Add 1 Independent editable mono line for the input, so one can make a bigger stereo sound, that would be really good. Like having two separate FX paths from the same input.
Highly considering a purchase however i am wondering. The usb c port can also be used as a mobile interface to connect and record to a cell phone or for live streaming correct?
Did someone try to put external effects in SEND / RETURN loop? I experienced a lot of hum noise (not depending by pedals) with same setup I always use with another modeler. I do not know if it is general issue or it affects only my unit....
Two thoughts. 1/ I hope the foot switches don't need a heavy stomp because I play in my stocking feet at home. 2/ I hope the global settings are saved with the patch because I play acoustic & electric guitar, and fiddle. Probably not!?
Help me please In Stomp mode Can on/of mudule more than 1 module Ex. Crtl 1 stomp for on drive and on delay together. Crtl 2 stomp for on Reverb and drive same Crtl 1 but low gain more than Crtl 1
Hello. Just ordered one. Looper is not getting covered in any other video I watched so far. Basic question: can I change presets while looping for a different overdub sound? Is there or will there be an option for a looper countdown (drum synced)? thks in adv
The first question: yes, you can. After recording the original track, during playback, step on C+D again to step on the pegs, exit the switching tone, playback will not stop, after switching to the specified tone, step on C+D again to return to the loop can be superimposed using the switched tone, need to pay attention to if you use a different tone to record a different track, you should set the loopers to the back. (The maximum recording time is 45 seconds) The second problem is yes. There is a “Drum Machine Sync” option in the looper interface. Turn on “Drum Machine Sync” in the looper interface, and start recording when the drum machine has finished playing at the beginning of the bar, and make small adjustments to the recorded phrases so that they are aligned with the drum machine. Note that you need to turn on the drum machine before starting the looper.
Thks for replying. I´ll be having mine somewhere next week, at the time only avail through amz de. Next user manual revision make it clearer (looper details), will benefit all (incl yourself) it would easier to edit with the knobs if you had a general option to additionally step up on turning (+10,-10) instead of only (+1,-1). Otherwise most reviews I´ve watched there´s a few (not many) firmware fine tuning adjustment to cater for- ex effects small text lettering below their graphics in edit preset and/or stomp modes (not much screen space, I know, and the pc app does show them): Reviewers videos you´ve sent units to are commenting a few improvements.
Hi, we are so sorry for the wrong answer before, here is the modified replies: 1, it has split paths. 2, yes, it features gapless switching in preset mode.
@@SONICAKE really? parallel paths is awesome !! I need to check more about it ! edit : I'm sorry but after checking the manual, setting up parallel paths is nowhere to be found.... maybe I'm missing something or is it for future updates ?
@@RadityoPramAdi Hi, we are so sorry for the wrong answer before, here is the modified replies: 1, Is the signal path in linear. 2, yes, it features gapless switching in preset mode.
The more I search for a new modeler I'm more interested in the Donner Arena 2000 the choices are nux-mg30, sonic cake,hot tone ampero 200 to me the Arena 2000 has better futures
Yes, you're right! The Matribox II Pro comes with dedicated software for both Mac and PC, making it super easy to manage presets and edit your sounds. You can dive into all the details without too much hassle - perfect for staying lazy! 😄
Thank you Sonicake!
It seems to be a well thought out unit.
Add 1 Independent editable mono line for the input, so one can make a bigger stereo sound, that would be really good. Like having two separate FX paths from the same input.
Highly considering a purchase however i am wondering. The usb c port can also be used as a mobile interface to connect and record to a cell phone or for live streaming correct?
Absolutely! The USB-C port works as a mobile interface, so you can easily connect, record to your phone, or even live stream! 🎸
Could this be used as a headphone amp? Like power the pedal plug in the guitar and listen through the headphones.
Hi, can this unit perform scenes using the ctrl button, as in can I assign multiple effects on/off to one footswitch? Thanks
We are sorry the Matribox II Pro does no support scenes at the moment.
wow!
