Damn, the reverse lights are bright. Good video. Two comments: -1.) I would have cleaned the light well before installing the new assemblies, and 2.) the first thing I do when I get a vehicle is remove the dealer badge and/or stickers. I don't advertise for anyone, especially for free.
I had the same exact lights. I removed them after 6 months after the seal on the right one went bad and allowed water to get inside. Discolored rather quickly and most lights shorted out. Resorted back to the factory lights with led bulbs.
I like how these taillights look. Did u ever find where u got them from? I really like how they fan out when the turn light is on. I’m looking for a nice set for my Chevy. Please help.
I have had these on for two weeks. Already had both sides fog up with moisture. However I still like the lights they look great. My right side will throw a failure code and hyper flash sometimes doesn’t happen every time. Have you had this issue? Thanks!
Btw I got those same lights on ebay for my 2014 Silverado and sent them back 2 weeks after........they started to flicker and condensation started building up inside. Hope yours handled better then mine did.
Yea that sucks man I haven’t had condensation in mine only my left one hyper blinks and all I gotta do is put a new resistor in it I love them I’m sorry that you had that problem
Did my research. 1⭐️ review. All the review said water get inside them. Out of stock most wed sites. Part# alt-on-cs14-lbled-bsm. But they do look nice. I’ll pass on these
Did my research. 1⭐️ review. All the review said water get inside them. Out of stock most wed sites. Part# alt-on-cs14-lbled-bsm. But they do look nice. I’ll pass on these
I think that they are great lights, my left turn signal does hyper blink but all it needs is a new resistor I have heard reviews about them leaking and I have had none of those problems no condensation or anything I would say there is better quality lights that you can buy but I love the ring so if these just need new resistors in them I’m willing to just put new ones in I think they are great
ElCaptain 420 the resisters are built into the housing. Badly though. Mine broke in less than 2 weeks. I like them so much though I might order another pair and replace the resisters.
Gonzalo Curiel yes. I did but not right away. Mine lasted 9 days then went to crap. All the resistors inside the light came loose. I returned them. Poorly built and it’s a shame. They looked really nice while they worked.
So if you already have led lights whats the difference with aftermarket leds?? Driver sode just went out on my truck ..there saying 500$ for a new tailight that after market leds would send a code on the dash
After market leds should not send a code on your dash the only way thy would say something is if it hyper blinked but just don’t buy the cheapest aftermarket ones you can find and you should be fine
i have a "connection" where i got my led antihyper flash bulbs for the rear and the switchbacks for the front. $35 for each pair. what a savings. compared to 55+ for a pair
Glad to hear! How are they holding up all these years later? Any issues with moisture or water leaking into the lights? Also, in the video, the lights look faded and orange, almost a yellowish red color. Is that how they look like in person? or are they a deep red color as advertised? Last question. Are the lights a deep bright red color in direct sunlight? Ive seen many review photos of these taillights in the sun and they are all extremely DIM. So dim in fact, that i couldn’t tell they were even ON! I hope that’s not the case.
KYDuramax502 I had this same set. They look awesome. They also only lasted 12 days till all the resisters came loose. I would have loved to keep them and replace the resisters but I don’t have the skills. If you know of any UA-cam videos that may teach me how to replace them I’d love to give that a shot. Thanks.
same thing happened to me. you can go to diodedynamics.com or theretrofitsource.com and order a set of resistors for each tail light. there are a few videos on youtube on how to install resistors for tail lights and silverados. mine work fine now besides the fact that water got inside the right tail light and damaged some of the LEDs on the DRL strip
Ken Butts not really but i know the water pools up at the bottom of the tail lights because my friend also has a set for his silverado and his were also damaged by water. your best bet would be to buy some butyl and try to seal them like the factory tail lights are sealed before you install them
Looks great, you should debadge Chevy badge and Silverado badges.
Keep the chevy emblem
🛰
Made me cringe when you didn’t clean behind the lights
Yeah would have taken 30 seconds
Made me cringe that in 2019 this video isn't HD. Or is that the iPhone HD everyone talks about?
😆 for real tho,come on man 😆
Damn, the reverse lights are bright. Good video.
Two comments: -1.) I would have cleaned the light well before installing the new assemblies, and 2.) the first thing I do when I get a vehicle is remove the dealer badge and/or stickers. I don't advertise for anyone, especially for free.
