2017 - 2020 Super Duty Cabin Air Filter - How To Remove Replace Change Ford F-250 F-350 F250 F350
Вставка
- Опубліковано 21 сер 2024
- An easy to follow DIY video tutorial on how to replace the cabin filter on a 2017 - 2020 Ford Super Duty truck, including F250, F350, F450 and F550.
Cabin air filters help enhance the air quality inside your vehicle, creating a healthier, more comfortable environment for you and your passengers. A properly functioning cabin air filter can stop up to 90% of dust, pollen, and spore particles from entering the f250, f350, f450, f550 passenger compartment.
WHEN SHOULD YOU CHANGE CABIN AIR FILTER ON YOUR 2020 F-250, F-350 F-450 or F-550?
Ford Motor Company recommends that you remove and replace this cabin filter every 15,000-20,000 miles.
However, you may want to replace or change the cabin air filter more often if:
-You or a frequent passenger suffers from allergies
-You or a frequent passenger has other respiratory problems
-You drive your f150 on dirt roads or in excessively dusty conditions
-You drive your f150 in heavily polluted areas
This video tutorial can be used to help remove, change or replace the cabin air filter on the following years of Ford Super Duty F-250, F-350, F-450, F-550 : 2017, 2018, 2019 and 2020.
Well done. Others should watch this to see what a good video looks like. Well exposed, well shot, clear, straight to the point and concise.
Thank You!
And no music blaring over his voice. Bravo!
BRAVO, BRAVO, FINALLY THERE IS SOMEONE THAT KNOWS HOW TO EXPLAIN A REPAIR. I HAVE LISTENED TO LITERALLY HUNDREDS OF VIDEOS. YOU EXPLAINED THE PROCESS CLEARLY, CONCISE, AND STRAIGHT TO THE POINT. THE VIDEO WAS CLEAR, AND IT SHOWED ALL THE PROCESS WITHOUT GOING OUT OF FOCUS OR OFF INTO SPACE. THANKS FOR THE BEST VIDEO I HAVE SEEN TO THIS DATE.
Thanks for the kind words! Glad it helped
Thanks a lot for your video, I like how you get to the point and don't tell stories about your life etc like other people do. Great job man.
Thanks! - we do try to keep them as short as possible
Amen to that.
@@PYR-Autothanks. Most of these jokers just wanna hear themselves talk on here
This video was awesome! Made the process so simple and makes me question why my Ford dealership wanted over $300 to change the cabin and engine air filters. Literally took me less than 10 minutes for both and did it for $65 total by ordering from Amazon. Thanks so much!!
Nice! You're welcome!
Boy, this made my life soooooooo much better. I inherited a truck at work, f550 and you can hear the vacuum being pulled at the filter. Was really worried it was one of them rip apart the dash ford's to get to it. This truck just got waaaaaaaaaaayyyyyyyy better. Thank you very much.
You're welcome! Glad it helped
Very nice brother. No music no kids crying no B.S. Thank you so much for a great video.
You're Welcome! Glad it helped
Straight forward and no-nonsense video of how to! Great job.
Thanks!
Thanks for making a short to the point video on this I've been trying to find this filter on my truck for over a week and now I can get it changed quick and easy. Greatly appreciated sir.
You’re Welcome! Glad it helped
Perfect video. It was short and to the point and worked as you described! I saved over $100 by not letting the dealer do it. The only thing is, why did the Ford engineer bury such a simple thing so deep in the dash? I bet the dealer will say it needs changing again the following oil change I go in for. TI'm sure they do not do all that in their routine checks during an oil change and just say it is needed.
Man you saved the day! I’m out in west Texas and it’s 107° right now. I swapped this out on location and man the difference was night and day!
Glad it helped!
Very good instructional process. Good pace. Not hurried. Not hyper. A note to DIY folks specifically in regards to this cabin air filter element. Please be advised. Use the OEM FORD MOTORCRAFT filter element. There are horror stories where a cheap aftermarket element was used, and structurally failed, and then got sucked/blown into the air conduits. Very difficult and expensive to remove failed element.
Installed K & N filter as directed on a 2019 F-250 with ease. Thank you 🙏
You're Welcome!
