Jenna, THANK YOU SO MUCH for doing this video. I have the same make and model stove (might look different once I open the top up) and my front left burner stopped heating. I got the part from GE like you did and am working up the courage to change it out. I'm a 74 year old woman who prefers to doing everything myself instead of overpaying a guy to do it. But I have never done anything like this. Oh heck...wait a minute...I'm just going to go get it done. I'M BACK!!! I did exactly like Jenna said...pulled each connection off the burned out unit and put it immediately on the new unit on at a time. Worked like a charm!!! I'm so proud of myself...and owe it all to Jenna!! THANKS AGAIN!!!
15 year old video still providing value to this day. I am working on this problem for my G.E. stovetop and this was by far the most helpful! Thank you!
Great job! I just installed a main top on a Whirlpool stove, slightly different, but saved me almost $400 in service call and labor from Ace Appliance Repair in Swanton Md! Took me 35 mins or so taking my time. Ace quoted me $100 over Repair Clinics parts price, plus labor estimate $150, also show up charge $99, total job Ace's price total was $650! Plus wait 3 weeks! Instead chose to order part from Repair Clinic for $267 and put in myself! Thanks for the vid and thumbs up to RepairClinic.
Thank you for putting this video together. Very well done. I figured it was a pretty simple replacement but it's nice to have something to verify that before digging in. Your "baby" should now be about 11 years old. I hope you are teaching them to be self-sufficient too!
Thank you! I need to change the same one. It's been a couple of months since my husband said he'd do it. Now I have the confidence to do it myself, you know, so that it gets done!!
Thank you so so so much for this video. Failed an inspection due to the largest and most used burner not working. I reviewed your video, found and installed the part myself. I'm not a prego, just a 46year old [lady] electric range repair virgin. Inspector will be back tomorrow and thanks to you, we will pass with flying color. Wishing you and your baby the best. Can't thank you enough. GIRL POWER - ALL DAY! :-)
This is the best video for a self help project..... Thanks for your help. I just got my parts from Amazon and installed it and it works like a charm....
Nice video. It is very helpful to have a second person (or device) to hold the stove top in the up position. Also, if using a generic or replacement part, I would advise making sure the connections (1A, 2A, 1B, 2B) are consistent with the original (not working) burner. The job is easy and only took us 15 minutes.
Thanks for your amazing video. Very useful. My stove just gone yesterday and your video help me save labor $. Excellent video and and wish you all the best for your upcoming/newborn baby.
I gotta admit I was very impressed with your Video, My Appliance person was going to charge me for a replacement Top $285 plus labor for a bad - I also had a 1 bad element
I'm so impressed. I thought this would be a big project that only a tech could do. You saved me money and it was pretty easy to fix. Thanks and good luck with a healthy baby.
Thanks. Just what I was looking for. Straight, to the point and and enjoyable all the way through. Another PITA project out of the way that's taken way too long to get around to fixing.
Smart Lady! What made it easier for me?Install new element first then I would swap out the wiring removing ONE WIRE at a time. With this method there is no way you can mix up the wiring. Stay Safe. Thanks for the video
“Yes I am 9 months pregnant, I’m do in a week, so hopefully this will put me into labor” 😂😆 ma’am you should be a comedian, I’m dead Lol! (PS thanks for the help with the stove!)
Awesome video! I just bought a new GE stove that had a burner break after a few uses. I'm going through the warranty obviously, but I was very curious how these glass tops come apart.
I do admire her will to fix her own appliances and save money but I think one thing to add to this video is that having the proper tools, or something close to proper tools, can save you a lot of grief and time. Her adjustable wrench to loosen a couple of 5mm hex/Phillips bolts/screws is a bit large by orders of magnitude and can damage a fastener and make it un-removable by common means. If you want to fix your own stuff, it's not rocker science for a willing and determined individual, tool-up just a little bit. You can buy a competent home fix-it tool set selection at your local Harbor Freight or Lowe's for 40 bucks (HF) or a little over twice that at Lowe's (better quality of course). Both have what you need to fix appliances like she is doing here and will make your repair easier.