I had the same exact lights. I removed them after 6 months after the seal on the right one went bad and allowed water to get inside. Discolored rather quickly and most lights shorted out. Resorted back to the factory lights with led bulbs.
Dave Logan what are they called?
Maybe post the link in the title on where to purchase these lights.
how much were they? where did you get them? what make are they? fuck man, basic shit to tell us.
Can you post the link on where to get them? Looks good. I got the same exact truck accept I have Berliner.
Were did you got the light they are real nice
Nice video dude
Spyder ALT-ON-CS14-LBLED-BSM
Its boss baby all grown up
SLOW VQ Lol 🤣
You even old enough to drive?
Don't buy these garbage lights that burn 2 or 3 months of having them installed
Where did you order those tail lights from? I’m looking to put some on my 2015 Chevy.
I like how these taillights look. Did u ever find where u got them from? I really like how they fan out when the turn light is on. I’m looking for a nice set for my Chevy. Please help.
Car Id has them. I got mine there. Great light no leaks.
It tells you before you buy the lights to silicone the back of them to keep weather issues from happening. It's in small letters
Soo what are they?????? How you make a video and not tell us what the hell they are
My god you look just like my nephew, he’s 7. 🤣
Looks great! What brand and where did you get them and how much?
Keep it up dude nice video
Can You Give Me The Link To Buy The Tail Lights? Thank You
I have had these on for two weeks. Already had both sides fog up with moisture. However I still like the lights they look great. My right side will throw a failure code and hyper flash sometimes doesn’t happen every time. Have you had this issue? Thanks!
Btw I got those same lights on ebay for my 2014 Silverado and sent them back 2 weeks after........they started to flicker and condensation started building up inside. Hope yours handled better then mine did.
Yea that sucks man I haven’t had condensation in mine only my left one hyper blinks and all I gotta do is put a new resistor in it I love them I’m sorry that you had that problem
eBay is cheap, I got mine off Carid
Where did you get them at
I put in the morimoto smoked taillights and headlights and it’s completely badass!! A little expensive but it’s well worth it!!!
Did my research. 1⭐️ review. All the review said water get inside them. Out of stock most wed sites. Part# alt-on-cs14-lbled-bsm. But they do look nice. I’ll pass on these
What the name of the rear lights
Did my research. 1⭐️ review. All the review said water get inside them. Out of stock most wed sites. Part# alt-on-cs14-lbled-bsm. But they do look nice. I’ll pass on these
Now that you’ve had these for awhile what do you think of them? I have seen several negative reviews. Thanks
I think that they are great lights, my left turn signal does hyper blink but all it needs is a new resistor I have heard reviews about them leaking and I have had none of those problems no condensation or anything I would say there is better quality lights that you can buy but I love the ring so if these just need new resistors in them I’m willing to just put new ones in I think they are great
Any update on the lights? No moisture or leaks? Thanks!
Update on the lights no moisture or leaks just hyperblink
@@jrvlogs9654 how do you fix the hyperblink? I’m having the same issue
Who makes these?
Update: found them on Amazon
Music is only thing killing this.
No shit lol
Awesome break light do those need resistors for the LEDs?
ElCaptain 420 the resisters are built into the housing. Badly though. Mine broke in less than 2 weeks. I like them so much though I might order another pair and replace the resisters.
My reverse light comes on when I apply my break and they suggested to add resistor to it help. I love the look of them but they are made cheaply.
Ethan Weesner yes they are. They could be awesome but let down by the maker.
I put them on my 2018 Silverado and got turn signal failure on dash anyone else have that issue
Gonzalo Curiel yes. I did but not right away. Mine lasted 9 days then went to crap. All the resistors inside the light came loose. I returned them. Poorly built and it’s a shame. They looked really nice while they worked.
Omg 😍 looks really awesome 👍🏽
I just picked up this trucks twin in mint condition with only 45.7k miles.
WHERE DID YOU BUY THESE AND WAHT ARE THEY CALLED
Looks great! What brand are they?
Guys can I have the company name of this light
I bought them off Amazon I think a different company makes them now but if you look up 2017 Chevy Silverado tail lights on Amazon you will find them
Looks good kid
What is the brand name of lights
Lose the music...
Are these Made in China, grasshopper?