I have a 2019 F 250, everything is same as your video, I used a flat bar since I didn’t have a trim tool. Every thing went as you said, Piece of cake.Thanks
You're Welcome!
Was ready to take my pick up to the dealer to have the air conditioner worked on and realized that it had sucked a napkin out of the glove box up and was restricting the airflow. Thank you.
You're Welcome!
This was so helpful. I couldn't have asked a simpler breakdown. Thank you so much for this!
You're Welcome! Glad it helped
Great video, went exactly as shown. After 3 years, filter absolutely needed replacement.
Thanks! I bet!
I do like your simplicity not trying to talk down to everybody thank you for the video
Glad it helped!
Thank you for teaching me how to change the cabin air filter in my work truck.
You're Welcome!
Thanks! Was able to pull plastic cabinet out without the trim tool, after lowering the glove box, removing the rubber grommet and the screws I reached behind it and pulled toward me and it popped out. Thanks for the informative video.
You're Welcome! Glad it helped
This worked great. FYI it was not necessary to drop the glove box. I did mine in a couple minutes without dropping the box.
I would have ruined my dash if I didn't watch this video first. Great job!
Thanks! Glad it helped
I feel ripped off now lol I’ve been paying for this to be done, great video!!
Glad it helped!
Ive always done it myself on customers vehicles when i clean them and they want a smokers smell to be gone so i just charge them whatever the new air filter costs so im curious what you had to pay to get this done lol?
I don’t know why Ford can’t make anything simple or convenient for us to get to. Every other vehicle out there you drop the glove box and the filter is right there. No other steps. The other thing that really pisses me off is they don’t put a wiper fluid reservoir on these that is a full gallon. So anytime you refill the wiper fluid you have a little bit left in the jug. It’s not like there isn’t space on this huge truck for 1 more pint of reservoir.
How many other vehicles have you changed them in? A lot of them are like this
@mikeadams42 other pick up trucks are not like this. Maybe cars where there's not a lot of space. Ford makes everything difficult, they've been doing this for 30+ years.
Thanks your video showed me what I needed to get the filter cover back on correctly. Another one I started with did a poor job at this point. Now if I can just find my 7mm socket wrench😅
You're welcome! Glad it helped
Thank you for posting this. It was a huge help.
You're Welcome!
Clear, simple and straight to the point, THANK YOU!!!!
You're Welcome!
Thanks for the good directions. Need to see the filter to make sure I'm buying the right one. Thanks again
You're Welcome!
Great video, made this job much easier.
Thanks! Glad it helped
Thanks for making this video. Was a huge help. Air filter changed.
You're Welcome!
Great instructions...easy to follow!!!! Thanks!!!
Thanks for watching!
Thanks for the video. I would like to add that k&n sells a washable filter for this and fwiw I left those 7mm bolts out. Hasn't caused an issue and I can now pull the filter without any tools
Very fast and no bs, just straight to the point. Thank you and a new Sub.
Thanks!
The air flow pointing down, got it. Awesome video thanks
You're Welcome!
Thanks. The video will be a big help in changing out the filter in my 2019 F250.
You're Welcome! Glad it helped
Nice!! Now just need to see if a 2016 SD350 is as simple. I dropped the lower glove box off & did not realise the top section opened lol
Awesome video. Quick and no fluff
Thanks!
Thanks! Very easy to follow and informative!🇺🇸😎
Glad it was helpful!
Thank you! Have my K& N filter installed now! Great video!!
You're Welcome!
Thanks, I didn't know where it was at and it looks simple enough to do.
You're Welcome! yeah its not too bad
Excellent vid! Got me out of a bind, thanks!
You're welcome! Glad it helped
Perfect! Thank you. Now to find that filter from K and N.
I prefer the charcoal enhanced filter to filter out odors as well as other things.
Wow! A rodent died in my work truck and I’m pretty sure it’s next to the air filter! Thanks for making this video
You're Welcome! Hope it helps - mice nests can be a pain
Very good video. I can’t understand why any one would give a thumbs down.
Thanks!
