 cutting edge. I guess this isn't the ultra high tensile strength cable that you spoke of on that last video. I was also impressed with the flap wheels that Combat Abrasive sent you, It looked like they really shape steel quickly.
THANKS for another GREAT video!!
The cable is the same 1095 extra improved plow steel as the last little axe. Just like in that previous video i added the single piece cutting edge to avoid any issues with the thousands of little cable ends right at the cutting edge
Even though the pattern doesn't really show, it turned out great! You do nice work! Enjoyed this video! Thanks, John!
I've been a subscriber for about a year now. Your wire rope axe is an excellent piece of work. 👍
Thanks for the videos! Always enjoyable.
I'm glad you had difficulty with the first axe and grateful that you showed it. I learned more from that and watching what you did differently than I could from watching a perfect effort five times. Thanks for the great lessons.
I do like the shape of the axe Bear Dude! TFS, GB :)
Beautiful. You continue to inspire. Thank you, sir.
Beautifully made!
I love your technique and control when you first start to weld the strands together
Very nice clean looking axe!
Awesome stuff!!! Love it.