1. The selvage, or the finished edge of the fabric is smoother on the right side. 2.Loose thread ends can be found on the wrong side of the fabric. 3.Fabrics are folded right side in. 4.Prints are clearer and brighter on the right side.
Determining the Right and the Wrong side of the Fabric 1.The selvage, or the finished egde of the fabric is smoother on the right side. 2.Loose thread ends can be found on the wrong side of the fabric. 3.Fabrics are folded right side in. 4.Prints are clearer and brighter on the right side. -Rivera, Elrose R. 10 Hill
1.The salvage,or the finished edge of the fabric is smoother on the right side. 2.Loose thread ends Cam be found on the wrong side of the fabric. 3.Fabrics are folded right side in. 4.Prints are clearer and brighter on the right side.
1. The selvage, or the finished edge of the fabric is smoother on the right side. 2.Loose thread ends can be found on the wrong side of the fabric. 3. Fabrics are folded right side in. 4.Prints are clearer and brighter on the right side.
HOOK AND EYE - is a fastening device consisting of a small metal hook that catches onto a loop or bar, commonly used to secure garments at points where a zipper or button might not be suitable.
Hook and Eye are fastening device consisting of a small metal hook that catches into a loop or bar, commonly used to secure garments at points where a zipper or button might not be suitable
Hook and Eye is a fastening device consisting of a small metal hook that catches onto a loop or bar,commonly used to secure garments at points where a zipper or button might not be suitable.
Hook & Eye is a fastening device consisting of a small metal hook that catches onto a loop or bar, commonly used to secure garments at points where a zipper or button might not be suitable.
Nylon tape fastener-is compesed of two tape strips, one with a looped nap surface and the other with a hooked nap. When pressed together, surface grips and remains locked until pulled apart
Nylon Tape fastener is composed of two tape strips,one with a looped nap surface and the other with a hooked nap.When pressed together,surface grips and remains locked until pulled apart.
Nylon Tape fastener is composed of two tape strips,one with a looped nap surface and the other with a hooked nap. When pressed together, surface grips and remains locked until pulled apart.
1. Seam lines along curves and corners 2. Position of pockets 3. Stitch lines 4. Center lines for the front and back opening. facings and interfacings 5. Darts 6. Location of buttons and button holes 7. Points where stitching lines should stop 8. Fold lines 9. Any other special markings used to construct the garment
1.Seam lines along curves and corners 2.Position of pockets 3.Stitch lines 4.Center lines for the front and back opening. facings and interfacings 5.Darts 6.Location of buttons and button holes 7.Points where stitching lines should stop 8.Fold lines 9.Any other special markings used to construct the garment.
1. Seam lines along curves and corners 2. Position of pockets 3. Stitch lines 4. Center lines for the front and back opening. facings and interfacings 5. Darts 6. Location of buttons and button holes 7. Points where stitching lines should stop 8. Fold lines 9. Any other special markings used to construct the garment
1.Fold the cloth neatly and soak it in a basin of water overnight. 2.Hang the cloth and let it dry. 3.If the cloth is not smooth when it dries,pressing is necessary. 4.If the cloth gets out of shape,straighten it by stretching it diagonally.Stretch and pull gently but firmly until the edge and selvages are even when the material is folded in half lengthwise.
1.Fold the cloth neatly and soak it in a basin of water overnight. 2.Hang the cloth and let it dry. 3.If the cloth is not smooth when it dries, pressing is necessary. 4.If the cloth gets out of shape, straighten it by stretching it diagonally. Stretch and pull gently but firmly until the edge and seluages are even when the material is folded in half lengthwise.
This are the 4 methods of transferring pattern marking 1. By using Tailor's tacks 2. By using tracing paper and wheel 3. By using marker's 4. By trace tacking
1.Details should be marked on the wrong side of the fabric where most construction lines are needed. 2.If you use a tracing wheelchair and dressmaker’s carbon paper,mount these on a piece of heavy cardboard to protect tabla surfaces. 3.Use white tracing paper whenever possible because it is safe and easy to remove. 4.Use a ruler to make straight lines with the tracing wheel.Run the tracing wheel along the edge of the ruler with a firm and steady motion to avoid double lines,which can be confusing.
