Curved Epoxy Resin Table Lamp | Epoxy Resin Art
Вставка
- Опубліковано 19 лип 2023
- I am making a simple curved epoxy table lamp using olive and walnut wood.
On the lamp, touch on/off button and 12V daylight LED are used.
Mirka Autonet sandpaper was used during the sanding phase.
Mirka Polarshine 35 and Mirka Polarshine 10 were used in the polishing process.
If you liked the video, don't forget to like and subscribe to the channel to show your support.
Thanks for watching.
If you want to buy the products I made, you can check out my Etsy shop:
theatasoy.etsy.com
Instagram ➡️ / atasoy_59
Pinterest ➡️ / atasoy_epoxy
*These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk, my practices may not always be correct or the safest. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.
#epoxylight, #epoxylamp, #epoxyresin, #epoxyresinart - Навчання та стиль
Belíssima peça.
Me encantan estos trabajos. El proceso es muy interesante.
Gorgeous as always
I love how your mind works.
Thank you very much🙏👍👍
You make unbelivable work... Pure art!
Thank you very much, I'm glad you liked it.🙏👍
Incredible…. When you first hit the resin with your 80 grit bench sander, I thought that would be it! Incredible to see by working through the grades how you got it glass clear. Impressive!
Thank you very much, I'm glad you like it.
Your work is always impressive. Thank you.
Thanks I'm glad you like it.🙏👍👍
Beautiful!🥰💕💕
Thanks 🙏👍
Beautiful piece.
Thanks 👍
Комментарий в поддержку канала и ролика, а также труда мастера....
🙏👍👍
Que lindo trabalho ❤
Obrigado fico feliz que tenha gostado👍
Stunning 🎉❤
Thanks ❤️🙏👍
Un hermoso trabajo, gracias por compartir. Mis felicitaciones por el buen gusto y la dedicación
Muchas gracias, me alegra que te guste.
Very cool idea
Thanks, I'm glad you like it.
Incredible work 👍👍
Thanks 🙏👍👍
😍 Nice video, i love it
*una obra de arte*
😎😎
gracias 👍
Can a suggest a night light kind of aquarium build with moving fishes? Perhaps you can use a shaft and cogwheel made out of resin. That will be a gorgeous build! It will be challenging but rewarding.
Belle réalisation, comme d'habitude
Merci beaucoup 🙏👍👍
Woww nice
❤️😉
Amazing ❤
Thanks ❤️
Дуже гарно❤
Дякую 🙏👍👍
amazing❤
Thanks 🙏👍
Bu tasarım gerçekten çok iyi elinize sağlık 💯
Çok teşekkür ederim 👍
great job man, this was a tough one!
thanks 🙏👍
très sympa comme toujours !
Merci beaucoup et merci beaucoup de m'avoir toujours soutenu.❤️🙏🙏
@@atasoy 😉😊👋
It would be really cool to introduce some laser sources on one end of it beings criss crossing in the resin. unidirectional coherent light source dont give that effect. I am inspired to try this but not sure if I go epoxy route, too much work, I will try with acrylic sheets. I know it does internally reflect lasers quite well and if you do frosted, it would feel likes its glowing.
Really cool project!
Sen bir sanatkarsin başkan❤❤❤
Eyvallah başkan 🙏👍👍
If I wasn't broke I would 100% buy these masterpieces. Amazing work as always!
Thanks I'm glad you like it
gerçekten çok güzel, eline sağlık❤
Çok teşekkür ederim beğendiğinize sevindim 🙏👍👍
Brilliant work! I don't know anything about this stuff but I love watching and understanding it! You're vid was helpful! =).
Thank you very much, I'm glad you like it.
@@atasoy One more question; where did you buy the light from? Is it sold exactly as you purchased (touch button/strip/anything else)? Sorry! This one is not a touch button. But I'd like to buy the exact same set-up you have to try this out! Thanks! =).
a.aliexpress.com/_EJwuRAJ
a.aliexpress.com/_EzkhBmR
Sehr schöne Tischleuchte. 👍👍👍
Vielen Dank.👍👍
@@atasoy Danke auch. 👍👍
Very nice design & build!!! Fiber optic cables maybe worth exploring for future projects.
Thanks, I'm thinking of doing something with fiber optic cables, let's see what kind of project I will do about it in the future, I'm wondering too.
Eline sağlık çok güzel 🙏
Teşekkür ederim 👍👍
Nice
thanks 🙏👍
çok beğendim eline sağlık ❤
Teşekkürler, beğenmenize sevindim. 🙏👍👍
Elinize emeğinize sağlık 👍
Teşekkürler 👍👍
Good
Thanks
Very nice indeed. I’ve been a woodworker for over45 years and have worked with epoxy for many years. Its not my favourite thing to use with wood although I understand it can mean using pieces that would otherwise be fire wood. However, your use of epoxy is imaginative and clever. Many congratulations.
