How to make Drone at Home with Apm2.8 | Quadcopter | Indian LifeHacker
Вставка
- Опубліковано 10 вер 2024
- How To Make Drone At Home (Quadcopter) Easy
Hello Guys,
Here you will learn how to make a drone at home at the very low Price. This is very easy with apm2.8 Flight controller to make a drone that can fly without manually edit Pid value like KK2.1.5.
Components Used:
Apm2.8 drone Combo: www.flyrobo.in...
Suggested battery and charger:
Limbos 11.1V 3S Li-ion Battery (approx. 15-20 minutes flight time) : www.flyrobo.in...
iMAX B6-AC : www.flyrobo.in...
Low quality and low price charger: www.flyrobo.in...
How to make a drone with KK2.1.5: • How to make a Cheapest...
KK2.1.5 drone combo: www.flyrobo.in...
(Additional) Camera gimbal: www.flyrobo.in...
Mission planner software: ardupilot.org/p...
This drone / quadcopter will 100% fly if you will follow my steps and you will get even better performance if you will use more functions which i have suggested.
Music by: / ikson
Hello Dosto,
I hope is video ko dekhkar ap asani se APM 2.8 ke sath drone bana payenge.
Components Used:
Apm2.8 drone Combo: www.flyrobo.in/quadcopter-drone-combo-with-apm-2.8-kit-for-beginner-motor-esc-propeller-flight-controller-frame-tx-rx-power-module-belt-multirotor?tracking=5b853f18ae9a2
Battery:
2200Mah: www.flyrobo.in/zop-power-lipo-battery-11.1v-2200mah-3s-30c?tracking=5b853f18ae9a2
5400mah: www.flyrobo.in/zop-power-lipo-battery-11.1v-5400mah-3s-25c-t-plug?tracking=5b853f18ae9a2
Charger: www.flyrobo.in/imax-b3-lipo-balance-charger-for-2-3-cell-lipo-battery?tracking=5b853f18ae9a2
Please sir can you make a permanent video of esc calibration to all kind of flight controllers like apm, kk 2.1.5 and cc3d flight controller because this is a very important part for making a drone and you tell us that's lots of videos are making on esc calibration on UA-cam but either they are not justify clearly or neither they don't show us to full pledge video that's why I am telling and sorry to say my English is not so much good but I hope you understand what I'm saying to you
Nice video bro
Make review on fsi6s screen touch transmitter 10 channel
Radiolink at10 ki left wali throttle stick ki auto centring kaise kare......please....
sir maine sub kuch same kiya hai but i dont know what is the problem so i talked to an expert but he said to do some coding so what we should do
Sir please insert a gimbal with CAMERA.and also insert GPS
Tell me also i have to insert gps
Abe 10000 hajar me chahiye bhi wo bhi sare features
You are a Genius bro I really like all your videos
Bro pls tell how to connect telemetry, GPS, and fpv camera
He has made one video on that
Bhai aap ne bahut hi detail mei bataya hai please aise aur videos banaya karo
Sir please make Agriculture Drone like Dji MG 1 s
It will help to many people because we Indian can't afford MG1 s Agri drone
My drone is perfectly flying.
Thank u a lot sir
Vai Mr Indian Lifehacker Jo bataya he besehi kar rahe ho Kya?
Please help me als
I need Help will you Help me
Flyrobo Pr
Cash on delivery hai k nahi plz ans
Help aall
He to
COD but ak executive apko call karga verification ke liya
Sir please tell how to install gps and telemetry too...pls
he has made a video on that too bro
Hello.Which Mission Planner version do you use in the clip ?
I also made a drone because of you
Thank you sir 😊
How much range up or travel
Does this combo contains battery and charger
And Bhai gimble and gps pn sidkhvad ne yrr install karta please 🙏🙏🙏
Please answer this question that can we altitude hold a drone using kk2.1.5 controller
No
do we have to program the remote too please tell
I have a doubt in the part where you cut power module for soldering. Can we cut it from any of the side or is there a particular side to cut? urgent
There is a particular side, when you order power module and battery both then you know which side to cut
Apm k sath flysky ct6b ko use karke or use dron me do sarvo chala skte hai kya
Hi bro, I have made apm quad 2 months before and last two weeks ago while flying drone was crashed, and now it is arming and it is not flying, and I tried so many times to repair but still there problem with my quad, what to do now bro plz help.
When I am Arming the drone Mission Planner is saying need 3D fix
tell me about that
I have followed steps as you Showed
please reply fast
Same here
In short... need 3D fix showed when arming if you have enabled any feature of apm which requires gps location lock like geo fence or RTL etc..
How to disable this feature , I got the Dr problem
@@kunal_tripathy how to disable this feature??