1.place the fabric and pattern flat on the table. Avoid moving or lifting the fabric while cutting. 2.walk around the tables as you cut instead of pulling the fabric toward you because the fabric may slip or stretch out of shape 3.use sharp shears for cutting, making long strokes along straight edges. Cut the edge straight since it serves as your guide in sewing. 4.Cut the fabric starting from the widest to the narrowest part of the pattern. Begin cutting at an edge which us easy to reach. 5.cut with smooth, even strokes 6.keep the cutting edge of the top blade of the shears directly above the lower blade. Do not left the blades slant toward the table. 7.cut similar pattern at the same time by cutting them out from layers of fabric. 8.close the points of the shears right up to the notch. Close the points at the exact stopping place. Cut outward from the pattern to the exact tip of the notch. Cut inward to complete the notch at the cutting line. 9.when cutting curves, make your strokes shorter. Keep the hand close to the cutting line to have smooth curved line. 10.set aside cut fabric pieces to avoid cutting them accidentally as you work on other parts of the fabric. 11.after cutting, do not remove the pins and patterns because you will need them in marking your fabric 12.collect and tie all scarps of cloth together for future use. You may be able to use these for your recycling project. Muceros Maricor 10-hill
ENUMERATE THE 4 WAYS IN DETERMINING THE RIGHT AND WRONG SIDE OF THE FABRIC
1. The selvage, or the finished edge of the fabric is smoother on the right side.
2.Loose thread ends can be found on the wrong side of the fabric.
3.Fabrics are folded right side in.
4.Prints are clearer and brighter on the right side.
Determining the Right and the Wrong side of the Fabric
1.The selvage, or the finished egde of the fabric is smoother on the right side.
2.Loose thread ends can be found on the wrong side of the fabric.
3.Fabrics are folded right side in.
4.Prints are clearer and brighter on the right side.
-Rivera, Elrose R.
10 Hill
1.The salvage,or the finished edge of the fabric is smoother on the right side.
2.Loose thread ends Cam be found on the wrong side of the fabric.
3.Fabrics are folded right side in.
4.Prints are clearer and brighter on the right side.
1. The selvage, or the finished edge of the fabric is smoother on the right side.
2.Loose thread ends can be found on the wrong side of the fabric.
3. Fabrics are folded right side in.
4.Prints are clearer and brighter on the right side.
DEFINE HOOK AND EYE
HOOK AND EYE - is a fastening device consisting of a small metal hook that catches onto a loop or bar, commonly used to secure garments at points where a zipper or button might not be suitable.
Hook and Eye are fastening device consisting of a small metal hook that catches into a loop or bar, commonly used to secure garments at points where a zipper or button might not be suitable
Hook and Eye is a fastening device consisting of a small metal hook that catches onto a loop or bar,commonly used to secure garments at points where a zipper or button might not be suitable.
Hook & Eye is a fastening device consisting of a small metal hook that catches onto a loop or bar, commonly used to secure garments at points where a zipper or button might not be suitable.
DEFINE SNAPS
SNAPS - are fastener with two parts, the socket and the ball with limited holding power.
Snaps are fastener with two parts,the socket and the ball with limited holding power.
Snaps is a fastener with 2 parts the socket & the ball with limited holding power
DEFINE NYLON TAPE
Nylon tape fastener-is compesed of two tape strips, one with a looped nap surface and the other with a hooked nap. When pressed together, surface grips and remains locked until pulled apart
Cavite Christian 10- jovellanos
Nylon Tape fastener is composed of two tape strips,one with a looped nap surface and the other with a hooked nap.When pressed together,surface grips and remains locked until pulled apart.
Nylon Tape fastener is composed of two tape strips,one with a looped nap surface and the other with a hooked nap. When pressed together, surface grips and remains locked until pulled apart.
ENUMERTAE THE 4 KINDS OF FABRIC FOLDS
1.Lengthwise centerfold
2.Crosswise centerfold
3.Off -center lengthwise fold
4.Off-center crosswise fold
JHON ARROL GANIT
10-Jovellanos
-Lengthwise Centerfold
-Crosswise centerfold
-Off-center lengthwise fold
-Off-center crosswise fold
1:47-1:51
Rhayven Medrano
10-Jovellanos
1.Lengthwise Centerfold
2.Crosswise Centerfold
3.Off-Center Lengthwise Fold
4.Off-Center Crosswise Fold
Lengthwise centerfold
Crosswise centerfold
Off-center lengthwise fold
Off-center crosswise fold
ENUMERATE THE 9 GUIDELINES IN TRANSFERRING MARKS ONTO THE FABRIC
1. Seam lines along curves and corners
2. Position of pockets
3. Stitch lines
4. Center lines for the front and back opening. facings and interfacings
5. Darts
6. Location of buttons and button holes
7. Points where stitching lines should stop
8. Fold lines
9. Any other special markings used to construct the garment
Johannah Marie B. Mariano
10-freer
1.Seam lines along curves and corners
2.Position of pockets
3.Stitch lines
4.Center lines for the front and back opening. facings and interfacings
5.Darts
6.Location of buttons and button holes
7.Points where stitching lines should stop
8.Fold lines
9.Any other special markings used to construct the garment.