Did someone try to put external effects in SEND / RETURN loop? I experienced a lot of hum noise (not depending by pedals) with same setup I always use with another modeler. I do not know if it is general issue or it affects only my unit....
Can you get these to zzounds so I can buy one?
Two thoughts.
1/ I hope the foot switches don't need a heavy stomp because I play in my stocking feet at home.
2/ I hope the global settings are saved with the patch because I play acoustic & electric guitar, and fiddle. Probably not!?
Help me please
In Stomp mode Can on/of mudule more than 1 module
Ex. Crtl 1 stomp for on drive and on delay together.
Crtl 2 stomp for on Reverb and drive same Crtl 1 but low gain more than Crtl 1
Hello. Just ordered one. Looper is not getting covered in any other video I watched so far. Basic question: can I change presets while looping for a different overdub sound?
Is there or will there be an option for a looper countdown (drum synced)?
thks in adv
The first question: yes, you can. After recording the original track, during playback, step on C+D again to step on the pegs, exit the switching tone, playback will not stop, after switching to the specified tone, step on C+D again to return to the loop can be superimposed using the switched tone, need to pay attention to if you use a different tone to record a different track, you should set the loopers to the back. (The maximum recording time is 45 seconds)
The second problem is yes. There is a “Drum Machine Sync” option in the looper interface. Turn on “Drum Machine Sync” in the looper interface, and start recording when the drum machine has finished playing at the beginning of the bar, and make small adjustments to the recorded phrases so that they are aligned with the drum machine. Note that you need to turn on the drum machine before starting the looper.
Thks for replying. I´ll be having mine somewhere next week, at the time only avail through amz de.
Next user manual revision make it clearer (looper details), will benefit all (incl yourself)
it would easier to edit with the knobs if you had a general option to additionally step up on turning (+10,-10) instead of only (+1,-1).
Otherwise most reviews I´ve watched there´s a few (not many) firmware fine tuning adjustment to cater for- ex effects small text lettering below their graphics in edit preset and/or stomp modes (not much screen space, I know, and the pc app does show them): Reviewers videos you´ve sent units to are commenting a few improvements.
Is there a gap while switching patches?
Where can i Buy it.for México Guadalajara???
1. Does it do split or parallel signal paths?
2. Does it have gapless switching with the preset mode?
Hi, we are so sorry for the wrong answer before, here is the modified replies:
1, it has split paths.
2, yes, it features gapless switching in preset mode.
@@SONICAKE really? parallel paths is awesome !! I need to check more about it !
edit : I'm sorry but after checking the manual, setting up parallel paths is nowhere to be found.... maybe I'm missing something or is it for future updates ?
@@RadityoPramAdi Hi, we are so sorry for the wrong answer before, here is the modified replies:
1, Is the signal path in linear.
2, yes, it features gapless switching in preset mode.
@@SONICAKE I see, thank you for clarification.
Great!
thx 🤘🎸
If need be can you turn off the amp or cab simulation and just plug directly into an amp and use it that way?
Craig
Pretty sure the amps and cabs can be disabled. There is the manual on sonicake's website to confirm.
Thank you for that, I will look into it.
what about otg mobile phone recording?
🔥🔥👏🏼👏🏼👏🏼
Hello! Just ordered mine. Can you tell me the dimensions please?
The dimensions are 373mm × 198.5mm × 37mm (14.69" × 7.81" × 1.46").
make it available in the Philippines
The more I search for a new modeler I'm more interested in the Donner Arena 2000 the choices are nux-mg30, sonic cake,hot tone ampero 200 to me the Arena 2000 has better futures
on your next product please add bluetooth ios and android control app.
Looks like a promising unit. It's like if Hotone and MOOER had a Baby. This has Software for MAC/PC correct? I'm lazy!!
Yes, you're right! The Matribox II Pro comes with dedicated software for both Mac and PC, making it super easy to manage presets and edit your sounds. You can dive into all the details without too much hassle - perfect for staying lazy! 😄
Please make stomp!!!!