I installed these and my reverse lights stay on all the time even when the truck it’s turned off anyone has run into this issue?
So if you already have led lights whats the difference with aftermarket leds?? Driver sode just went out on my truck ..there saying 500$ for a new tailight that after market leds would send a code on the dash
After market leds should not send a code on your dash the only way thy would say something is if it hyper blinked but just don’t buy the cheapest aftermarket ones you can find and you should be fine
Have you had any problems with them taillights??
Nice lights... 👍👍👍... But you never said where you picked them up at.
Amazon
Can I have the name of that light from Amazon
where did you buy them from
Bulbs are different on 2018
My Quickjab209 it works on the 2018. I have a 2018 and I have the same lights.
How are you liking them now? If you still have them
What kind of tail light is that cuz I have 2013 Chevy silverado LTZ would that fit in my 2013
i have a "connection" where i got my led antihyper flash bulbs for the rear and the switchbacks for the front. $35 for each pair. what a savings. compared to 55+ for a pair
Anyone else doesn't like the black part on the headlights
Nice vid, but wheres the link for the tail light?
I bought them off of Amazon
What's the damn name of the lights geez
👍🏻
Looks like gmc now hahaha looks ugly my opinion
What tail lights are these?
What's the name of that new taillights you have I like it cuz I have 2013 Chevy Silverado ltz
Want style is that . I have a 2018
My trucks a 2017
Nice .were can I get those taillights
Do they fan when you step on the brakes too
Did the tail lights last. Some of these aftermarket Chinese ones don’t last longer than a year
You need to relax.. its really hard to understand what your saying. Looks good.
JR PLEASE!!!!! ARE THESE THE GUNMETAL SMOKED OPTION??
I have these lights n you have to get resistors installed n
Don’t they come with resistor already build in?
I get mine tomorrow 😎
Very nice
Made in Taiwan....
I want order it
Link to buy them please
White lights did you use for liscense plates?
Nice video. Have a great day. where did you buy the taillights
But that music lmao
Looks great 👍👍👍👍 where and how much you pay
Cool!
Signals???????
Where did you order them from? What website?
MrRock_ N_Stock23s get from ebay
Got the same ones bin having for a while now they super bright 👌
Glad to hear! How are they holding up all these years later? Any issues with moisture or water leaking into the lights?
Also, in the video, the lights look faded and orange, almost a yellowish red color. Is that how they look like in person? or are they a deep red color as advertised?
Last question. Are the lights a deep bright red color in direct sunlight? Ive seen many review photos of these taillights in the sun and they are all extremely DIM. So dim in fact, that i couldn’t tell they were even ON! I hope that’s not the case.
@@Amokof only lasted a year 😂
@@Lowered17chevy That sucks to hear 😂
Underglow lights ..??? Please don't LOL
where can i buy these taillights
www.amazon.com/ACANII-Sequential-Signal-2014-2017-Silverado/dp/B07GC88CTB/ref=mp_s_a_1_45?keywords=2017%2Bchevy%2Bsilverado%2B1500%2Btail%2Blights&qid=1577520719&replacementKeywords=tail%2Blights&s=automotive&sr=1-45&vehicle=2017-47-491------------&vehicleName=2017%2BChevrolet%2BSilverado%2B1500&th=1&psc=1
Too bad the resistors are crap on these taillights.
I end up replacing both side with new ones.
KYDuramax502 I had this same set. They look awesome. They also only lasted 12 days till all the resisters came loose. I would have loved to keep them and replace the resisters but I don’t have the skills. If you know of any UA-cam videos that may teach me how to replace them I’d love to give that a shot. Thanks.
same thing happened to me. you can go to diodedynamics.com or theretrofitsource.com and order a set of resistors for each tail light. there are a few videos on youtube on how to install resistors for tail lights and silverados. mine work fine now besides the fact that water got inside the right tail light and damaged some of the LEDs on the DRL strip
Jay Gatsby thanks for the info. Do you have any idea where the water got in at?
Ken Butts not really but i know the water pools up at the bottom of the tail lights because my friend also has a set for his silverado and his were also damaged by water. your best bet would be to buy some butyl and try to seal them like the factory tail lights are sealed before you install them
Anyone know if I can get similar tail lights for a 08 Silverado 2500?
Those lights look sweet dude!
function test??!?