Ka hum power Module नही लगाये तो चलेगा
Sir in the APM 2.8 quadcopter I have used the same product but when I flew it leaned to one side and crashed breaking my two props please help me sir
Same problem here,if you have solved ur problem please help me
You have to calibrate it before first flight
Very nice
Me aapka bohot bda fan hu me bhi. Aapse inspire hokee drone bnata hu love u very much
Pls make video on smart home... Pls...
vai mene apka fan ho geya i love you vai
Bangladesh se
how to stable....my Drone don't flying
unable to arm drone...... getting a prearm error of need 3d fix and alt disparity.......anyone with solution pls reply
Bro go to open ground and let the gps to connect to setelite and set to stabilise mode and try to arm it, it will arm
bahot dino baad darshan mile hain. thankyou
Can we make hexacopter with apm 2.8
Yes. You can.! But it will be not most stable. You can use pixhawk with out any tension. 👍
It can make a hexacopter, but APM isnt too upgraded to handle 6 motors, I mean it won't be that accurate which pixhawk can offer.
Sir, please tell me which version number mission software you used for calibration ...
Video bahat acchi banateho
Please giveaway the kit to make this cause many people dont have that much money to buy it.
Sir subse pehle to ye kehna chahata hu ki aapki video se mujhe drone banane ka motivation mila👌👌👌
Par jab banane baitha or bana bhi liya par baad m pata chala😮😮 ki bana to koi bhi le par udana badi bt h
Sir m 2 months se try karra hu par abhi bhi ni uda ni paya sir mera drone keval taraf se uth raha h doosri taraf se ni ud p raha h please 🙏🙏🙏 help kijiye
what is the size of the allen key to tighten the frame and motors?
Did you had any issue with GPS drift with APM 2.8?
Its ublox m8n gps. Would it be the power issue?
brother, how much weight it can lift??? aur is drone ka actual weight kitna hai please share. And you are awesome always make the perfect drones, i would love to say you are drone champ!!!!
Sir ham drone ka extra robotic arm ko remote par kaise add karna
thank you sir for making this video .
Hello sir,
Can u please make a video on apm 2.8 with gps and telemetry
Bro racing drone with camera ka video bana do na please cuz camera hoga aur racing drone hoga to cinematic footage acchi aayegi normal drone se
Please answer this question "can you fly drone in India without permit as you need UIN To fly macro drones?
I also have same doubt , how to get uin for diy drones
Thanks bro you are the best youtuber I succeed the drone is flying
I use APM2.5 with v3.2.1 firmware for quad copter. In radio calibration, the 3 point switch is working but it is not working in flight mode. when i change to plane everything works well.
Is this firmware problem?
Hum bhot jayada wait kar rahe the apke video ka thanks bro for making this video for us.
Compass calibration is not working for my APM 2.8 and hexacopter, can please help me what to do
Please make a video how to insert camera in this drone
Bro pla replay me after seeing this comment. Even i to build one drone using apm 2.8 flyght controller and iam using fs i6 transmitter and i6b reciver when i tryed to change its mode i lost control and it went some were near my surroundings aprox 1/2 km and crash landed over a building. Iam not getting good control over it what to do in that case should we remove j2 jumper from 1 st place and replace in 3rd pin. Plz clarify regarding this issue. Its my humble request to you.
HI bhaiya Today when I was calibrating my non gps module drone ( apm 2.8 ) and then after calibration so it is showing that pre ar 3d fix so how can we fix it please help
Assalamu alaikum vai,
can you help me please ??
I am using Apm2.8. my problem is when I rool posative by hand monitor shwing nagative diraction!
I finding result and tired..... no result found youtube and other site...
please try to say what can I do vai.
How to get a drone lisence
It is inleagal to fly drone in India
????????
I am making a drone for exhibition and so I have to fly it for a long time .. Can I use a Long wire connected with 12 V 60amp DC power supply?? To the pdb of the drone
No the voltage will fluctuate
@@sushmasingh4975 why will it fluctuate??
Bhai nice drone I like your video
Can i use !
3s 40A esc of sky walker with 50c or with 80c lipo battery ?
Please 🙏 help me .
Mene bhi aapka hi ek hexacopter banane ka vedio dekha he or banaya he must fly karta he sirf ek problem he ekf warning aati he
Nice video
plz add camera and gimbal to this, plz this will help us a lot.
Thank You! From Frisco, TX
I have lots of doubts
(1) Sir, agar power module use Kiya Jaye to E.S.C ke wire ko nikal na parta he kya.
(2) Me fs i6 transmitter use kar raha hu, flight moods ko set kar ne ke leye chennel 5 and 6 ko mix karna parta he kya,
(3) ek apm 2.8 drone me only 5 chennel se sal sakta he kya?
(4) M7N GPS ko 2 wire Bale cable ko kaha lagaye 12c ya gps ke nise Bale port me ?
Plz sir, answer my questions . I kindly request u. Plz sir ek video bonao with all of your viewers doubt . Plz sir ......
