RTX 3090 Ti MSI Gaming X Trio - REPAIR and FIRST impression
Вставка
- Опубліковано 20 сер 2024
- 👉Need a repair? krisfix.de/en/...
👉KrisFix Shop: www.gpufix.de
👉Question about repair: service@krisfix.de
👉Need Help? Book your Technical support here: support@krisfix.de
👉 Leave a tip for us if we've helped you out:
-PayPal : www.paypal.com...
-ETH: 0x03FFa9DF33F4edcE958a0729B30Dd5A9241DeFE2
#krisfix #gpu #repair
Pictures: www.techpoweru...
The level of expertise this guys has is phenomenal. There are tons of UA-camrs generally just short expert. If any component is short they would just fix it. If problem is other than short the gpu is plain dead for them. But this guy has taught me a lot about other problems. His success rate is high. I am sure he would grow a highly rated channel with time.
Hats off to this guy, never seen a board repair like this brilliant, would be the only place for me to send a card if I broke it Bravo sir. you definately need more subs
Great , great video , you are number 1 now in all UA-camrs fixing videos , fantastic and thanx
Absolutely number 1
Northbridge fix is also very good at fixing elecrronics
i have been watching since January when you just started UA-cam and with around 200 subscribers I'm happy to see how big community you've grown in your channel reaching 2k + subs❤❤
Beautifully repaired, i'm deeply impressed by your skills, keep up the good work! You amaze me every time again!!
Same here man I love his work...
cant believe the gulf between this and other youtubers I have watched, truely a craftsman.
youtube has a lot of content ;)
You repaired my MSI 2080Ti this week, can't wait untill it arives!
I hope you enjoy it for a long time
Came from Debauars video, man you have some serious skills. What an awesome channel and content, can't wait to watch your backlog and future videos.
Отличное видео и великолепная работа))
awesome work again! nice new camera angle. groovy music with the uv light too.
A very, very good job ! Thank you !
Amazing job as always. First time i see fixing the fingers, great job over there as well.
You are amazing! So impressed from your knowledge and skills!!! Thank you for the pleasure watching your way of fixing that beauty!
Almost like a gamer video
Mission: restore power.
Difficulty: medium
Boss:RTX
Keep doing what you're doing. Amazing work!
Професионално и прецизно какво винаги. Респект !
Welcome to my life dude! Epic repair!!
Beautiful job really... MSI will contact you for sponsorship soon i bet on it 😁
I wish you put the 3 pin removal process in the video as I believe its a very hard and delicate work to be done, I had a blown fuse in some amd card and interestingly nothing was wrong and no issue on thermal camera upon injecting current. Card brought back to life by changing that fuse but I still cant figure out why cause the issue, maybe some high load on mining? God knows.
Yeah it looks like he actually removed the PCB under the traces somehow cut it lol
Probably spikes
@@KrisFixGermany I appreciate all the videos Kris you've tought me alot you've been a huge help.. I come in every night and check your channel always look forward to another video. Keep up the good work man your undoubtedly the best I've seen on here..
Richtig gute Arbeit, Respekt 👍
I can't agree more. MSI and EVGA has the best gpu build/components, even tech cemetry says it. Having multiple fuses is really a plus!
It’s impossible to have worse build quality than NVIDIA. 100% of cards are defective out of the box. None can mine full speed without overheating, and fixing the defective cooling is trivially easy. So it’s intentional cost cutting quality failures and planned obsolescence.
The FE cards are built well actually, it’s just bad thermal pads
@@Multimeter1
There are some pretty clear quality control issues, too. When you crypto mine with FE cards, bcs they are FHR, you find that every card you fix is a lot different both in performance and subtle physical attributes. I have three different shim fixes I use, and it’s impossible to guess which will work best because the pad depth needed is different every time. There is a way to accommodate any card with a hybrid pad/shim, but it will only reduce temps by 25-30C instead of a best case 40-45C. You also see A LOT of sloppy soldering, which might be the cause of the huge range of performance outcomes among cards operating at the same temperature set.
@@FFE-js2zpI’m glad it’s trash for mining and I’m glad miners buy defective cards 👍
Thank you Kris for telling us which cards are better. What could be better than a person who fixes 20 cards a day and he tells you what he likes about a card. Usually it is something the owner does which botches a card. But on some something is faulty with the card before they even get the card.
It has also single sides memory chips which makes cooling easier
thank you very much , i love your work 👍
great job!
I just found this channel recently, really enjoying the vids! Enjoyable to watch and informative as a modder.
I agree about the MSI 3090Ti PCB, great design. I passed up everything else for a Gaming Trio because the board is just so nice and practical. Even with 560W PL via shunt stack, those MPS 70A Power Stages are barely outside their peak efficiency zone!
this man is the best on the world!
This is not a repair that was art
Now i know which cards to purchase for premium components. Go with MSI gaming X series gpu's
Very satisfying and educational videos, I look forward to seeing more, thanks for sharing your work and talent.
excellent 👍
I was hypnotized while watching your health!
good job Teodor!
amazing as usual!
great video, than you for all the work!
