Basic Reed Adjustments for Overblows - How to start overblowing
Вставка
- Опубліковано 16 лип 2024
- In this harmonica lesson, I will show you how to do basic reed adjustments on harmonica to help with overblowing. DISCLAIMER - you may damage your harmonica so I suggest practicing on one you don't care about.
🔥 Click here for more info on reed adjustments - tomlinharmonicalessons.com/bas...
❤️ Enjoyed this video? Subscribe to our channel and hit the notification bell to never miss a new video!
-------------------------
TIMESTAMPS
0:06 Basic Reed Adjustments for Overblows
0:20 Disclaimer: Don't Practice This on Your Brand-New Harmonica
0:57 Custom Harps From Andrew Zajac and Sugar Cain
1:20 Take the Cover Plates Off
1:41 Do a Little Play Test
2:31 Make the Gaps Little Bit Tighter
3:04 Use French Tuner to Test
6:04 Putting the Comb Back
7:09 Click Link in Description Below for Andrew's Videos
Introduction to Improvisation eCourse - tomlinharmonicaschool.com/p/i...
-------------------------
🔥 JOIN OUR HARMONICA SCHOOL & COMMUNITY
If you are committed to taking the next step and improving your harmonica playing check out my online harmonica school where you can get EVERYTHING you need to become a great harmonica player! tomlinharmonicaschool.com
-------------------------
STAY CONNECTED! 🔗
👋 Follow me on Facebook: / tomlinharmonicalessons
👋 Follow me on Instagram: / tomlinharmonicalessons ► Tomlin's Free Blues Harmonica Toolkit tomlinharmonicaschool.com/p/b... ► Tomlin's Free Blues Harmonica Toolkit tomlinharmonicaschool.com/p/b...
✏ Get your FREE harmonica tab PDF and audio clips here 👉 foxly.link/f5gidD
The more I watch and play harmonica, the more I realize how much I do not know. Thank you very much that you share these tips with us and try to learn us! You are great man! Wish you all the best from Serbia!
+Pedja Molder72 it's my pleasure :-)
I had no idea Macaulay Culkin played harp, let alone gave lessons.
was going to say the exact same thing haha
Hi Tomlin! I've been working with harps in a rack as part of my singer/songwriter gig for over 30 years, so I'm not new but I am getting more serious about my harp playing.
Your vids are really helping a lot (just about to order a french tuner and basic tool kit from Andrew). Thanks for everything you're posting...I'll be watching. All the best!
Good instructor - direct & no waffle. Cheers,
This video is great. I've only been able to hit overblows on the 6th hole... After watching this video- for some reason- the 4 and 5 overblows started jumping out for me! Haven't even adjusted a reed yet... But this video brought the mojo
Thank you very much
For the video
greetings from Germany
+Wanderer x my pleasure :-)
Well explained
+John McKevitt thanks John :-)
merci beaucoup
Great tips mate :)
+LearnTheHarmonica.com cheers buddy :-)
Liam, same question above applies to your lessons too :)
Btw I watch both of yours channels on regular basis. Cheers!
Love the joking loving banter between the two greatest harp lesson guys on the tube.
Tom, any chance you make a same video about overdraws? I l looked all over YT and didn't find a detail video on adjusting reed (7) for overdraw and precise technique behind it on how to hit it right without getting the major 3 before?
Nice G-Shock case you got there to hold the screws 😅
Hi Tomlin, you’ve been really helpful while I’ve been learning harmonica. I just wanted to ask, do I have to adjust the reeds on my harmonica in order to overblow or can it be done without?
Hello, do the blade spacing settings affect the accuracy of the notes? should I tune the Harmonica after adjusting the blades? Thank you so much!
Hello Tomlin, I'm not sure I want to start doing surgery on my harps. Is it really necessary? Are my two choices really: Do it myself or Buy a custom harp?
Thanks,
Don Coppock.
Is there a particular gap measurement you want to look for? Some of my draw bends (3,1) don’t quite get to the lowest note with the bends. 3 also sounds choked off to.
Do you do draws the same way to make the draw bends sound better if you’re having an issue with them? I can get nice clear draw bends on my F harp but my C sounds choked off on a couple holes as I mentioned.
Thanks
,,, Super!!!,,, Gracias very very very much!!!,,,
Greetings from Brazil Tomlin! Let me ask you something, I've just started learning to overblow, and I'm watching a lot of videos about ajusting the harmonica. When you customize your harmonicas you just ajust the reed decreasing the gap or do you do the embossing/waxing? thanks in advanced.
+LeoBrazil89 hiya I just upgrade the comb and decrease the gap :-)
Do you have any tips when you overblow and the harmonica are "squealing", it usually happens on holes 4 and 5.
I’m confused do you increase or decrease the gas in the blow read to get overblow’s?
Tom.. it sounded like you were on the 3 hole blow on the C harp.. hmm no???? at 6:35?
Great vid. Thanks. Hey I ruined my harp....you, you..... Joke! Seriously I wrecked a few. Used old ones though. What basically is that french tuner tool you got from Andrew? What does it allow you to do? You know where I can pick one up in the states? Wanna let you know how much I appreciate your lessons. You are a mad good harp player as well.
Hi.. gonna put some of your technical know how to good use... Question: I have discovered that Golden Melodies are not very responsive to overblowing -- for years I have had, regarding overblows, no problem with out-of-the-box quality MB type harps. Can I use the info in this video to tweak my Golden Melodies to overblow worthiness? -- (at my own risk, of course).
+Carl J. Weber hi Carl, absolutely. In fact a lot of people prefer GMs for overblowing. Good luck :-)
Hi and thanks Tomlin. Here's a paper I wrote you might like. harmonicanavigation.com/harmonicaPhonetics/index.html#p=1
What was that tool to test it while reeds are out?
It is a French Tuner by Andrew Zajac
I finally got my first overblow! Only problem is I wasn't trying to, I just suck
Es el de mi pobre angelito
Is that a lee oskar?
it's suzuki olive. it was said in the begining
And....in french ???
I can't see Stevie Wonder ever having to have carried this out. Does that mean every harmonica manufactured now is a pile of shite like everything else these days? lol
+Lee Sanderson hi Lee, not at all. Stevie Wonder plays a chromatic harmonica where you push a button on the side to get the extra notes. On a diatonic harmonica you need to bend and overblow to get those extra notes. This requires a specific set up.
***** It's a chromatic harmonica I got for christmas expecting to get the note bending by pressing the button but all the button does is transpose the whole key set from C to C#. No note bending and I've spent hours trying believe me. Beginning to think it "does" have to be set up some way especially to get rid of the annoying dual notes you get. Just want to play one note but I always get 2 and it sounds like an accordian when I draw or blow. Still tryin to work out how to stop that as well. lol
Lee Sanderson you can't bend on 90% of chromatic harmonicas unless you remove the valves. Stevie never bended as best as I've been able to transcribe. But he would anticipate a lot of pitches one half step lower so the 'bend' was him engaging or disengaging the slide something like a 16th note ahead of the beat producing a mock 'bend'.
Technically any two reeds will have a bend as long as one is higher pitch than the other.. on a chromatic in 'solo' tuning none of the reeds are more than a whole step apart so you can never get more than a half step bend, and they're all draw bends. At least that's how it seems to work on my cheap Easttop 10 hole chromatic