Це відео не доступне.
Перепрошуємо.
Axial SCX10 JK Jeep Wrangler Upgrade - Scale 4x4 Truck Project Overview - March 2014
Вставка
- Опубліковано 25 бер 2014
- The Axial SCX-10, is worlds most recognized 4x4 scale off-road Truck! With Several different variations of the model, they all resemble one thing! FUN! No matter how young or old we are, Their is an SCX-10 model out their for someone!
Well mine was the Axial SCX-10 Jeep Wrangler Rubicon 2012! This truck has been the best RC truck I have ever purchased! This truck has taught me so much over the past 10 months, from the design and operation of the truck to realizing how much of a community their really is out beyond my workbench.....
With the help of watching DjMedic2008 (Owner & Operator of RC Adventures & RCSparks) Who has led me into a whole other world of RC's With Scale trucks. I have taken my very first scale truck and turned it into a dream machine! With that said I look forward to producing so many more videos for all of you, and enjoying the fun and adventures that this truck brings with me and my family!
The Axial SCX-10 has undergone a complete overhaul. I have done so many different things, including a scale Firestick Antenna, Teken 35 Turn motor, plati -diping the ESC, Waterproofing the axles, to RC4WD Bumpers, and LED lights. Now their are a few things I still need to do to the truck like, Install a custom LED light kit, and Install a Winch. But those will come in time.
I hope you all enjoy this video of me showing and explaining the few things I have done to this truck. Please feel free to ask me any questions, and I will do my very best to answer them for all of you. you will find below a list of all the parts installed on the Axial SCX-10 Jeep Wrangler at the time of this video.
Axial SCX10 Jeep Wrangler Rubicon Unlimited - amzn.to/2aTxfUE
INSTALLED PARTS AS OF - 3/26/2014
-Traxxas 5000MAH 2s Lipo Battery - amzn.to/2JqCPgN
-Axial Solid 4 Link Suspension , Solid steering link (kit) - amzn.to/30aRFhs
-Deans connectors - Hobby Store
-Spectrum DX3C Controller and Receiver - Not available
-Axial Light Bucket Kit - amzn.to/307RuU4
-Axial Light Bucket Lens Kit - amzn.to/307RuU4
-Axial Full Metal Transmition Gear Set - Not available
-Axial Simple Led Controller - amzn.to/2YkcLrL
-Axial 2 Red / 2 White Led Sets - amzn.to/2YkcLrL
-Savox Waterproof Steering Servo w/steering horn - Not available
-Proline Roof Rack and Accessories - amzn.to/2Ykd9qd
***Some parts are no longer listed due to being discontinued.
Music Found in the video is from the Following,
- "Revolution Now" by Josh Woodward - www.joshwoodwar...
-"Penumbia" Kevin MacLeod (incompetech.com) Http://www.rcoverload.com
Thanks for watching and don’t forget to subscribe and hit that notification bell!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~PRODUCTS USED IN TODAYS VIDEO~
-----------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~AFFILIATES & COUPON CODES ~
------------------------------------------
VenomRC.com (Team Driver)
www.venompower...
AsiaTees.com
bit.ly/21fgIKh
ProLineRacing.com
(10 % Coupon Code - RCOVERLOAD10)
www.prolineraci...
RCJuice.com
(10 % Coupon Code - RCOVERLOAD10)
www.rcjuice.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~RECOMMENDED PRODUCTS~
---------------------------------------
RC Overload Shop - (Everything I currently use or have used before)
www.amazon.com...
Camera & Computer Gear - (Everything I currently use to film and edit with)
Camera Gear - amzn.to/2JdxfPB
Computer Equip - amzn.to/2E3LIcB
T-Shirts & Accessories
teespring.com/...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ RC OVERLOAD SOCIAL MEDIA~
---------------------------------------------------------
WEBSITE - www.rcoverload...
FACEBOOK - / rcoverloadmatt
INSTAGRAM - / _rcoverload_
TWITTER - / @rcoverload
162 MEDIA - www.162mediapr...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~DISCLAIMER - RC Overload & 162 Media Productions~
*** The product(s) shown in this video may have been sent to me for review or for promotional means. Many of the links in the description box are affiliate links and I may benefit from a small affiliate commission if you purchase something using the links above. RC Overload is not responsible for your "own" actions with your radio controlled vehicles that is or was performed by yourself or anyone else.
© RC Overload & 162 Media Productions, All Rights Reserved.
Enjoyed your video. I love my SCX10. I have the links and relocated my battery to the front. Relocating the battery made a world of difference in the performance. Keep up the good work.
Awesome! Im glad you liked the video! And i was going to re locate my battery up front as well. But i do have a plan on installing a second battery in the front end to power all of my lights and the new winch that i have coming for it. So hopefully i should see some better traction up hills after that. Thanks again man!
Thanx man that would help a lot of newbs like me
great video I love the Jeep that's on my list now ! great camera angles and good quality too thanks for the video
+Josh Turner Thank you!
You did good buddy. Very informative and clear. Thanks. Very nice jeep!!!👍
Thanks man, that was my goal. I want to help others so they can make the right choices on their own rigs anyways.
