DATSUN Z. R200 DIFFERENTIAL - DRIVE SHAFT AND STUB AXEL MODIFICATION. 240Z 260Z 280Z
Вставка
- Опубліковано 10 вер 2024
- Hey Z Heads.
Continuing on from the R200 swap out episode, now we get to adapting the drive shaft stub axles and modifying the drive shafts. We also recondition the shafts while we are at it..
It's a big episode so I hope you enjoy it.
Also apologies for the focus glitching out at some stages in the video!
--------------------------------------------------
Aries Beats - 80s Synthwave Retro Pop Wave Music
Producer and Composer (Royalty free)
UA-cam Channel - / ariesbeats
------------------------
240z left hand to right hand conversion
240z left hand drive to right hand drive conversion
240z lhd to rhd conversion
240z converted to right hand drive
240z converted to RHD
240z body work
240z welding
240z repairs
240z UK
240z Ireland
Z Heads
260z left hand to right hand conversion
260z left hand drive to right hand drive conversion
260z lhd to rhd conversion
260z converted to right hand drive
260z converted to RHD
260z body work
260z welding
260z repairs
260z UK
260z Ireland
Z Heads
280z left hand to right hand conversion
280z left hand drive to right hand drive conversion
280z lhd to rhd conversion
280z converted to right hand drive
280z converted to RHD
280z body work
280z welding
280z repairs
280z UK
280z Ireland
Love the work. Can't wait to see the finished product. As an owner of a fully restored 71 240Z in Dublin let me know if you need some references or anything.
Thanks a mil Kevin. Always good to know there is some assistance close by!
Nice work. Always good to see when mistakes are made & corrected, rather than edited out. Oetiker type clamps can be squeezed with angle/diagonal cutting pliers, better than using vise grips as you get the proper tuck in of the clamp head
Cheers. Yea I want to show the process including the screw ups 😁. And you are right about the clamps. I had a suitable pinchers but couldn't find it on the day.
it was a long time ago but back when i started repeatedly blowing z rearend by over powering them i just threw a 300zx diff in which i remember only taking a couple hours and some hard pushing but I never blew another diff, tranny's that's another story but a zx 5 speed fixed that problem too, i just don't remember anything coming up that wasn't handled in an afternoon.....
Love it. Was it a Z31 300zx?
Another great video mate, watching this rain in Hawkes Bay New Zealand, we. Puked do without it after cyclone. I need it to stop so I can roll mine outside to carry on m, keep up the great work 🎉🎉
Yeah I saw ye guys were having it tough over there. Some scary videos over the last week or so. Hope things cheers up soon and you get the Z out and about.
Nice progress! I fitted CV shafts to my Z and had similar clearance issues on the anti roll bar link. I fitted new links from a honda crx which were shorter and allowed clearance. Nice and cheap too!
I'm glad to hear I'm not the only one with the drop link issue. Cheers for the CRX advice. I'll order a set ASAP and eliminate any risk to the booths. 😁
Good morning from New Zealand. Great to see again 😊
Hey cheers. Nearly got down yer direction a few weeks back for a break. If we had more than a 2 week break we would have been there.
Now get a coffee 🙃
The man can weld!
Nice to see you back again. The round flange at around 26.40 is also too close to the damper boss....or is it the camera angle.
Looks close with the camera angle, but there is space behind for bolts, so all should be good