Interesting. That kid must be 12 or 13 years old by now. Good job! You can use a piece of a piece of a 2 x 4 cut to a handy length (24") to prop up the stove top while you are replacing the burner. That way you don't need the camera person (hubby?) to hold it up. Good job!
Fantastic video, and thank you for being so thorough. BTW, congratulations on the baby. Since the video is a few years now, I take it your baby is now 3 or 4. :-) Congrats and thanks.
Good Video, mine had a cross member with two spring loaded captured screws. Marked tho old locations and transferred the marks to the new burner and up and running. Had to drop one side of the cross member. Old one burned through a spot in the small element. Be Careful when handling the new element as the clay insulation is fragile and will break.
Boy do you make me feel foolish. I've replaced parts on older coil element stoves. I tried to see if my good old GE Spectra top flipped up...It doesn't. 3 of my eyes burned out this year. The one that us working is arear one, and I am disabled. I USE A CHAIR IN THE KITCHEN. I have great difficulty reaching it. But I can certainly follow your wonderful example. THANK YOU SO VERY MUCH.
I appreciated for your hard work and very helpfull .one of mine is not working at all but I don't realy know what wrong with that .becauce it is looking good to me .I afaid the nob switch or maybe something with the wire . I do not have the electric tester . I went to the store to buy the burner it is cost $ 122.00 and no returnable . thanksss
After 12 years, you are still the best stove repair pregnant woman!👍🏼👍🏼👍🏼💪💪💪
Jenna, THANK YOU SO MUCH for doing this video. I have the same make and model stove (might look different once I open the top up) and my front left burner stopped heating. I got the part from GE like you did and am working up the courage to change it out. I'm a 74 year old woman who prefers to doing everything myself instead of overpaying a guy to do it. But I have never done anything like this. Oh heck...wait a minute...I'm just going to go get it done. I'M BACK!!! I did exactly like Jenna said...pulled each connection off the burned out unit and put it immediately on the new unit on at a time. Worked like a charm!!! I'm so proud of myself...and owe it all to Jenna!! THANKS AGAIN!!!
Great job!
15 year old video still providing value to this day. I am working on this problem for my G.E. stovetop and this was by far the most helpful! Thank you!
All while 9 months pregnant. WOW! Thanks for video
Great job! I just installed a main top on a Whirlpool stove, slightly different, but saved me almost $400 in service call and labor from Ace Appliance Repair in Swanton Md! Took me 35 mins or so taking my time. Ace quoted me $100 over Repair Clinics parts price, plus labor estimate $150, also show up charge $99, total job Ace's price total was $650! Plus wait 3 weeks! Instead chose to order part from Repair Clinic for $267 and put in myself! Thanks for the vid and thumbs up to RepairClinic.
Thank you for putting this video together. Very well done. I figured it was a pretty simple replacement but it's nice to have something to verify that before digging in. Your "baby" should now be about 11 years old. I hope you are teaching them to be self-sufficient too!
I was inspired by you to try and fix my 17 year old Kenmore stove. Along WITH my husband, we were successful. Thanks
Best video on changing a burner!
You are one tough lady, fix it with very basic tool, great job. Most guys will pull out their fancy power tools in order to do this.
My part is ordered. Sure hope mine is as easy as you make it look!!!!!
That was great. Congratulations on your new baby.
Good job sister God bless you 👏👏👏
Thank you! I need to change the same one. It's been a couple of months since my husband said he'd do it. Now I have the confidence to do it myself, you know, so that it gets done!!
Thank you for your vedio you made it look very easy to repair and save money
Thank you so so so much for this video. Failed an inspection due to the largest and most used burner not working. I reviewed your video, found and installed the part myself. I'm not a prego, just a 46year old [lady] electric range repair virgin. Inspector will be back tomorrow and thanks to you, we will pass with flying color. Wishing you and your baby the best. Can't thank you enough. GIRL POWER - ALL DAY! :-)
This is the best video for a self help project..... Thanks for your help. I just got my parts from Amazon and installed it and it works like a charm....
