I remember when you could pop the hood, remove 2 screws from each headlamp cover, then have easy access to the headlamp housing. You end up spending more time fudging with the bumper than with the darn headlight!! Joe Biden says "C'mon man."
The people talking in the background are really annoying. But this is the only video on UA-cam that shows how to change a headlight assembly and it's helpful.
Hello period thank you your video is very helpful period unfortunately my lights seem like they are angled the wrong direction once reassembling everything
Great video. Had a cracked lens on the front of my CX five. Saved a lot of money replacing both lenses myself. Never could’ve done it without seeing how it was done. Thanks a lot for the video,Repair guy.
most car right now had this kind of design where there always 1 bolt at the bottom of the headlight assembly and u had no choice than to lower down ur bumper
Hi kabayan! I’ve changed my whole headlight due to it being damaged but the Adaptive light malfunction came on the dashboard, is there any recommendations you can give to sort it out? Salamat kabayan
The work involved here to change a headlight assembly is nothing short of ridiculous! Makes me hate my 2015 Mazda CX-5 even more than I did minutes ago. I’ve had other cars where this could be done in 15 minutes from start to finish.
For anyone wondering, it is possible to replace the headlight w/o removing anything. I did it today. It was a tight squeeze and an awkward angle. Also I have long scrawny arms and long skinny fingers. Anyone with huge arms or beastly hands prob wont be able to fit in there. It took 10 mins total with me struggling to get out bulb originally for 5 mins. Figd it was the angle but I tried the other headlight and popped it out in 10 seconds. If it was that side it would have been about a 5 min fix.
@@asianmechanicguy6483 Oh yeah I didnt realize you were doing the whole headlight assembly replacement. My car manual still was telling me I had to remove a bunch of bolts just for a bulb. Im lazy and was like heck no! Good work. Guy :)
Remember when you could just install a light fixture without having to do this? Pepperidge Farms does.
Remove 739 fasteners, simply replace bulb, put back in 500 fasteners because you lost a lot of them. Got it!
You only need to take the fasteners on the front lip and the 4 or so going into the wheel well. Pop the trim and you’ll have access to the bolts.
its my first time when i did this so i did of what i know
I get to do this tomorrow, so damn excited.....not. Thank you for the easier way though.
Nothing quite like a Mazda car requiring you to take out everything just to get at one thing.
so true
Agreed! Mine will be up for sale soon.
Nababaklas po ba yan sir yung headlight?hindi ba sya permaseal?
I remember when you could pop the hood, remove 2 screws from each headlamp cover, then have easy access to the headlamp housing.
You end up spending more time fudging with the bumper than with the darn headlight!!
Joe Biden says "C'mon man."
there are 2 screw underneath the headlight u have to lower down the bumper to get access on it ..its easy to see but its hard to do it trust me
I appreciate your video. I've got water in my cx-3 headlight assemblies and needed a preview of how getting them out is done. So, thank you!
Glad it helped
The people talking in the background are really annoying. But this is the only video on UA-cam that shows how to change a headlight assembly and it's helpful.
Hello period thank you your video is very helpful period unfortunately my lights seem like they are angled the wrong direction once reassembling everything
Great video. Had a cracked lens on the front of my CX five. Saved a lot of money replacing both lenses myself. Never could’ve done it without seeing how it was done. Thanks a lot for the video,Repair guy.
Glad it helped!
Ay apo' awan tayon😊
Oh hell no, too much work
leave to me ill do it hehe
Y no mostraste como pusiste la ampolleta...😮😢 Tanto video....mejor ponle al vídeo como sacar el foco
Never ever again japanese trash car
most car right now had this kind of design where there always 1 bolt at the bottom of the headlight assembly and u had no choice than to lower down ur bumper
Ay apo; wen ngarod
Instead of headlight replacement its a transmission replacement guide.
how
Was this the left or right headlamp assembly? I'm not sure if reference is from the drivers seat or looking at the front of the car.
front left if ur sitting in the car
Hi kabayan! I’ve changed my whole headlight due to it being damaged but the Adaptive light malfunction came on the dashboard, is there any recommendations you can give to sort it out? Salamat kabayan
search mo bro sa google minsan kc kailangan lang yan ng adjustment sa settings ng car
The work involved here to change a headlight assembly is nothing short of ridiculous! Makes me hate my 2015 Mazda CX-5 even more than I did minutes ago. I’ve had other cars where this could be done in 15 minutes from start to finish.
i totally agree ..
Can the bulbs be changed in them with grey sockets
i think so
Crazy stuff. I see some dust on the inside of my headlight, and was thinking of trying to clean it. Guess not :)
Go for it!..u can do it
VANCOUVER
Kmusta?
ok naman kabayan kumusta rin
@@asianmechanicguy6483 magaling ako
For anyone wondering, it is possible to replace the headlight w/o removing anything. I did it today. It was a tight squeeze and an awkward angle. Also I have long scrawny arms and long skinny fingers. Anyone with huge arms or beastly hands prob wont be able to fit in there. It took 10 mins total with me struggling to get out bulb originally for 5 mins. Figd it was the angle but I tried the other headlight and popped it out in 10 seconds. If it was that side it would have been about a 5 min fix.
I did replace the headlight here not the bulb there were 2 bolts behind the bumper so u need to lower down a little bit the bumper
@@asianmechanicguy6483 Oh yeah I didnt realize you were doing the whole headlight assembly replacement. My car manual still was telling me I had to remove a bunch of bolts just for a bulb. Im lazy and was like heck no! Good work. Guy :)
Wow! I just changed lightbulb in 2016 CX-5 without tools in under 5 minutes! Just reach in under hood; twist out old one; replace; twist in new one!
Good for you this video is headlight assembly replacement not the bulb
His whole clear plastic was messed up, mine is the same. Hit a bird and it is cracked and now full of condensation.
Alot of the gt mazda cx5 you can't replace the bulb. You need to replace the whole assembly