Funny enough im about to get into myself just bought the whole setup and will be trying it out this weekend. Save some on the constant gas buy , not to mention the consistancy that hpa offers
Yeah i use a "glock to m4" om my AAP1 Smg build it works awesome. i can use around 12 x 120 round before the air needs to refil. and i dont get the Greengas blowout/leakage. its good.
@@Ceekay702 Does the m4 mag tuck under your arm well? Or get any issues with that? I have trhe MP5 one and the shotgun shell one. i run mini mp5 mags on that as well.
this is awesome i was just checking this VFC M4 adapter on there site, and was thinking i wonder and hope it will fit and work, and now u show it its perfect.
@@6mmbadger i tried out TAPP airsoft, but never seen one or had one that worked at all... but saiga-12, mpx, vfc m4, stengun adapters from airtac worked with no hazzle, had 1 adapter that was faulty from arrival, but airtac just send me a new with no charge 10/10
Yes to answer your question! I use both the Airtac Version 1 adapter for MWS and their SBS version 2 adapter. Paired with the EPM1-S mags and a Balystik Regulator. They are pretty good quality overall but I've had a few issues with both. On the MWS adapter, it's flawless in semi and it really lobs the BB's very far with very consistent FPS! Unfortunately, in full auto it seems to skip every second or 3rd round, or shudders and cant seem to keep up with a consistent fire rate. Recently someone suggested it might be because of the poor refresh rate on the Balystik regulator and it might perform better on a wolverine storm cat 5 reg, which has a much faster refresh rate on the air piston. I also had to use a 3rd party valve knocker, as the 3d printed one they provided had a small piece shear off after a very short time and was a very rough print, which would be rubbing against the tunnel its sat in causing friction and slowing it dowm. On the SBS adapter, initially it needed a shim to ensure the mags would fit and feed consistently. Semi was ok but in full auto I keep getting an issue where the bb's stop feeding corectly and end up jamming between the airtac adapter and the magazines feed lips - which stops the SBS from firing any morw BB's once the jam occurs. If I put in the original SBS 90 round long mag, it fires all shots perfectly in full auto. Airtac do offer a life time warranty but they have not replied to either of my support requests, so im not too impressed. I love the idea of their adapters and maybe I've been super unlucky, but I think there are some quirks and maybe some QC issues with the Airtac Adapters.
Airtacuk’s design for apfg mpx is also pretty damn good. For mws however I’ve been using t8’s Hpa adaptor which works pretty well and is much cheaper to get, and it’s metal construction is less concerning to run, however it doesn’t look as good as airtac nor does it retain bb as well. Cgs also have this new multi-gas mag for mws that seems to have good potential in hpa conversion, tho probably need a few modifications and it also limited to real cap as well
I have adapter for my mws. Never shoot even once with green gas :D put airtac adapter and im good to go. Best thing ever. And i have small issue with my adapter and they just send me the new one no questions asked. Best support ever!
I use a SP systems version that is CNC aluminium for my Noveskes... just ordered a CO2 ---> HPA adaptor to use 88g C02 cartridges with a Balystik regulator.
Interested to use the airtac shot gun shell version of this but I read online that , it is limited to the fps being lower due to the size of the mag as it has a smaller gas valve if you use the shot gun shell version . Super convenient as you got no mag sticking out the bottom and a 30 rnd mag that basically weights next to nothing. ((:
Is the air releasing and the bolt moving but no bbs are coming out? Are the bbs feeding to the top of the feedlips in the mag? Which mag are you using in the adaptor? What mag did you take the gas router from?
@@6mmbadgerhi, yes the air releasing and the bolt moving but no bbs are coming out, iam using the same charger TPS like you, When I reload (my New MCX) when I shot only the first BB go out, and others dont
@@raidoksgames3510 I would email AirTac. They are great at responding and sorting any issues. It works fine with your gas mags? Sounds like it could be a feeding issue
Can't stand Airtac adapters myself. I've had nothing but issues with the several different adapters I've owned from them, cannot personally support or recommend them. Others may have different results but I had such poor results that I stick to solely gas magazines now.
