Press seam allowances open, then press both edges together. Leave the seam allowances open if neither bodice nor skirt is bulky at waistline seam. Alexis R. Naag 10-jovellanos
1.Stay stitch waistline on seam line from side to center 2.Stitch darts and press toward center 3.Stitch skirt front to back at side seams press seams open 4. Connect the side seams of the skirt expectwhere the zipper will be attached Masapol 10-hill
Curved Seams 1.Press seams with outward curves open over a seam board or near the edge of pressing board. Press only 2"at 3" at a time. 2.Clip seams with inward curves to within +" of stitching. -Rivera, Elrose R. 10 Hill
IMPERIAL 10HILL 1. Press seams with outward curves open over a seam board or near the edge of pressing board. Press only 2" to 3" at a time. Complete the pressing over a rounded cushion or rolled Turkish towel, taking care not to shrink or stretch the seam line. Shrink edges of allowances to flattened seam for a better fit. 2. Clip seams with inward curves to within $" of stitching. Press seams open at seam line over seam board. Do not press beyond seam line at each side.
IMPERIAL 10HILL Press seam allowance open with tip of iron for an inconspicuous appearance. For some contruction procedures press both edges of seam to one side. The seam may be pressed open before turning and pressing the edges to one side. This may give a flatter line on some fabrics.
1.Stay stitch waistline on seamline from sides through center front 2.Stitch the darts, slash and press open curved darts 3.Finish the bottom edge of the facing with the side seams folded out Masapol 10-hill
IMPERIAL 10 HILL 1.Place the garment at the right side down over a well-padded surface such as a Turkish towel. 2.Place a pressing cloth over a placket. Hold iron lightly over placket and press from smaller part of garment to bigger one, such as from waistline to
Zipper Placketsa -piece of fabric that is used to surround and reinforce an opening of the garment. 1.Place the garment at the right side down over a well-padded surface such as a Turkish towel. 2. Place a pressing cloth over a placket. Hold iron lightly over placket and press from smaller part of garment to bigger one, such as from waistline to hip. . Anica Andrea F. Anuario 10-Hill
4 kind of seams
(1) Straight seams
(2)Lapped seams
(3)Curved seams
(4)Waistline seams
DEFINE LAPPED SEAMS
Press the turned edge of the top layer before placing it over the underlayer. Steam press completed seams.
10-Jovellanos
Rhayven Medrano
DEFINE WAISTLINE SEAMS
Press seam allowances open, then press both edges together. Leave the seam allowances open if neither bodice nor skirt is bulky at waistline seam.
Alexis R. Naag
10-jovellanos
DEFINE PLEATS
ENCINARES 10-JOVELLANOS
Fold in cloth made by doubling material over on itself. Also something resembling such a fold.
ENUMERATE 4 WAYS IN SEWING BACK AND SIDE SEAMS
1.Stay stitch waistline on seam line from side to center
2.Stitch darts and press toward center
3.Stitch skirt front to back at side seams press seams open
4. Connect the side seams of the skirt expectwhere the zipper will be attached
Masapol 10-hill
DEFINE CURVED SEAMS
Curved Seams
1.Press seams with outward curves open over a seam board or near the edge of pressing board. Press only 2"at 3" at a time.
2.Clip seams with inward curves to within +" of stitching.
-Rivera, Elrose R.
10 Hill
IMPERIAL 10HILL
1. Press seams with outward curves open over a seam board or near the edge of pressing board.
Press only 2" to 3" at a time. Complete the pressing over a rounded cushion or rolled Turkish towel, taking care not to shrink or stretch the seam line. Shrink edges of allowances to flattened seam for a better fit.
2. Clip seams with inward curves to within $" of stitching. Press seams open at seam line over seam board. Do not press beyond seam line at each side.
DEFINE DARTS
MANLANGIT 10-HILL
Darts are triangular folds of fabric stitched closed to remove excess fabric and create a three-dimensional shape.
DEFINE STRAIGHT SEAMS
Press seam allowance open with tip of iron for an inconspicuous appearance.
Jhon Arrol Ganit
10 -Jovellanos
IMPERIAL 10HILL
Press seam allowance open with tip of iron for an inconspicuous appearance. For some contruction procedures press both edges of seam to one side. The seam may be pressed open before turning and pressing the edges to one side. This may give a flatter line on some fabrics.
ENUMERATE THE 3 WAYS IN SEWING FRONT SKIRT
1.Stay stitch waistline on seamline from sides through center front
2.Stitch the darts, slash and press open curved darts
3.Finish the bottom edge of the facing with the side seams folded out
Masapol 10-hill
DEFINE HEM
an edge that is folded over and stitched down to prevent threads coming loose
DEFINE ZIPPER PLACKETS
IMPERIAL 10 HILL
1.Place the garment at the right side down over a well-padded surface such as a Turkish towel.
2.Place a pressing cloth over a placket. Hold iron lightly over placket and press from smaller part of garment to bigger one, such as from waistline to
Zipper Placketsa -piece of fabric that is used to surround and reinforce an opening of the garment.
1.Place the garment at the right side down over a well-padded surface such as a Turkish towel.
2. Place a pressing cloth over a placket. Hold iron lightly over placket and press from smaller part of garment to bigger one, such as from waistline to hip.
.
Anica Andrea F. Anuario
10-Hill
ENUMERATE 4 KINDS OF SEAMS
1. Straight Seams
2.lapped Seams
3.Curved Seams
4.waistline Seams
1.Lapped Seams
2.Waisline Seam
3.Curve Seam
4.Straight Seam
JHON ARROL GANIT
10 -Jovellanos
1.slapped seams
2.curved seams
3.waistline seams
4.straigth seams
MUCEROS MARICOR
10 HILL