Just a (somewhat late) input: absolutely every 3090Ti from every manufacturer (Palit/gainward, asus, msi, giga, evga, zotac, etc) uses the same 16-phase power controller and same 70A power stages from MPS. The only difference may be in the number of the power stages. This is the only occasion that I remember in 10+ years that it does not really matter who made the card, the powering system components are identical across all of the models. Good news for second-hand buyers, I guess - you can literally buy any 3090Ti by its looks and be sure that powering is adequate.
NVidia was testing their power delivery system for the upcoming 4090 chip + they made users familiar with the new 12VHP connector, so they mandated powering system as well. Even on 4090 nowadays we can encounter powering that is WORSE compared to 3090Ti - e.g. palit, gigayte eagle.
great content as always ! keep it up !
nice video👍👍👍👍
Amazing Work. Just a master!
You are amazing kris ♥♥♥♥
Super
Amazing skills
fantastic work. what silicon did you use under the finger pads?
Two component epoxy
Great job 👍👍👍 how did you remove the tracks from the spare card and make them so flat?
Cnc milling
Funny about the no warranty.
That is illegal. Literally, they cannot claim any warranty voidance if the card was opened. It was a long time ago, but laws have changed.
Now, companies, will still try and abuse ignorant customers and bullshitting them about this, but people should wake up.
In the case of EU customers, there are law protection agencies at work. in the case of US customers there are file a lawsuit.
The voidance of the warranty can be done on a defect and not if the product was opened.
They must see what doesn't work and if it doesn't work what is the cause, and the weight falls on the manufacturer to prove beyond a reasonable doubt the user interference caused the defect.
A mechanical action that did the damage. Not just by opening up.
Awesome!
cool
Do you have any plans of doing live streams again? I really enjoyed those
I have no such plans at the moment
Chris: My 3090ti EVGA card melted at the power connector. The molex itself is no good. I brought to a local fellow to get him to replace the molex...he tried but could NOT even get the solder to melt using his equipment. He mentioned that an oven might need to be used to remove the solder...or find out wha tthe proper solder temps are. Are you familair with removing the power molex on the card and had any troubles??
U999928 what was the PCB designer guy smoking?
Amazing expertise. I suppose that's what you get when someone works for the love of their job, not just for the sake of earning money quickly.
By the way, what type of glue did you use for the three 12V fingers?
This pins did you get it from an old card? Or supplier did you have to cut them out and grind down to thin 1 layer pcb
I use cnc milling from the bottom side
@@KrisFixGermany this is something you could show us once 2 very interesting how you do it and if you do it every time special for one purpose or as a bunch of pin
Beautiful repair! May i ask what is the grinding tool that you have used to grind soldermask off please?
I was wondering the same thing myself every tool I've used isn't as precise as I would like and has tool bit wobble.. I've had to repair two 2080 TI's with cracked PCIe's and it took way longer to repair the traces than it should have because of the tool..
I think is QianLi
@@KrisFixGermany Thank you very much! Appreciate the answer! :)
Hot bunch of technik
Hello Kris! Michael here from New Zealand. Have you come across 3090 with 11.9 ohm on FPVDDQ rail? This card has micron ram and had small moisture damage near u17 ic. I am not sure to power card on and try test with mats as I am not sure mats will work with card. Many thanks
each case is individual, I cannot help you if the card is not here
@@KrisFixGermany thank you for the kind response. I will have to try find how to run Mats on 3000 series cards as I don't think my mats can currently support. Card does have all other voltages present so perhaps I might get lucky and one ram ic is pulling down the line. I've fixed many graphics cards already and your videos have helped me so much but am new to 3000 series cards. Thank you so much for all your videos. You are definitely most professional I have seen. And I have listened to your advise about not using too high temp hot air on ram chips.
Does RTX 3080 Suprim X has same quality components?
The components are not the same
@@KrisFixGermany yep just checked that this morning..Does it mean that is a bad graphics card and prone to failure?
Judging by your vids seems to me we will have more and more rtx 4080/4090 series geting bad...
@@KrisFixGermany Bro which card has better components and less likely to fail MSI Suprim X or Palit GameRock both RTX 3080?I wana buy one of them.
@pcpartpicker FE or Asus
@@KrisFixGermany Not selling those here..I must choose between 2 above
Why did you Stop explaining what you were doing and started PLAYING MUSIC ?????????
There was nothing to explain 🙂
...
Good job
Love that porn music!
Very nice video, and great under-bonding technique. I think @retrogamemodz would approve :D
Hi Kris, thank you so much for your videos and dedication, you are a great help for those who can´t get out of our countrys to study what we love, like me, i have a problem hope you can help me, i have an asus strix 3090 with no video out, it give video when put PEG graphics for the first time, after that nothing, when i run mats it give me the next error: "Found device at domain 0 bus 0 device 2, but its memory cycle enable bit in" and gets in prompt. All the voltages are ok but i got nothing with the scope, in all phases. What should i do? hope you can help me, i really need to fix this graphics card. Thank you so much.
Mats doesn’t help with 3000 series. Use nvmt
@@KrisFixGermany Yes i did it and found training errors on channel C with a number 2, according to your videos is C0. thank you so much for your answer, greetings from Argentina!