Thanks. I'll see if my cabin filter is located in the same place on im 2020 F250. Have a fine week. Full-watch. 👍🏽🤠 4/13/23
Be a good idea to tell people which way air flow goes in case they don’t pay attention to which way it came out
Great video and will make it easy for me to change mine out. Thank you!
You're Welcome!
Great video! Exactly what I needed to change my filter!
Glad it helped!
Great content, straight to the point
Thanks!
Thank you. Just did it following your video
Nice! You're Welcome!
Tutorial is spot on! Thanks!
You're welcome!
Thanks. Love that it is short and to the point. Great Video
Thanks!
The fun part is when the manufacturer cuts the wires to short so you can't pull the box out or at times can't move it at all. Snapped a few wires on those. Hope the customer never wants to lock that red thing or a glove light. Blame the manufacturer not me. I did what I had to
Well done, thanks a million!
You're Welcome!
Great video! Need that trim tool, i did it without it but it was much harder!
Yeah, it does make it much easier
Great Job And To The Point,Thank You
You're Welcome! Glad it helped
EXCELLENT! Thanks for presenting!
You're Welcome!
Thanks!
You're Welcome!
You saved me $50 vs at dealership.
Nice!
Awesome! Thanks for the video.
You're Welcome!
That was very helpful
Glad it helped!
Good guy helped me out watching video AAA+++
Glad it helped!
Great, specific , guidance
Ty
You're Welcome!
Excellent video....thank you for posting!
You're Welcome!
Great video very helpful
Thanks!
Very Helpful, thank you.
You're welcome!
quick to the point, nice video
Thanks!
Very helpful! Thank You!
You're Welcome! Glad it helped
Great video nice simple to the point!
Thanks!
great video, thanks for the effort to help others.
Thanks! Glad it helped!
Great tutorial.
Thank you!
Thanks! That helped tremendously.
Glad it helped!
Great video!
Thanks!
Thank you man
You're welcome!
Very helpful
Glad it helped!
VERY HELPFUl.. THANK YOU!
You're welcome!
Thanks man! Good video. No bullshit, right to the point.
You're Welcome!
Perfect! Thank you
You're welcome!
Very helpful...thanks!
You're welcome!
Thanks so much for this!
You're welcome!
Thanks dude!
You're Welcome!
nice job.keep it simple
Thanks
great video
Thanks!
Thank you for your help!
You're Welcome!
@@PYR-Auto that help me so much! Did the job in about 5 min if I didn’t have your video it would of taken me at least 30 min sooooooo again thanks so much 🙏
Glad it helped!
thanks for the video
You're welcome
Very helpful!!!
Great!
I have a question how did you become the man you are today because I am try to achieve that level in life👈👍✌
Thank you
You're welcome!
Great video Thanks
You're Welcome!
Great video thank you
You're Welcome!
One would think that Ford would make it as at least as hard as Honda does, to change the cabin air filter.
I need to start doing this myself. Can you give a typical price for one of these filters if ordering online?
I would say somewhere around $15 - depending on how nice of one you want. If you are trying to get rid of any odors I would recommend spending a little bit more to get a charcoal or carbon activated filter
One of my clips is messed up or something, having trouble getting glove box to latch after installing new filter.
Seriously? Yea it's pretty easy but it's a damn filter. Whatever happened to putting them right under the hood where it took two seconds. Thanks for the video man!
Yeah, they certainly could make them a little more accessible
Why use 2 copper colored 7mm screws to hold that trim piece on?
Thank you 🙏
ou're Welcome!
Pleased to find this video. My 2012 f-250 required the dash to be removed. I would love to have been able to post the picture of what the coil looked like after 5 years of hauling a long haired GSD around in this truck.
I can only imagine!
We have 2013 F250s at work, both of them are clogged up with dirt and don’t blow air, we replaced one condesor for 1300$ and they don’t want to do the other one.. I feel bad for the guy in that truck
Thanks
You're Welcome!
Thank you! I would think this would be easier for the customer to do himself! “It’s all a conspiracy man”
Might be!
Nice video
Thanks!
Thanks man. Couldn't figure out if I just needed to set my purse down to pop out the last part of the dash trim to get to the filter door. Apparently so!
You're Welcome! It does come off pretty hard, especially if it hasn't been removed often