Ensure trim of gaz is at neutral on controller. If this not solve I think maybe something creating a parasite contact on the main board. Try to send some aire pressure to try to clean it as not easily accessible
I Have not understood what is 'hoop' do you mean the black stuff which covers battery? If the shape of nose is modified due to crash you can try to give it shapes by plunging carefully inside hot water. To try to reshape. And thee you can also try to use electrical tape which is quite robust and can cover some gaps
I have same plane and I note that while the axis of the propeller sjaft is in live with the axis of the plane, the front foam edge of the plane is at an angle similar to yours ... not parallel with the base of the propeller's spinner. HOWEVER, my plane's metal shaft extends the spinnet's base about an 1/8th inch from the foam. This suggests that the crash dislodged the motor mount. You may be able to push the motor's plate forward and hold it in place with some clear silicon cauking (hot glue might be too hot for this type of foam). Good luck.
Hello Bob, sorry for delay to answer, I do not have technical spec of propeller, but if you need to buy it you can find it on Aliexpress with keywords: "A800 Propeller Folding Blades For Wltoys Xk A800 Rc Aircraft Fixed Wing Glider Upgrade Spare Parts"
Thanks, good video
On my side motor starts running when I plug the battery. It had a small crash, before was functioning OK. What could be the reason?
Ensure trim of gaz is at neutral on controller. If this not solve I think maybe something creating a parasite contact on the main board. Try to send some aire pressure to try to clean it as not easily accessible
Is there any way to fix the hoop mine is also misaligned
I Have not understood what is 'hoop' do you mean the black stuff which covers battery?
If the shape of nose is modified due to crash you can try to give it shapes by plunging carefully inside hot water. To try to reshape. And thee you can also try to use electrical tape which is quite robust and can cover some gaps
I Need to change the reciver plate. But how can I take out the plate…?
Hello Niklaus , I have no experience on changing the main receiver board
I have same plane and I note that while the axis of the propeller sjaft is in live with the axis of the plane, the front foam edge of the plane is at an angle similar to yours ... not parallel with the base of the propeller's spinner. HOWEVER, my plane's metal shaft extends the spinnet's base about an 1/8th inch from the foam. This suggests that the crash dislodged the motor mount. You may be able to push the motor's plate forward and hold it in place with some clear silicon cauking (hot glue might be too hot for this type of foam).
Good luck.
What size propeller is on this plane?
Hello Bob, sorry for delay to answer, I do not have technical spec of propeller, but if you need to buy it you can find it on Aliexpress with keywords: "A800 Propeller Folding Blades For Wltoys Xk A800 Rc Aircraft Fixed Wing Glider Upgrade Spare Parts"
@@tbremard thank you