@3:35 is roughly the brief explanation of how you would go about installing these on an evo X. its not always helpful for others to make a super in depth install video for a very universal part. This was mostly a product showcase and updating the fans on what new stuff went on the car!
Where is the afr plug located? Under the passenger side carpet ? They said it can just plug tht in and does tht mean I don't need to install the actually o2 sensor?
can you just start the car up right away or do these gauges need to warm up turning ignition half way? And if only turning ignition half way in acc for a while does that damage the sensors?
you can start up right away. the AFR is the only one that warms up and you'll see it on the display. the other two are just pressure sensors. Sensors may fail over time naturally or run for the rest of the vehicle life. it's all variables like weather, abuse, location, etc. Sensors would not be damaged while in acc mode.
the aem x series boost gauge is ass and I mean that because the sensor sucks ass. I went threw 2 sensors in a few months and didn't replace it for a 3rd time bc I traded my older sti in. wideband works awesome though.
yes it's safe if done right. The pod pillar will just get pushed away with the A pillar and bags will still deploy normally. if anything, the cables will need some slack as to not make it a pivot point that will swing the pillar pod off of the A pillar to slash your eyes.
En solo horas lo deseo mío con mi corazón lo deseo en las calles de san Pedro lo deseo mío lo decreto así será lo deseo yo me prepare para tener lo deseo mañana un sueño hecho realidad para mi lo deseo con mi corazón nadie lo ha decretado más que yo lo deseo de que Dios me va a bendecir enorme el universo ya me lo dijo estoy preparando para tenerlo en las calles de san Pedro lo deseo mío con mi corazón lo deseo siento mucho más que ♥️♥️♥️ yo siento que será mío
They managed to do a whole install video without actually showing you how to properly install anything.
That was exactly what i was thinking.
to be fair, title just states installing and not how to install.
@3:35 is roughly the brief explanation of how you would go about installing these on an evo X. its not always helpful for others to make a super in depth install video for a very universal part. This was mostly a product showcase and updating the fans on what new stuff went on the car!
So you can tie all 3 gauges in one fuse tap? What size fuse would you use for the gauges? And we’re you able to tie all 3 grounds into one as well?
Thank you for this video! Helped a ton on a evo im working on at our shop 😎
Glad it helped!
How come my three gauge pillar pod doesn’t sit in nicely?
is the boost sensor same as the oil one my boost one says 50psi and my oil one syas 100psi but they loook the same and dont wanna get the wrong ones
Was that a Fto in the background?!?!?
Where is the afr plug located? Under the passenger side carpet ? They said it can just plug tht in and does tht mean I don't need to install the actually o2 sensor?
Kevin the dude!!!
Hey was wondering if you guys sell a tri pillar gauge pod for a evo x? If so id like to buy one ☝🏽
Do a gauge installation on evo 8/9s plz
lets see the hawkeye project
How do you get rid of the gap at the top? Even with it taped tight it pulls the oem pillar down from the weight
@s s you will need to end up cutting holes in your stock a pillar for a flush fit. It's the only way the top piece will hold the weight
W vid
Wait, is that an FTO?
can you just start the car up right away or do these gauges need to warm up turning ignition half way?
And if only turning ignition half way in acc for a while does that damage the sensors?
you can start up right away. the AFR is the only one that warms up and you'll see it on the display. the other two are just pressure sensors. Sensors may fail over time naturally or run for the rest of the vehicle life. it's all variables like weather, abuse, location, etc.
Sensors would not be damaged while in acc mode.
So basically the pod clips onto the stock pillar,and you dont switch it,right?
you can get full pillar replacements also but they're usually made to order or you have to send yours in for mod
i am building one sinilar
Deseo deseo un gran objetivo para mi lo deseo
the aem x series boost gauge is ass and I mean that because the sensor sucks ass. I went threw 2 sensors in a few months and didn't replace it for a 3rd time bc I traded my older sti in. wideband works awesome though.
How would you rate these to GlowShift Pillar Gauges?
@@gemini4lyfe3001 anything better then glow shift
@@TheSibster86 whats wrong with glow shift?
@@gemini4lyfe3001 you get what you pay for is all I’m saying
@@TheSibster86 thats anything that dont tell me why theyre worse than any other brand
Is that location safe due to air bags in pillars?
yes it's safe if done right. The pod pillar will just get pushed away with the A pillar and bags will still deploy normally. if anything, the cables will need some slack as to not make it a pivot point that will swing the pillar pod off of the A pillar to slash your eyes.
Frist like an comment
En solo horas lo deseo mío con mi corazón lo deseo en las calles de san Pedro lo deseo mío lo decreto así será lo deseo yo me prepare para tener lo deseo mañana un sueño hecho realidad para mi lo deseo con mi corazón nadie lo ha decretado más que yo lo deseo de que Dios me va a bendecir enorme el universo ya me lo dijo estoy preparando para tenerlo en las calles de san Pedro lo deseo mío con mi corazón lo deseo siento mucho más que ♥️♥️♥️ yo siento que será mío