Thanks for the great video good luck with the birth of your new baby!
Great job, great video, and an excellent attitude!
Aww yeah!!!! Thank you so much!!! Shout out from Dallas, TX. You saved me some money. God bless.
Nice video. It is very helpful to have a second person (or device) to hold the stove top in the up position. Also, if using a generic or replacement part, I would advise making sure the connections (1A, 2A, 1B, 2B) are consistent with the original (not working) burner. The job is easy and only took us 15 minutes.
Yeah, you are the best pregnant appliance repair woman !
Wow! Good job! I bet that your child will be an electrical engineer!!
Thanks for your amazing video. Very useful. My stove just gone yesterday and your video help me save labor $. Excellent video and and wish you all the best for your upcoming/newborn baby.
I gotta admit I was very impressed with your Video, My Appliance person was going to charge me for a replacement Top $285 plus labor for a bad - I also had a 1 bad element
Good job, Jenna. Thanks for the lesson. Happy Holidays
You rock lady!!!!
Thank you to your video, I will fix mine, God bless you and your baby😁
I'm so impressed. I thought this would be a big project that only a tech could do. You saved me money and it was pretty easy to fix. Thanks and good luck with a healthy baby.
Outstanding!! Great instructions. Mine just went out on Thanksgiving Day😥
Thanks. Just what I was looking for. Straight, to the point and and enjoyable all the way through. Another PITA project out of the way that's taken way too long to get around to fixing.
Excellent video, thank you
Felicitaciones! me encanta ver a una mujer tan talentosa que no se vara!
Excellent demo, I hope you had a positive birthing experience.
Thank you for the clear instructions 👍
You lady are awesome !! I will go ahead and order a GE part. Thanks for such a great video.
Thank you Jenna for sharing this great video !
Smart and independent woman, thanks for sharing!
Thank you, I admired you courage to do this kind of job.
It was very helpful and very didactic.
God Bless you and the baby.
Thank you Jenna. Just fixed my burner. Works great. Saved $$$ not having to call for service.
Smart Lady! What made it easier for me?Install new element first then I would swap out the wiring removing ONE WIRE at a time. With this method there is no way you can mix up the wiring. Stay Safe. Thanks for the video
Thank you for showing me how easy that job is!!! You've saved me a bunch of money on repairs! (Actually, I was hoping to just buy a new stove, LOL.)
Wow... Thanks a lot for the video 🙌 I guess I can do it myself 😁 Stay safe and God bless you and your family 🙏💞
Thank you lady. Very nice video.
I found this very helpful! U rock 🎉🎉🎉🎉
Thanks for the tutorial. I hope your child enjoyed their 12th birthday 5 months ago. You will be forever pregnant on UA-cam.
Thank you your video help me to fix my oven
Ur awesome! I'm surprised there isn't a stand to hold up the stove top like a car hood. THANKS FOR UR HELP!
Exactly what I am looking for! Thank you so much
I enjoyed very much your video, I hope the everything is fine with you two, thank you for your video , helped me change by top burner,
Very helpful! Thanks for sharing this information. Obviously these stoves have this one burner flaw.
Awesome video 👍
Outstanding demonstration! Kudos!
Wonderful video thank you for taking the time to share.
Thank you very much for you video. I am confident enough to fix my stove now.
Awesome! Take picture of the wired before undoing, that helps us memory challenged people! :)
Wow a wife that fixes stuff while pregnant. Hold on to her brother!
Great video. Thanks for sharing
“Yes I am 9 months pregnant, I’m do in a week, so hopefully this will put me into labor” 😂😆 ma’am you should be a comedian, I’m dead Lol! (PS thanks for the help with the stove!)