If anyone is interested in seeing a list of all the Parts installed on this rig, I just finished updating it in the description box!
Nice vid can't wait to see more
Thanks man. I have another one i just need to edit and upload it at some point this week...lol
Ok can't wait to see another vid of your jeep
I should have 2 more of the jeep up tgis weekend from last weekends adventure with my son
Great didn't know you had a son can't wait to meet him
Thanks for the parts list! Super helpful! Love your series.
Hey no problem. I remembered, you had asked for a parts list before. So i did my best to come up with it for yo,u and everyone else! Thanks for watching i really apricieat it!
Just a quick upgrade is to put the battery in the front. It keeps it from flipping backwards on steep hills.it is simple I did it to mine to it is in the booklet that comes with scx10.
GMade Zero Shocks 104 mm work awesome! I have them on all my trail trucks!
Looking great Matt. Awesome video. Your Jeep is looking and running sweet bro. Thumbs up!
Thanks man i really apricieat it!
Hey man.. more movies with you crawling!! 💪💪💪 thx for what you done. Help me alot!
Loved your video my brother. Going to buy me one.. Now. Thank you.
Gear Head RC 2.2 Five Star EZ-Loc Beadlock Wheels and RC4WD Interco IROK 2.2 Super Swamper Scale Tires, running a 2400Kv Castle creations motor with a sidewinder 3 ESC. I also use the HPI Tx & Rx Low cost and plenty available on EBay!
Awesome video Matt. Where have u been. Have not seen videos from in in a long time. Hope all is ok with u.
Thanks for sharing!
Great video, love this truck!
Subbed :-)
Im a Huge Fan of your Videos.And I Have Subscribed.Can't wait to see the nexst Video.
andrew richey Thank You ! Ill have some more up soon! :)
Great Video, just got same rig as yours, it is awesome and sick looking rig... Planning to add led lights on its bumpers like you did.
Jerry Garganera Heck ya man! and thank you! if you ever have any questions....shoot me a message on either google+ or Facebook!
+RC Overload upgraded mine as well, added axials icon shocks, aluminum links ax30550, added nvs, and led lights and axials light bar set. i also change my servo to savox SA1231 SG. and still lot of things to upgrade. it is almost a full option scx10.
It is pronounced 'axial' like 'axeeeaal' not axle
great video bud well explained
+scott meggy Thank you
This is so cool you should attach the camera to the jeep
+RouG Trickier I have a couple of videos with the go pro mounted on the jeep actually!
Nice!
These are great videos Matt and you're really funny too! Thank you for taking the time to help newbies like me. I truly appreciate all of your thoughtful insight, ideas and inspiration. I'd love to have a truck like yours, a few questions. What ESC do you like best? When you guys talk about waterproofing these ESC's in balloons, I'm assuming that you use tool handle rubberized coating at the end of the balloon where the wires come out? I thought they ran hot? How would you approach a build if you could do it again ? The last r/c car I had was a kyosho inferno 7.5 and I've been on the sidelines for 10 years. It looks like the streering linkages need to go right away. I looked into motors too and I find the model choices confusing. I looked up your model of motor and the pictures don't look the same.Thank you so much. Matt
Thank you so much! it really means a lot to hear people say that! now lets see if I can answer some of those questions for you.1 - "What ESC do you like best?" -Well I am still a newb myself, so unfortunately I haven't had much opportunity to test out any other ESC's other then the Stock Axial ESC that came with the truck. But so far I am really happy with the way it operates.2 - " When you guys talk about waterproofing these ESC's in balloons, I'm assuming that you use tool handle rubberized coating at the end of the balloon where the wires come out? I thought they ran hot?" -When it comes to waterproofing the ESC I actually plasti-dip the circuit board and leave the heat sink fins exposed. Plasti -dip is a liquid rubber that comes in a can, that you can get at most hardware stores. Leaving the fins exposed allows for any heat produced by the ESC to escape without any problems. I do how ever use a balloon for the receiver and Axial Simple LED Controller that I have put inside the receiver box. I then tie of the end of the balloon with 2-3 zip ties.3 - "How would you approach a build if you could do it again" - Honestly I don't know....Each build has its own unique approach. It would really depend on what the purpose for the next truck would be for. But I would probably start off with upgrading the plastic 3 way control links that come stock to the Solid 4 way control link kit made by Axial. ( In my opinion, that is the number 1 upgrade all Axial SCX-10 owners should do first!)4 - "I looked into motors too and I find the model choices confusing. I looked up your model of motor and the pictures don't look the same" - My Motor is the basic Teken 35 Turn Brushless motor. If I do remember correctly Teken I has recently released its Teken 35 Turn HD motor, witch may be what you keep seeing. I did purchase my motor from CKRCcrawler.com. You should see it right away when looking it up in the motors section.-Thanks again for watching! Hopefully I have answered your question, and if you have anymore please feel free to let me know!
very nicely done!! I like the different approach..keep up the good work!! only thing...it needs a driver brother...lol
Haha yea I am working on something...The problem I run into is, either the person is too big or awkwardly small.....haha
youll find someone...lol I cut one in half...then used Velcro to stick it back together for the times hes not in the truck...fun stuff!