@@6mmbadger I've have a Saiga one that works well but the VFC M4 one like this does not. Can I quickly ask what PSI did you have to run to get it kicking like the gbb mags? I could barely get it cycling unless I go 140-160 but yet it was still meh
@NonoCatNZ hi, love your channel. I have them for everything pretty much. I think I was running it at 120 psi. I can do a video testing it if you want? Is yours from AirTac or another company?
It is so frustrating that here are no GBBR rifles that use a HPA Bottle in the stock and allow us using AEG Magazines and HopUp parts :( I use a Polarstar UGS with 13ci 3000psi tank in the stock and can make 1000shots with my Kythera. I am sure this ammount of air would be enough to give me 300 GBBR shots including recoil.
@mysteryboxes Problem is, it will not work on any AR15 Platform, since the space is used for the recoil spring. But any AK Type would work. I use mine on an Arcturus AK74 AEG.
@mysteryboxes lol you gotta feel my anxiousness lol. put the mag in, put the mag in. hey what studio microphone you using. in my headset i hear your table creating very low frequency thuds when you are hitting it. maybe youre using those super sensitive vocal recording mics?
Have you used a Gas Blowback HPA adaptor before?
Funny enough im about to get into myself just bought the whole setup and will be trying it out this weekend. Save some on the constant gas buy , not to mention the consistancy that hpa offers
Yeah i use a "glock to m4" om my AAP1 Smg build it works awesome. i can use around 12 x 120 round before the air needs to refil. and i dont get the Greengas blowout/leakage. its good.
@@Ceekay702 Does the m4 mag tuck under your arm well? Or get any issues with that? I have trhe MP5 one and the shotgun shell one. i run mini mp5 mags on that as well.
I already have ghk m4 gbbr, but I just got TM mp7 gbb and airtac mp5 adapter … love it!
@@Zapijatko I have the TM one too!!! What psi do you run it at? Always a bit scared to run it to high and damage the backplate!
this is awesome i was just checking this VFC M4 adapter on there site, and was thinking i wonder and hope it will fit and work, and now u show it its perfect.
i Could help mate!!! Always let me know if there are any other questions I can answer!
Great replica, 🔥🔥🔥
Thanks mate!! I love this one!
Airtac adapters hands down the best adapters
That’s the general consensus I keep hearing from everyone
@@6mmbadger i tried out TAPP airsoft, but never seen one or had one that worked at all... but saiga-12, mpx, vfc m4, stengun adapters from airtac worked with no hazzle, had 1 adapter that was faulty from arrival, but airtac just send me a new with no charge 10/10
Yes to answer your question! I use both the Airtac Version 1 adapter for MWS and their SBS version 2 adapter. Paired with the EPM1-S mags and a Balystik Regulator.
They are pretty good quality overall but I've had a few issues with both.
On the MWS adapter, it's flawless in semi and it really lobs the BB's very far with very consistent FPS!
Unfortunately, in full auto it seems to skip every second or 3rd round, or shudders and cant seem to keep up with a consistent fire rate.
Recently someone suggested it might be because of the poor refresh rate on the Balystik regulator and it might perform better on a wolverine storm cat 5 reg, which has a much faster refresh rate on the air piston.
I also had to use a 3rd party valve knocker, as the 3d printed one they provided had a small piece shear off after a very short time and was a very rough print, which would be rubbing against the tunnel its sat in causing friction and slowing it dowm.
On the SBS adapter, initially it needed a shim to ensure the mags would fit and feed consistently. Semi was ok but in full auto I keep getting an issue where the bb's stop feeding corectly and end up jamming between the airtac adapter and the magazines feed lips - which stops the SBS from firing any morw BB's once the jam occurs.
If I put in the original SBS 90 round long mag, it fires all shots perfectly in full auto.
Airtac do offer a life time warranty but they have not replied to either of my support requests, so im not too impressed.
I love the idea of their adapters and maybe I've been super unlucky, but I think there are some quirks and maybe some QC issues with the Airtac Adapters.
This is such good info, thank you mate!!! I havent had any issues with mine so far, but that is great to know for the channel community!!
For the prices they charge for the adapters they should come complete
I know what you mean.