Thank you very much, I'm glad you like it.👍👍
Beautiful, if you ever start sell them sign me up for one, after the wife see it most likely two more, lol.
Sold
Çok güzel 🎉
Teşekkürler 🙏👍
Как декоративный элемент,красота. Как лампа фигня))
🌬🔥
Kullandığın epoksi tür ve markalarıyla ilgili de video yapar mısın
Genuine question: wouldn't it be better to try to insert an LED inside where epoxy meets wood? Drill a hole in the wooden piece or smth. And probaly a couple of tiny ones for ventilation purposes.
I've got no idea if it would work but I suspect it may fill the epoxy part with light in a slightly more natural way and instead of redirecting it would start emitting light. But you won't be able to place many LEDs there of course...
In my previous works, I applied lighting as you mentioned, in this work I wanted to try such lighting. Thanks for your recommendation.👍👍👍
What is the small printed circuit board you are using both here and on the heart? You've given me a great idea for my next project. Thanks.
This is the circuit that acts as a touch button.
a.aliexpress.com/_Ey5DSPh
how do you cut so easy with the band saw? every time i try, with a fence or not. The blade wants to start curving. Every single time. Please help if you can.
The video is accelerated while using the saw, please take this into account.
If your saw wants to go left and right while cutting, the saw teeth are deformed, you should either sharpen the saw or install a new one.
Excellent as always. I didn't get how you installed the button
This circuit is magnetically tactile. Thanks to this, it acts as a touch button very easily inside or behind wood and similar materials.
After the necessary electrical connections are made, all you have to do is to position the round small copper plate at the end of the circuit in a suitable place.
aliexpress.com/item/1005004755138866.html
Super boulot, c'est très beau ! Il s'agit d'une simple feuille de papier (cartonnée ?) qui te permet de faire le moule de la forme où tu verses la résine époxy ?
Merci, je suis contente que ça te plaise.
Oui, j'ai utilisé une simple surface en carton comme moule en la recouvrant de scotch transparent.
@@atasoy Merci pour la réponse et l'astuce :)
Beyaz renkte kesip kalıp yaptığınız kalın kağıt mı? Nedir? Emeğinize sağlık, diğerleri gibi çok iyi👍🏻
Mukavva karton
Hello, I really enjoy your work ❤️❤️👏 May I ask what you do so that the resin does not scratch easily?
There is no method I currently use.
@@atasoy thank you so much...🙏🌷🌷
Amazing! Well done! Could you tell me please where can I buy this touch device switch on/off?
Thanks 👍👍
a.aliexpress.com/_EuFyOIx
thanks a lot@@atasoy
How do you prevent the resin from sticking to the wood base?
I cover the floor with large clear tape.
First view first like
Pls reply sir
Did you have a question, what do you want me to answer?
Здравствуйте, подскажите, сколько затвердевает эпоксидная смола?
24 часа.
Время высыхания эпоксидной смолы зависит от типа используемой эпоксидной смолы, ее количества и температуры окружающей среды.
Ottimo video illustrativo. Complimenti per il lavoro e per la buona idea semmplice ma molto interessante , come il resto dei tuoi progetti. Ti chiedevo se era possibile avere qualche link o nome del tipo/marca di resina che hai usato . Grazie!
Grazie mille, sono felice che ti sia piaciuto.
La marca di resina che utilizzo è Resinin.
Condivido il collegamento al sito web.
resininresin.com/
Great lamp but what paper did u use to make rhe mould
Thank you, I'm glad you liked it.
I used cardboard. I covered it with clear tape to prevent the epoxy from sticking.
@@atasoy thanks
Elinize sağlık dokunmatik switch butonun linki var mı hocam?
Teşekkürler, linkini paylaşıyorum ama şuanda aliexpress tarafından türkiye'ye gönderim sağlanamıyor yazıyor. Eğer satıcı ile özel olarak mesajlaşırsanız size gönderim sağlayabilirler.
a.aliexpress.com/_ExfIiCB
it's really nice. I think it would be better if you sandblasted the crystal
Thanks, I'm glad you liked it.
I don't understand what you mean by sandblasting the crystal.☹️
@@atasoy
Sorry, I thought it was some kind of crystal or glass but when I re-watched the video I realized it was epoxy resin.
In my opinion it will be better if you made it blur.
You can do this by sandblasting or maybe using sandpaper.