Nice video bhai
Bro plz tell me how can i Programe my remote model no. Fsct6b
Put bind plug in the receiver BAT pin. Power on the receiver. The led start blink fast. Now press and hold the bind button of the transmitter and power on. Now the led in receiver glow solid. Turn off everything and remove the bind plug in the receiver. Now power up asusual. To change the program settings install the software given in small cd disk on computer. After installation connect ur transmitter using the cable given. Now select the COM port. Now u start to see the green bars move along with ur stick movements.
Bina power module ke battery to direct distribution board main laga shakte hai.
i have seen your all videos sir and u explained very good thanks for this and i have maded this drone ..
Bro i've flysky fs i6..do i need to reverse the 2nd and 4th channel?
Hello bhai I'm Big fan my name is Sahil Malek from Gujarat Anand 😍😍😍
Hi bro, please help me. Iam not able set RTH feature in Mission planner. It shows blank ( niether Disable or enable)
Kya ham bina power module ke apm 2.8 ko use kr skte h ?
Sir mere pas flaysky i6s transmeetr hai muje useme seting karni nhi aa rhi hai ap kuch help kar sakte ho kya
I would like to make a Drone with Camera (geotag), kindly advise. Thank you
Please help me my drone is responding slow and increase speed if I lower the throttle till I restart it . I was just 1 feet away from drone
Bro 1) add fpv gimbal camera in it and telemetry gps setup all
2) tell total flight time I'll use 3s 5200mah or 2200mah
3)& tell told with all price
4)can we controller drone without radio transmitter receiver. only with telemetry can be controlled.
4) I want to fly it around 30 to 40min plz guide me.
Nice video bro!
Tye APM 2.8 has internal compass right. Then why are people using ublox gps modules?
Also if I want gps module, is ublox 6M supported on APM 2.8?
Finally, there are many people building without Power module. Please clarify
Which battery gives best flight time for a quadcopter brother?
maine ne sub kuch kiya but arm nhi horra plzzzz help
Thank u so much,i too bought the drone and done it successfully
Sir will you please help me...
7295888992 please sir ....I'll pay you for this
U can follow the steps which are told in the video
mission planner says that no board ID found , when i try to install from install frimware lagacy then it is asking that is it a linux board, i am not able to install frimware at all and also can i build the entire drone only with telemetry without rc remote .
Hi, how much weight or payload can it lift plz tell..!
Bhai, Ek nano drone banane ka video banao...............................😋😋😋😋😋😋😋😋😂😂😂😂😂😂😁😁😁
Thnq bhai for this tutorial video.👍👍
Bro pls help me to calibrate the compass it's not working and not showing a white dot and the board and it's just 1 compass 99 error
मुझे पांच किलो तक वजन उठाने वाला ड्रोन चाहिए है
प्लीज बताएं कौनसा ड्रोन ठीक रहेगा
Sir maine aapka video dekhke ye kit order Kiya but APM2.8 me Accel Calibration nahi ho pa raha hai. Please help
Bro lots of love from Bangladesh....
Plz fit a GPS in it and post another video.
Love ur videos.
Nice tutorial bro thanks . But my drone is responding very slow and it drifts to one side . But my main problem is it's very slow response. Please help
Hi , in mission planner, i am not able to do accelerometer calibration, after tilting left, calibration fails. any solution with anyone?
I have make a drone with apm 2 .8 , but the drone doesn't fly . Please help me .
Sir .. hardware part assemble karne ke baad . ...
Appne frameware install nehi kiya .. uska kya jaruri nehi hai APM 2.8 mein ?
Plz 10000 ke under racing drone banao with banggood parts.
Bhai kya hum ise kk 2.1.5 ki trha bina laptop ya pc k setup kr skte....???
there was no wizard option in the initial setup. what shoud i do please i do . i does'nt have time. please reply bro. please.........
How to make a wire less charger?
Moin
Sir please explain about the JP1 connector. 🙏🏻🙏🏻
I want to buy this drone kit from fly robo but I have one question that is if there's any problem with any part of the drone kit then can I return it or exchange with new kit?
can i use this dron 1400kv bldc motor & 10 inches propaler. Please sagas me.
Please please please please please please please please please please please add camera in this drone you are my favorite channel
big fan of you
Bhai action camera, gps stabilizer lagao iss drone mai plzz Bhai....aur uski video jaldise upload kro..
Bhai mein sare logoka sare comments read kia
Mujhe to pata nahi log sach bol raha hai jhut
Par mujhe apke video ka upar bilkul bharosa hai
Ap thoda esc calibration , battery ke upaar transmitter and receiver or binding ke uppar agli video me garrur batna
Kynki apke video par mujhe bahoot bharosa hai
Apka bada FAN
Anukalp
Bhai pre arm rc not calibrated!!! How to solve the problem. Please help.
Can we install brushless motor with esc to our toy drone