Making a plywood Kayak - ベニア板からカヤックを作る -
Вставка
- Опубліковано 8 тра 2022
- Hi! I live on an island in the south of Japan.
Ishigaki Island has a very beautiful sea!
Introducing my self-built kayak.
It is a kayak made of materials that can be bought at the Home center. It's cheaper than buying a plastic ship and you can kayak to fit your size.
Please challenge everyone. enjoy!
こんにちは!
石垣島で物作りを楽しんでいます。
今回はベニア板からカヤックを作ってみました!石垣島の海をもっと楽しみたい。けれど、プラスチックの船を買うだけでは嫌だな、、、と思い、木造艇を制作してみました。結果、時間はかかりますがプラスチック製より安く、軽く、自分に合ったサイズ(軽トラに載せれる設計)で作ることができました。薄いベニア板でも、モノコック構造にすれば強く波をこえられる船を作ることができます!是非参考にしてみてください☆
#Kayak #DIY #Woodwork #ishigaki #石垣島 #カヤック #自作カヤック #カヤックの作り方
#Seakayak #シーカヤック #フィッシングカヤック #Fishingkayak #plywoodKayak #adventure #冒険 #キャンプ #海のある生活 #Handmade
#ハンドメイド #沖縄海 #木造船 #Woodenboat #boat #SDGs #廃プラをなくそう
Very beautiful kayak...
Great video! Beautiful boat & wonderful talent. Thanks for sharing
欲しいものがあったら作っちゃう。
人間ってすごいなって思いました。
素晴らしい動画でした。
Watching this kayak being built is so satisfying, thank you for sharing your method and knowledge you are such a great man
beautiful.
Also, I've never seen a handmade wooden plane before.
Не мог выбрать, послушать ирландскую музыку или посмотреть как кто-то строит каяк. А тут такое!
I will take one if you come to America to build them in America
Thanks for sharing 👌
Great job, loved how you used the water bottles.
wonderful
You done a vary vary good job thanks
Wonderful job
Like from India west Bengal
What a neat job! It was pleasure to watch!
thank you!
Japanese people are good at detailed work😂
素晴らしい
ありがとうございます!
感動しました!素晴らしい!
ありがとうございます!やればできるものですね!
綺麗に、しあがりましたねー カラーリングも、いい味 出ててセンス感じます。
カッコイイ!!海に、出るのが愉しくなりそう。
ありがとうございます!特に着色はしていないのですが、エポキシコーティングで木目も立ちグッとしまりました!
凄すぎて感動しました!
ありがとうございます!
凄いように見えますが、ほとんどはコツコツ作業でした(笑)
『いつかできる…』と信じて… 長い時間かかりましたが、終わってしまうと寂しいものですね。次の船を早く作りたいです!
Impressive quality!!
I was touched by that comment.😭💕
見事なカヌー作りチャレンジして見ようかと❗️ありがとうございます😊
コメントありがとうございます。
ぜひチャレンジしてみてください☆曲線ができてくるとニヤニヤがとまりませんよ😁
Great jobs...👍👍👍👍
Thank you for all the comments!
Show!
Like from padova, Italy
Grazie.I have been to Padova!
I was traveling around the world by bicycle.
THANK YOU!!!!!!!!!
you're welcome👍
Very fine work, do you have a dimensions by any chance?
You really need a mask with a sufficient filter, and good gloves! and eyeprotection! for working with this epoxy/glassfiber! Longer exposure to this can give you chronic skin problems! i was in school learning how to do this, the same place where they prepared people to make windmeals for fx Westas!
😱 excellent work!
Thank you for watching the video!
Thanks for sharing this proof of god’s being
私も、15年ぐらい前に、防水ベニヤ板3mmぐらいの厚み?で作りまうした。今ほどUA-camに資料が少なくて、チェサピークの本を図書館で借りて、ごく小さな絵を参考にした程度です。都内のホームセンターで3枚購入。スカーフ削り出して、見様見真似で接着剤でまとめました(笑)最近、解体するまで、接着は完璧に接着してくれてました。水漏れもなく、遊べました。9kg、3.2m長でした。自作艇はとても面白く学習効果も高い
改善したかったのは、前後2分割にしたら、小さな車にも収納して行けたはず、そんなに強度なくても静水用なら作れます。ベニヤ板と接着剤で2万円ほどでした。富士五湖、日光などで漕いで気持ち良く進みました。
コメントありがとうございます。
現在石垣島に在住していますが、防水ベニヤがこの島だと手に入らないのですよね。。次回は少し厚みを持たせ5mm厚くらいで2、3人乗れるカヌーも作ってみたいです!
Best bos
Thank you!
Do you have a blueprint of the kayak that you built and are they for sale to be downloading?
こんにちは。
素晴らしい動画です。
私も挑戦してみたいのですが、石垣でこのサイズのT1合板ってどこで買えますか。
メイクマンの2.5mmベニアで作りましたよ!基本的には石垣のホームセンターで一般的に手に入るもので制作しています。ガラスクロスはキダ紹介さんのプロコーナー奥にあります。島で手に入らないものはエポキシ樹脂です。
ありがとうございます。
エポキシはしんえいさんにありました!
I want to make my self- built kayak but you are send to pattern for me
I didn't make a template.
After determining the length and width of the ship, the rest is taken from the natural curves.
The next boat wants to write a drawing.
Thank you , from northwest Ohio America. Detailed plans available?? For free ???❤
Thanks for your comment! A patch-and-glue boat does not require a detailed plan.
Once the length and width of the ship are determined, the dimensions are determined from the naturally formed curves.
I decided the size of the boat to be legal enough for a car and then started!
Hello. Could you please if possible, share your plan. I would like to build one like yours. Thank you!
If u watch the video carefully, its already have a plan in the video..
Thanks for your comment!
Dimensions are in the video.However, this manufacturing method does not require detailed drawings.
That's because the side plates are made with natural curves.
If you decide the total length when you start, you can make it using the natural curve.
Thank you for watching the telop!
べニアにしろスキンカヤックにしろ、最後は、FRP加工なので、工房がないと無理かな・・・、においが・・・。
FRPより価格が高いですがカヌーやカヤック作る時はエポキシがいいと思いますよ。匂いもほぼないです。紫外線耐性や硬度もFRPより優れてると思います。