This helps the light spread better like a diffuser.
Unfortunately, this process creates a very bad appearance in epoxy.
Sandblasting or sanding will make the surface look very bad.
Your advice is very valuable to me, thank you very much for expressing your opinion.
Merhaba, etsy de sattığınız ürünlerinizi hangi kargo ile yurt dışına gönderiyorsunuz? Maliyeti ne oluyor?
Merhaba, navlungo.com ile gönderiyorum. Siteye kayıt olarak paket desi si ve gönderim yapacağınız ülke için fiyatları teklif alma ekranından öğrenebilirsiniz.
@@atasoy teşekkür ederim
Rica ederim
What material do you use to make the frame?
I use cardboard and cover its surface with transparent tape.
O dokunmatik düğme ahşapın altından nasıl algılayabiliyor
Teknik olarak bilmiyorum.
Bu düğme prensibinden çok yakınlık uzaklık mantığı ile çalışan bir sensör sanırım.
ton interrupteur et digital ? peux tu mettre un lien pour l'obtenir merci
a.aliexpress.com/_EHyJCyL
Elinize sağlık , kalıpta kullandığın beyaz malzeme nedir
Teşekkürler, beğendiğinize sevindim.
Beyaz mukavva, yüzeyini ise koli bandı ile kaplıyorum.
@@atasoy teşekkür ederim cevabınız için , bir de dökeceğiniz ağırlığı nasıl hesaplıyorsunuz acaba ?
Hacim hesabı yaparak bulabilirsiniz.
Ben yapacağım modelleri bilgisayarda taslak olarak çiziyorum, düz olmayan parçalarda kalıbın hacmini yaklaşık olarak çizdiğim program sayesinde buluyorum.
Hacmini bulduğunuzda çıkan rakamı 1.05 ile çarparsanız daha net ağırlık çıkacaktır.
Küp, dikdörtgen, silindir, koni ve küre kalıplarınız için online hacim hesaplama sitelerinden yararlanabilirsiniz.
@@atasoy teşekkür ederim, benim de aklıma geldi de yine de daha iyi bilene sorayım dedim. Solidworks de çizip oradan dediğiniz katsayı ile çarparak kullanabilirim o zaman, teşekkürler
Rica ederim kolay gelsin.
Hallo, vergilb es mit der zeit oder ?
Es besteht die Möglichkeit, dass es nach sehr langer Zeit etwas gelb wird.
Dies hängt von der Harzqualität des Herstellers, dem Handwerker, der das Harz hergestellt hat, und der Zeitdauer ab, die die Lampe dem Sonnenlicht ausgesetzt ist.
Hi, Mind blowing, Would you pl let me know, R you selling these products
I add the products from the videos to my etsy store so that my viewers can buy them.
theatasoy.etsy.com
@@atasoy great, will see
But I want directly from you so that I can resell at my shop
What's the tool you used at 6:20? Love the video.
Dremel 4000 engraving machine.
@@atasoy Thank you!
How does the switch work?
This is a proximity sensing circuit that works like touch.
After making the necessary connections and positioning the round yellow copper plate and the circuit, it is ready for use.
It detects from behind the wood up to approximately 2 cm. (I only tested it on wood, I did not test it on other materials such as metal or plastic.)
It has a very simple structure.
One-touch on-off, and long touches change the brightness of the light.
🤯
I guess you are not satisfied with the answer. What exactly are you wondering?
@@atasoy no I am satisfied, it just blew my mind as I don’t know anything about electronics
I am sharing the product link.
The connections are shown in the picture.
What is the value of this beautiful work?
theatasoy.etsy.com
кривовато, но как декор сойдёт
I'm up all night to get lucky
Sevgili kardeşim.Tamam güzel yapmışsın tebrikler ama bu şekil nedir?Birini yada birşeyi mi temsil ediyor???Hayır eğer temsil etmiyorsa bence olmamış.Şekil çok kötü yani.Tamam işçiliğine diyecek lafım yok ama şekilin ne olduğu anlaşılır değil.
Birini veya birşeyi temsil etmiyor, evet çok kötü olmuş.
Man why freakn background music nonsense...
Epoksi döktükten sonra herhangi bir çatlak olmamasını nasıl önlüyorsunuz?
Nasıl bir çatlaktan bahsediyorsunuz anlayamadım.
@@atasoy Bazı epoksi kullanıcıları çatlak oluşmasın diye basınçlı bir kutuya koyuyolar.Oyüzden sordum.
Basınçlı tank kullanımı baloncuk oluşumunun minumum seviyeye indirmesi içindir.
Vakumlamaya alternatif olarak kullanılmaktadır.