1. Seam lines along curves and corners
2. Position of pockets
3. Stitch lines
4. Center lines for the front and back opening. facings and interfacings
5. Darts
6. Location of buttons and button holes
7. Points where stitching lines should stop
8. Fold lines
9. Any other special markings used to construct the garment
ENUMERATE THE 3 WAYS IN PREPARING THE FABRIC
1.Pre-shrinking
2.Straightening
3.Ironing
10-hill masapol
Lay out and mark pattern on materi
@@JaizsaMaeCNora-j3n saan po to?
1.Pre-shrinking
2.Straighgening
3.Ironing
DEFINE BUTTONS
Buttons- are round fasteners used to secure two piece of fabric.
Jhon Arrol Ganit
10-Jovellanos
Buttons are round fasteners sewn onto garments,used to secure two pieces of fabric together by passing through a corresponding buttonhole.
Buttons are round fastener sewn onto garments used to secure two pieces of fabric together by passing through a corresponding buttonholes.
ENUMERATE THE 4 STEPS IN PREPARING THE FABRIC BEFORE CUTTING
1.Pre-washing
2.Ironing
3.grain alignment
4.laying out the parttern
10-jovellanos
Fuentebella
1.Fold the cloth neatly and soak it in a basin of water overnight.
2.Hang the cloth and let it dry.
3.If the cloth is not smooth when it dries,pressing is necessary.
4.If the cloth gets out of shape,straighten it by stretching it diagonally.Stretch and pull gently but firmly until the edge and selvages are even when the material is folded in half lengthwise.
1.Fold the cloth neatly and soak it in a basin of water overnight.
2.Hang the cloth and let it dry.
3.If the cloth is not smooth when it dries, pressing is necessary.
4.If the cloth gets out of shape, straighten it by stretching it diagonally. Stretch and pull gently but firmly until the edge and seluages are even when the material is folded in half lengthwise.
DEFINE ZIPPER
Zipper is a fastening device consisting of two rows of interlocking metal or plastic teeth that are drawn together or separated by pulling a slider.
Zipper is a fastening device consisting of two rows of interlocking metal or plastic teeth that are drawn together or separated by pulling a slider.
Zipper is the fastening device consisting of two row of interlocking metal or plastic teeth that are drawn together or separated by pulling a slider
ENUMERATE THE 4 METHODS OF TRANSFERRING PATTERN MARKING
1. by using tailor's track
2. by using tracing paper and wheel
3. by using markers
4. by trace tacking
1.By Using Tailor's Tacks
2.By Using Tracing Paper and Wheel
3.By Using Markers
4.By Trace Tacking
10-GIBBONS
This are the 4 methods of transferring pattern marking
1. By using Tailor's tacks
2. By using tracing paper and wheel
3. By using marker's
4. By trace tacking
Belen, Dizah Rhiez SB.
10-FREER
1.Details should be marked on the wrong side of the fabric where most construction lines are needed.
2.If you use a tracing wheelchair and dressmaker’s carbon paper,mount these on a piece of heavy cardboard to protect tabla surfaces.
3.Use white tracing paper whenever possible because it is safe and easy to remove.
4.Use a ruler to make straight lines with the tracing wheel.Run the tracing wheel along the edge of the ruler with a firm and steady motion to avoid double lines,which can be confusing.
ENUMERATE THE 12 POINTERS IN CUTTING THE FABRIC
@@janfuentebella7083 saan to
1.place the fabric and pattern flat on the table. Avoid moving or lifting the fabric while cutting.
2.walk around the tables as you cut instead of pulling the fabric toward you because the fabric may slip or stretch out of shape
3.use sharp shears for cutting, making long strokes along straight edges. Cut the edge straight since it serves as your guide in sewing.
4.Cut the fabric starting from the widest to the narrowest part of the pattern. Begin cutting at an edge which us easy to reach.
5.cut with smooth, even strokes
6.keep the cutting edge of the top blade of the shears directly above the lower blade. Do not left the blades slant toward the table.
7.cut similar pattern at the same time by cutting them out from layers of fabric.
8.close the points of the shears right up to the notch. Close the points at the exact stopping place. Cut outward from the pattern to the exact tip of the notch. Cut inward to complete the notch at the cutting line.
9.when cutting curves, make your strokes shorter. Keep the hand close to the cutting line to have smooth curved line.
10.set aside cut fabric pieces to avoid cutting them accidentally as you work on other parts of the fabric.
11.after cutting, do not remove the pins and patterns because you will need them in marking your fabric
12.collect and tie all scarps of cloth together for future use. You may be able to use these for your recycling project.
Muceros Maricor
10-hill