Airtacuk’s design for apfg mpx is also pretty damn good. For mws however I’ve been using t8’s Hpa adaptor which works pretty well and is much cheaper to get, and it’s metal construction is less concerning to run, however it doesn’t look as good as airtac nor does it retain bb as well. Cgs also have this new multi-gas mag for mws that seems to have good potential in hpa conversion, tho probably need a few modifications and it also limited to real cap as well
Love this info thank you mate. I love my MPX one I went through at the end.
I have adapter for my mws. Never shoot even once with green gas :D put airtac adapter and im good to go. Best thing ever. And i have small issue with my adapter and they just send me the new one no questions asked. Best support ever!
Yeah I have loved all my experiences with them. Love how light the adaptors are as well!
I use a SP systems version that is CNC aluminium for my Noveskes... just ordered a CO2 ---> HPA adaptor to use 88g C02 cartridges with a Balystik regulator.
Those sound and look so cool. My only reservation has been the 88g cartridges. Have you found a good place to buy them and not too expensive?
Interested to use the airtac shot gun shell version of this but I read online that , it is limited to the fps being lower due to the size of the mag as it has a smaller gas valve if you use the shot gun shell version . Super convenient as you got no mag sticking out the bottom and a 30 rnd mag that basically weights next to nothing. ((:
I have the shotgun shell versions for my AAP01 and Mk23. I really like them but nebver used one for an AR or full size replica.
I see you have a kinetic driver.
I didnt need one either, so i bought one 😅
Hahaha!! I love it so much!
Im try to find one for my vfc M4/hk416 and we tech M4
I think this would work on your VFC M4
Hi, when I put my Airtac adaptateur on my APFG MCX, the bbs dont shot
Is the air releasing and the bolt moving but no bbs are coming out? Are the bbs feeding to the top of the feedlips in the mag? Which mag are you using in the adaptor? What mag did you take the gas router from?
@@6mmbadgerhi, yes the air releasing and the bolt moving but no bbs are coming out, iam using the same charger TPS like you, When I reload (my New MCX) when I shot only the first BB go out, and others dont
@@6mmbadgermaybe need to put the original Gaz valve ? In my adaptateur airtac is only the original (plastic)
@@raidoksgames3510 I would email AirTac. They are great at responding and sorting any issues. It works fine with your gas mags? Sounds like it could be a feeding issue
@@6mmbadgeryes ! With gaz mags is working fine ! Thank you very much
Can't stand Airtac adapters myself. I've had nothing but issues with the several different adapters I've owned from them, cannot personally support or recommend them. Others may have different results but I had such poor results that I stick to solely gas magazines now.
I’m sorry mate that is so annoying. Always want to hear everyone’s experiences so thank you for sharing!
@@6mmbadger I've have a Saiga one that works well but the VFC M4 one like this does not. Can I quickly ask what PSI did you have to run to get it kicking like the gbb mags? I could barely get it cycling unless I go 140-160 but yet it was still meh
@NonoCatNZ hi, love your channel. I have them for everything pretty much. I think I was running it at 120 psi. I can do a video testing it if you want? Is yours from AirTac or another company?
It is so frustrating that here are no GBBR rifles that use a HPA Bottle in the stock and allow us using AEG Magazines and HopUp parts :(
I use a Polarstar UGS with 13ci 3000psi tank in the stock and can make 1000shots with my Kythera. I am sure this ammount of air would be enough to give me 300 GBBR shots including recoil.
Yeah that’s a good point mate,…. Maybe we should make one!! Can’t be that hard, have to integrate an adaptor.
@mysteryboxes Problem is, it will not work on any AR15 Platform, since the space is used for the recoil spring.
But any AK Type would work. I use mine on an Arcturus AK74 AEG.
could maybe work with an MCX? If you put a special stock and cut through the back. Space is going to be the issue though….
@mysteryboxes problem is, how to make the GBB part run without hoses to the mags ;)
took some 15 minutes to actually put the thing in the gun
Haha! Sorry I had to build it...
@mysteryboxes lol you gotta feel my anxiousness lol. put the mag in, put the mag in. hey what studio microphone you using. in my headset i hear your table creating very low frequency thuds when you are hitting it. maybe youre using those super sensitive vocal recording mics?
Can't justify the price. Especially when you need to sacrifice a mag...
Yeah… was thinkin that too
Yeah it’s definitely pricey.
Just looking and you can buy VFC mag gas nozzle for a couple of dollars. Hard to find though!!