I’ve bought the 3mm silicone pipework to do mine. Was always in two minds about it. Might give it a go and done like you guys and leave the original vac pipes there for now and see what i think. Great video again mate.. smashing it 🔥
Done this on my old zaffy gsi, tbf you can use it for a bit of boost by gear when mapping but I always liked getting everything 😂. Not sure my tyres/clutch/gearbox did though 😂
A always wanted to try that on mine but i have the t peice going to boost gauge in air vent from fuel regulator and mines boost by gear map ipf eds remaping tool a got from regal autosport years ago pick maps add upgrades when want
Do you do it the same way on the Corsa vxr I'm not sure if I have a problem with the vac box on mine and thought this could be a good way of finding out and it would be a lot cheaper than replacing the boost vacuum solonoid etc 👍👍👍
@@Yodaracing1 it has a stutter now and again when just coming onto boost I've replaced plugs , coil pack. Map sensor , boost intake sensor ,put on a turbo smart recirculation valve and actuator tried Tesco 99 Incase it was shell Vpower it didn't like and it isn't throwing up any codes ? It's not bad but very irritating.
@@Yodaracing1 I put a second hand one on to try but made no difference and I've got an aem obd gauge the readings for the maf on that seem fine I should buy a new one to try really but they aren't cheap When I bought the car and checked the filter it was a batterd pipercross panel filter and was really over oiled you could literally ring it out so it's probably my next move👍
@@Donovanthegoodthings2 the vac lines run from the bcs up to those hoses I showed in the vid you can just remove them but leave the bcs plugged in otherwise u will get error codes
It’s called a comfort unit by pepas.cz if you search it on vxronline will show all the features really hard to find never seen them come up for sale and I’m unsure if they still make them
Yea deffo worth while I didn’t advise it due to the m32 being made out of chocolate so obvs puts more stress in 1st and 2nd so didn’t wanna be blamed for anyone doing it and sending their gearbox into space 😂😂
@@Yodaracing1 defo mate ive went from cars to diecast cars rc monsters trucks and xbox series xs as me youngest son is into detailed diecast cars autoart lcd and am turning more into kid older am getting 🤣🤣🤣
@@brian.heslop.399 hahaha I literally have a loft of 1/18 scale model cars used to collect them when I was younger even have the supra and eclipse from f&f 😂😂
Mines at j spec proformance for fully forging over sizes pistons gear box upgrade bigger end case wave trac lsd 4 paddle clutch klassen manifold brand new piper exhaust system 3 inch gunna run that in then big turbo injectors tuberlar manifold with cat cams look for 450 to 500 bhp
@@jodywinter4287 correct mate if you look for my boost gauge fitting video I’m sure I mention where I T into the the vac line from the fuel pressure reg
I’ve bought the 3mm silicone pipework to do mine. Was always in two minds about it. Might give it a go and done like you guys and leave the original vac pipes there for now and see what i think. Great video again mate.. smashing it 🔥
Cheers mate yea man worth a go it’s easily reversible
worth it just to bypass the vac box which is often what pops off when you have boost leak
Nice work guys, glad James felt it was worth it. 👍
Nice one mate
Done this on my old zaffy gsi, tbf you can use it for a bit of boost by gear when mapping but I always liked getting everything 😂. Not sure my tyres/clutch/gearbox did though 😂
😂😂
What power is the ginger lads car running?
320 orange unicorns
Is 1 meter of new vacuum line enough? And will the silicone ones from Aliexpress suffice?
A always wanted to try that on mine but i have the t peice going to boost gauge in air vent from fuel regulator and mines boost by gear map ipf eds remaping tool a got from regal autosport years ago pick maps add upgrades when want
Iv figured it out how to do on a corsa but should I remove the box or keep it in place ?
Keep the box in place cuz if u leave it unplugged it brings on a engine light
@@Yodaracing1 brilliant thanks 🙏🏽
Do you made by your self this "hot air shield" or buy it??
Do you do it the same way on the Corsa vxr I'm not sure if I have a problem with the vac box on mine and thought this could be a good way of finding out and it would be a lot cheaper than replacing the boost vacuum solonoid etc 👍👍👍
I think it’s a bit different on the corsa tbh if memory serves me right lol what’s your issue ?
@@Yodaracing1 it has a stutter now and again when just coming onto boost I've replaced plugs , coil pack. Map sensor , boost intake sensor ,put on a turbo smart recirculation valve and actuator tried Tesco 99 Incase it was shell Vpower it didn't like and it isn't throwing up any codes ? It's not bad but very irritating.
@@mrvoorhees2627 hmmm possibly maf sensor ? Anyone local to u with a corsa that u can pinch their maf sensor to test on yours ??