Well thats an idea i never thought off...i am probably gonna half to use that idea ....lol
my stock rear shocks are busted. would u recommend these as an upgrade? my rig sags badly in the back.
Nice, a sound unit and driver would complete the picture
very nice video !
+Mike Hobby Channel Thanks!
Nice!!!!
cool
My Jeep operates like a real Jeep, too. WAIT! Mine IS a real Jeep! :-)
It does look fun, though.
+Jim Doss Haha They are a lot of fun! I my self am very much into full size jeeps and off roading. however were I live they have cracked down hard on off road trailing (1:1 sized) So for now this is a great alternative for my self!
+RC Overload I'm in the same boat! can't off-road my actually vehicle so I scratch my it with my Rc cars. I find it to be very satisfying
+RC Dude scratch my itch ***
What happened at the end?
So, how much money do you have invested to get it to that point?
where would you consider buying this at
Hey Matt I know you have updated the scx10 with your new version along with upgrades but the 90mm shocks from hot racing actually perform really well as seen in this video. You now have the king 100 mm shocks which do you prefer? I like the way the kings look but the hot racing performed well. I like a little more bounce but I want to get the king shocks 90mm what weight of oil do you prefer to get that kind of performance?
ok cool
yo was just at the hobby shop been watching ur videos for a while was that's u and I said something about the xmax
haha, yes thats me.
Nice video. Your bumpers are the rc4wd rampage ones?
Reflective Window Cleaning Inc yes
I NEED HELP WITH WATER IN TYRES!!! I am going to be getting some RC4WD Rok Lox 40 series tyres for my summit, along with some 40 series plastic bead lock rims from RC4WD. Will this keep out the water from my tyres? Do bead locks in general keep the water out of your tyres? Or just those Axial ones? Please answer i really need to know, its one of the reasons I'm buying new tyres for my summit, i don't want it to happen again. Thanks.
Oh and i forgot to mention that they are internal bead locks if that makes a diference?
Bead locks have nothing to do with anything except the fact the tires are secured to the rims by bolts and not glue.
To fix a water in tire problem simply drill holes in your tires (1 or 2) on the summit.
Centrifugal force qill push the water to the outside and let it come out.
Im looking at geting the front bumper for my jeep how do you like it any information would be great
Charlie Morgan Its definitely an awesome front bumper! Very simple to install, I do have a video on it within my jeep build series.
The Rok Lox you're running. Are those the 1.9 or 2.2's? I'm about to build a Rubi which will be everything but standard. But i am in doubt about the tires. Your's look ok for size.
1967illya Those are 1.9's
RCoverload Thanks Mat!
No problem man.
Wheres the list of your upgrades?
I want to upgrade mine
John Dev I have had a lot of people ask me for an upgrade list. unfortunately I don't have one right now...but im considering doing a video were I list every thing I have done
Have you replaced the battery to the front after this video?
Lars W Gjethammer Not yet. All of my videos up till now are with the battery still in back. However im currently working on doing some changes to it and moving the battery up front it one of those changes.
Nice :)
those tires look a bit stiff. can u run lower pressure in them?
+jpaugh4 They actually don't run off of pressure. they have foams in them and yes you can get different foams to change around the softness of the tires.
agreed your get way more grab with softer foams or 2 stage foams.
very nice:) @channelquake24
+channelquake24 Thanks man! Btw Just Subed to your channel! Awesome Videos!!!!
How do you say it? Axle? Or Axial?
+Matthew Barnhart ITs Axial. I know i was pronouncing it wrong thier for a wile. However i have sense corrected it. Haha
I bought a all aluminum integy winch for $50
how fast can it go
5-10 MPH at the very most
Just the base model would pay my land rent and buy my family food for a month.
it's 379 dollars for a base model
How much did you get it for?
I got the truck for a little under 400 last year. Then put another couple hundred into it to make it look the way you see it now.
I love the look of the rig but my stock scx10 dingo with 55T motor does everything you've done and a hell of a lot more, to be honest most of those upgrades seem like a waste of money...
+Moto Tayls I have the Dingo with the 55T. Anyone who owns the Dingo knows it's shortcomings. It badly needs the four link conversion. I did it on the rear and it made a big difference, better performance and no more Y-link popping off the axle. I'm going to do the front as well. The Four link alone is well worth it.
how long can you drive with one lipo?
Lorenz Globits Im currently running a 2s 5000MAH Lipo which gets me about 3- 3 1/2 hours of run time. Depending on what im doing with it.
Thanks for the info! Awesome videos keep going ;)
It's a Jeep thing...
Keep should be more a little bit bouncier for realism
Would you upgrade my SCX-10 if I mailed it to you?
Michael Christopher Sure. But id half to charge ya labor. ;)
is it 300$
Derrick Beard The truck is closer to 400$
soory
Ax- i-al, not Axle.
Marc Poletti my point exactly
is is 300$
It’s not axle it’s ax-i-al
Ya i know. Kind of hard to change what i said almost 3 years ago. lol
you pronounce Axial weird.
U seem way to serious like I love RCs and I am in to it but don't talk about it like life or death