Very very helpful! I am trying to buy a flatbed or lowboy trailer so that I can keep my 15 ft bumper pull permanently on it as well as a 16-ft jet ski trailer behind it. This video helped me figure out exactly how everything will be attached, loaded and managed.
If you used the tow loop on the Adjustable wheel tower. You would not need the axle strap to load the trailer. It will keep the wheel tower in the upright position as well.
@@rioboy1 this comment is over 2 years old. If you look at the tower there is a steel ring welded to it. That is where you are supposed to put the hook from the winch.
Thank you. I do driveaway for horizon and love it. Cdl b holding me back from multiple loads. I like the company but this might make me change companies because they require cdl a even to tow haul.
what about unhooking your truck off the trailer and connect it into te bumper pull trailer and reverse it into the gooseneck? Can it be done? *serious question*
@@craiglan5427 be careful now! i was not able to load the trailer by backing it up. 1. The trailer back side hit the ramps before it reach the tires. 2. The megaramps of a bigtex are not wide enough for the tires width on trailer being back. I wish someone would told me this.
Almost need the wheel jack hooked also, along with safyy rope. pull it straight. Not sure if i would stand inbetween the ramp and trailer toung while initially loading. Best to stand on the outside. Incase it shifted or poped out and down. Trailer tounges arnt bullet proof. Thats why they have safty chains.
@@LeslieDanielVideos darn I'm looking at a boat that's 27 ft it's sitting on a trailer in fla. And would like it put on a trailer and sent to SC. If you know anyone my redwood1957 at yahoo is my email. Thank you Happy Easter
Yea I’ve been looking into it and that’s the first company I came across. Do they allow you to pick up cars under their authority or is it one of the what they don’t know doesn’t hurt them type of situations?
Almost need the wheel jack hooked also, along with safyy rope. pull it straight. Not sure if i would stand inbetween the ramp and trailer toung while initially loading. Best to stand on the outside. Incase it shifted or poped out and down. Trailer tounges arnt bullet proof. Thats why they have safty chains.
Very very helpful! I am trying to buy a flatbed or lowboy trailer so that I can keep my 15 ft bumper pull permanently on it as well as a 16-ft jet ski trailer behind it. This video helped me figure out exactly how everything will be attached, loaded and managed.
Thank you so much , we are glad we could help
I had no idea how this works... great video
Thanks so so much!
Professional Quality Video 👍
Ricky Blackshear thank you rick, im always trying to improve the quality of my videos
Nice video, are u looking for any drivers, I'm an OTR Hotspot and I would like to try the RV Transportation. Please let me know thanks
The company I used to work with is always looking for drivers is call horizon transport out of goshen indiana
It would have been a benefit to have also recorded how to unload the cargo from the trailer.
(play the video in reverse)
Thank you for letting me know!
Thanks for responding!
how do you load a 2nd trailer on the flat deck?
Are there any limitations with height on this? Most states have a clearance limit of 13’6.”
were do you get one of those touge things.
thanks! I've never seen that setup
You’re welcome👍🏼
If you used the tow loop on the Adjustable wheel tower. You would not need the axle strap to load the trailer. It will keep the wheel tower in the upright position as well.
U have an example
@@rioboy1 this comment is over 2 years old. If you look at the tower there is a steel ring welded to it. That is where you are supposed to put the hook from the winch.
Appreciate it
Thank you. I do driveaway for horizon and love it. Cdl b holding me back from multiple loads. I like the company but this might make me change companies because they require cdl a even to tow haul.
You still at it Frank? I used to work for Starfleet back up to when fuel was $4.54 a gallon!! Fun job.
Yes it is!
Its a great company!
Did you customize this trailer, or can one buy it equipted? If so who from?
They are custom-made trailers from shipshe trailer in shipshewana Indiana
Very helpful. Thank you
You’re weldome!!!
Great presentation of the loading a camper process.
Background music was too loud in the mix, however.
Thank you for the comment and support!
what about unhooking your truck off the trailer and connect it into te bumper pull trailer and reverse it into the gooseneck? Can it be done? *serious question*
I am doing this exact thing in 2 weeks. will let you know.
@@craiglan5427 be careful now! i was not able to load the trailer by backing it up.
1. The trailer back side hit the ramps before it reach the tires.
2. The megaramps of a bigtex are not wide enough for the tires width on trailer being back.
I wish someone would told me this.
Those vents are designed to head into the wind not 70 mph backwards.
One question. How do you unload it?
Thank you for the support! I have a video were i show how to unload it!
Tuve el privilegio de hacer un viaje con Dani
Muchas gracias amigo!
Almost need the wheel jack hooked also, along with safyy rope. pull it straight. Not sure if i would stand inbetween the ramp and trailer toung while initially loading. Best to stand on the outside. Incase it shifted or poped out and down. Trailer tounges arnt bullet proof. Thats why they have safty chains.
Bro sabes quien haga un trabajo en el remolque como ese
Hey Daniel. Do you haul RVs?
I used to. But i left the business about 5 years ago!
why not use the steel eye on the balltower....why a strap?
I use the frame of the Rv but the transport company doesnt want us to scrach the paint , thats why I used the strap for the video
I need to transport couple trailers from TN to CA, do you serve that area? If so send me contact info
Do you do this professionally?
I used to , now I do professional video work in Miami Fl
@@LeslieDanielVideos darn I'm looking at a boat that's 27 ft it's sitting on a trailer in fla. And would like it put on a trailer and sent to SC. If you know anyone my redwood1957 at yahoo is my email.
Thank you Happy Easter
That center rail is custom?
A company makes the trail with the rail
What's it called?@@LeslieDanielVideos
You know that big loop on the adjustable wheel is for the winch right?
watch the whole video and you will see why I dont use it for the winch
Why do they not tow these to destination?
Because they can pick up more than one for a better rate per mile
If you don’t mind me asking. Do you work for a company or own your own?
99 expedition I work under Horizon transport authority you can learn more on horizontransport.com
Yea I’ve been looking into it and that’s the first company I came across. Do they allow you to pick up cars under their authority or is it one of the what they don’t know doesn’t hurt them type of situations?
99 expedition yes they allow you pick cars under their authority, they just charge you 20% Fee
Daniel Isaac that’s good to know. Thanks for the information.
What kind of trailer is that??
Where do i buy a ball tower
Ace hardware in middlebury Indiana
If I have trailer 50ft I can buy set per trailer
Yes it does but you have the be careful because of the height!
Where's the fatbed trailer ?
Saludos a todos
Saludos!
Let some air out of the camper trailer tires.
That's not a very big load for that trailer? LOL
Thats hitch wheel looks sketchy as fuck.
Not at all! It’s great!
Almost need the wheel jack hooked also, along with safyy rope. pull it straight. Not sure if i would stand inbetween the ramp and trailer toung while initially loading. Best to stand on the outside. Incase it shifted or poped out and down. Trailer tounges arnt bullet proof. Thats why they have safty chains.