@@Yodaracing1 I put a second hand one on to try but made no difference and I've got an aem obd gauge the readings for the maf on that seem fine I should buy a new one to try really but they aren't cheap When I bought the car and checked the filter it was a batterd pipercross panel filter and was really over oiled you could literally ring it out so it's probably my next move👍
@@mrvoorhees2627 worth a try mate failing that go to a tuner a get it data logged
I often think about doing this on my burg what boost/power is James running now?
James is running 320 not sure on psi though
What happens with the boost solenoid at the bottom ? is any pipes plugged into it ? Cheers
Leave it plugged in mate
@@Yodaracing1 Hi , so its got a inlet and a outlet yes ? Where does it plug into the car ?
@@Donovanthegoodthings2 the vac lines run from the bcs up to those hoses I showed in the vid you can just remove them but leave the bcs plugged in otherwise u will get error codes
@@Yodaracing1 the pipes or the electrical wires ? Im talking about the one on the vac box side
What exhaust system does the blue one have
Has a full remus system with a sports cat
@@Yodaracing1 thanks
@@Yodaracing1 love the Remus noise I have a 3inch downpipe plus decat for mine to but I swapped to Piper and I don't regret it one bit
Great vid again 💪🏻
Thank u mate as always appreciate your kind words and your support for the channel you’ve been here since the early days and it means a lot 🙌
Can it be done on a corsa ?
I think u can but it’s done differently I think but I’m not overly sure as never did it to mine
@@Yodaracing1 Iv been researching the web and UA-cam but can’t find any info on it
Thanks though 👍🏽 I’ll give it a go
how did you make it show the temperature on the display
Will get james to answer for u mate he can explain it better than me haha
It’s called a comfort unit by pepas.cz if you search it on vxronline will show all the features really hard to find never seen them come up for sale and I’m unsure if they still make them
Is that Redditch highway from moons moat to town lol 😂
Yea mate lol
The vacum of rear box has popped a few times over years so is probs a good thing people deleteing to elimate hassle like
Yea deffo worth while I didn’t advise it due to the m32 being made out of chocolate so obvs puts more stress in 1st and 2nd so didn’t wanna be blamed for anyone doing it and sending their gearbox into space 😂😂
@@Yodaracing1 haha yeah 🤣👍well no harm people trying seeing what suits them mate its a old trick from the mk4 gsi days
@@brian.heslop.399 Exactly that and it’s a cheap and easy mod lol
@@Yodaracing1 defo mate ive went from cars to diecast cars rc monsters trucks and xbox series xs as me youngest son is into detailed diecast cars autoart lcd and am turning more into kid older am getting 🤣🤣🤣
@@brian.heslop.399 hahaha I literally have a loft of 1/18 scale model cars used to collect them when I was younger even have the supra and eclipse from f&f 😂😂
Mines at j spec proformance for fully forging over sizes pistons gear box upgrade bigger end case wave trac lsd 4 paddle clutch klassen manifold brand new piper exhaust system 3 inch gunna run that in then big turbo injectors tuberlar manifold with cat cams look for 450 to 500 bhp
Awesome man !! Gonna be a weapon that
Where you from pal dint see you at the pod where was you parked
Dont do it on Z20LET's . After this mod boost was only 1.1bar . Normally boosted 1.4
Decent
Nice one mate
@@Yodaracing1 no probs buddy
Is that Redditch
Correct mate
@@Yodaracing1 sweet ur local then I'm in Matchborough with black 5dr sri turbo boosting around haha
@@johnhinds6308 haha will keep a eye out for u 🤙🏻🤙🏻
@@Yodaracing1 what ur name bud on FB will add u
@@johnhinds6308 don’t really use fb add me on Insta yoda_craig85
Just bought a big turbo manifold for mine 400bhp i not goin any higher then that
Epic mate !!! And hahahah famous last words them not going higher a year later your chasing 500 😂
@@Yodaracing1 ha yh cost 1.500 for big turbo manifold then need remap 2 i am broke now
@@restorevideos9634 I can imagine aswell mate 😂
Love a cheap mod 🥰🥰
Cheap ones are the best haha
The first thing my mate did to mine iam gona make your car faster 😂👌
Hahah cheap mod to do lol
Is this possible if you run a boost gauge as my vacuum pipe has split
Yea mate I’m running a boost gauge myself
@@Yodaracing1 I'm guessing just put a t joint in
@@jodywinter4287 correct mate if you look for my boost gauge fitting video I’m sure I mention where I T into the the vac line from the fuel pressure reg
@@Yodaracing1 brilliant thanks