Also helpful to take a picture of where it's mounted so you can center it the first time
Awesome video! I just bought a new GE stove that had a burner break after a few uses. I'm going through the warranty obviously, but I was very curious how these glass tops come apart.
Great Job.
Great video! thanks. My same burner went. you can see the point in the element where it burnt out (it's broken there).
I do admire her will to fix her own appliances and save money but I think one thing to add to this video is that having the proper tools, or something close to proper tools, can save you a lot of grief and time. Her adjustable wrench to loosen a couple of 5mm hex/Phillips bolts/screws is a bit large by orders of magnitude and can damage a fastener and make it un-removable by common means. If you want to fix your own stuff, it's not rocker science for a willing and determined individual, tool-up just a little bit. You can buy a competent home fix-it tool set selection at your local Harbor Freight or Lowe's for 40 bucks (HF) or a little over twice that at Lowe's (better quality of course). Both have what you need to fix appliances like she is doing here and will make your repair easier.
Just what i was thinking,get a set of nut drivers,2 ft of 2x4 wood to hold up the top.Good job on the stove.
Interesting. That kid must be 12 or 13 years old by now. Good job! You can use a piece of a piece of a 2 x 4 cut to a handy length (24") to prop up the stove top while you are replacing the burner. That way you don't need the camera person (hubby?) to hold it up. Good job!
Great!! thanks for the Video.
Very smart lady 🙏
Good demo. thanks
There are numbers where the holding brackets are to be placed. looking at the old burner you can see the two numbers where the brackets should go.
Great /good job Thank you for the video you make my life easies
Thank you for the tutorial - gosh, your little one is twelve now!
Great mom about to give birth doing a stove burner repair video more power to her God bless. she’s teaching her baby to be hands on early LOL
Fantastic video, and thank you for being so thorough. BTW, congratulations on the baby. Since the video is a few years now, I take it your baby is now 3 or 4. :-) Congrats and thanks.
You did a great job! Congrats you should be proud of yourself!
She is a keeper. Lucky man.
good video , good job. Thumbs up !!
This is very helpful! Thank you !!
Good Video, mine had a cross member with two spring loaded captured screws. Marked tho old locations and transferred the marks to the new burner and up and running. Had to drop one side of the cross member. Old one burned through a spot in the small element. Be Careful when handling the new element as the clay insulation is fragile and will break.
Boy do you make me feel foolish.
I've replaced parts on older coil element stoves.
I tried to see if my good old GE Spectra top flipped up...It doesn't.
3 of my eyes burned out this year.
The one that us working is arear one, and I am disabled. I USE A CHAIR IN THE KITCHEN. I have great difficulty reaching it.
But I can certainly follow your wonderful example.
THANK YOU SO VERY MUCH.
Such an inspiration!! Thank you!
Thank you. Easy to understand!
That was great. Thanks so much. Actually your range is very similar to mine, or maybe the same.
Love it!... using a crescent wrench to remove the hex screws...
I prefer using vise grips, or a pipe wrench in a pinch, but to each his or her own
Great Job !!! This Helps
this was amazing and so easy to do. thank you
I appreciate your efforts.thank soooo much.
You go gurl!!
Wow I'm very impressed holy cow
Good job 👍
Excellent !
THANKS
Thanks for sharing your video, I had to work on mine and at that same burner, what a coincidence. Any how it's working now thanks again.
Watching in 2020. Realized the baby's turned 12 years now.
Thanks for the video!
that help!! thank you!
you are great
Very helpful video
The circuit breaker you opened was for the A/C, NOT the Range.
Kudos great Job!
thanks for sharing & congratulations :)
Good video thanks.
Great video! Thanks.
I appreciated for your hard work and very helpfull .one of mine is not working at all
but I don't realy know what wrong with that .becauce it is looking good to me .I afaid the nob switch or maybe something with the wire . I do not have the electric tester . I went to the store to buy the burner it is cost $ 122.00 and no returnable . thanksss
Atta girl. Well done, thanks.