Looks great!! As a mason by trade and someone who makes mortar counter tops for fun, id suggest for your next one using some intergral color, or color hardener and a basic slate stamp mat to imprint and give a natural stone look.. I'd use a charcoal antique release on the stamp mat to give it shading..and spray or wipe those particle board forms with old engine oil so they come off easier
Thanks a lot Tyler, I'm imagining how it could come following your advice and I really like it! Surely for the next sink I'll try to do as you say, especially with regard to the release agent
The BEST concrete sink video - the drain cutout from aerosol spray can is brilliant, and concrete reinforcement is all about craftsmanship - well done mate! Thank you SO MUCH for sharing your knowledge! NEW SUB 🙏🏻
Thanks a lot! I can tell you that it works, but you're right, now I'll look for a way to upload photos or a video to show you how it was placed in the bathroom :)
Muito obrigado Maria! Estou feliz por ter sido uma inspiração :) para torná-lo impermeável, usei uma cartilha para concreto. Vou deixar o link do produto www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
Liquid soap with watter spray to break surface tention on separator, and avoid bubbles, easier release. Vibration is crucial, use a vibrating grinder for example. Isnt it very heavy?
I want to make this soo bad! I'm wondering if you can share the directions and/or the items that you used. Thanks for any help you can share! The Google drive link didn't work for me. Good Day! Christine
I'm already doing concrete counter tops might as well go with the concrete sink! its either this or a $300+ apron sink... Beauty of doing a concrete sink is; if your willing to put in the "elbow grease" you custom make the sink to your desired dimensions and not be limited to whatever they sell in metal! ... great job I hope mine ends up half as good as yours.
First of all thank you for the comment. Certainly it takes a lot of work to make a sink like this, but once finished it becomes a nice piece of furniture for your home. I'd be glad to check out some pictures of your sink, once you've finished it! Please send me a link!
Если бы использовал вибратор, пузырей на лицевой поверхности было бы меньше, а может вообще избежал бы пустот. Идея хорошая, кстати. Попробую себе также сделать.
Разумеется, с вибрацией я бы получил лучший результат. В следующий раз я сделаю это. В любом случае, спасибо! Если вы сделаете что-то интересное, загрузите фотографию под этими комментариями
I just did my first concrete sink and I did not vibrate enough and have just a few air bibles in it. Can you tell me what you did to fill them up? Was it just the concrete mix or mortar mix or something you came up with. Thanks...my video will be posting soon but it looks nothing like yours.
That's an awesome project! I made my first project with concrete last month and it was fun, i should try to make my own sink! Thanks for sharing this video with us!! 😄
Hi.. awesome work on the sink and the result looked very nice.. I especially like the end picture with the wood stand... thanks for sharing the video..
Gracias por el consejo, lo tendré en cuenta para el próximo trabajo. También porque para este fregadero ya he usado un sellador de concreto, y debo decir que por ahora estoy muy satisfecho
¡Me alegra que te haya gustado! El producto utilizado es un sellador de hormigón, les dejo el enlace del producto. www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
Nobody does the old school way of getting the airbubbles out? Just move a little bit around through the conrete with a stick and shake it up a little bit, then you have all the air out
Since it was the first time I used the cement I was informed about how to eliminate the bubbles .. I found several indications, including the one I used in the video (tap against the formwork), but I did not find anything about the technique that you say. Surely I can try it for the next project, thanks for the info!
You did not put enough time in vibrating your concrete mix, the more time you put into vibrating the better the out come of the cast.. Yes a stick pushed into the mix, a orbital sander to vibrate the side, a hammer to knock on the frame.. The longer the time you put in to vibrate and removing the bubbles, the smoother you could of gotten the surface. Also adding a bonding liqaud nto the concrete which would make it water proof from the word go..
No se como querem um link, si no habas del material usados y as medidas, nen todas las personas tienes esta percepción de imaginar los materiales, principal los químicos que ha usados!😏 El resultado es maravilloso, más no enciaron nada!😟
GOOD JOB THERE. I would recommend applying only cement mixture using a 2 inch brush to seal off the air spaces then let it dry for a day, then you can sand it with ease. Anyway well done.
What you describe is quite the procedure I did. The only problem was that the layer of cement added after it was not perfectly welded to the first one, which led to the fact that in the sanding phase the last layer was slightly ruined.
es un arte este trabajo hecho c toda la mano de alguien que quiere hacer las cosas bien no como los comerciales que venden ahora todos frágiles apenas t recargas y se dañan
I can't understand if you are referring to the stains that form in the sink or outside the sink .. However in the sink they do not form thanks to the concrete sealer that I applied, and the drops of water do not come out of the sink because it is large enough to avoid it.
Nice Job, end result is awesome. Would have been good to save the template. (And ship it to me). Just made a hearth and mantle, so I know how much sweat goes into this. Labor of love. Next time maybe use GFRC instead of the rebar. You can get the concrete down to less than 0.5" thick. Your basin must have neen heavy, but I guess you only need to move it once.
Thank you! Surely using GFRC I could have made it thinner. It is a material that I will take into account for future projects. I broke the template when I pulled out the sink, but if you want I can send you the 3D model file
Thanks that would be great! kieranjack2015atgmaildotcom. 3D modeling good idea definitely way to go and something I did not think of. This was my mantel and hearth if you're interested. Skip to 4.20. ua-cam.com/video/2oNDxtMwRBc/v-deo.html
That was a big mistake. It took me a very long time to remove all the formwork. And I decided not to record that part because of inappropriate language 😂
@@zachp7603 he had to be because this video would have been better with captions or a voice. BUT AT LEAST I NOTICED HE USED AN AGENT TO BUILD THE SLOPE
Me ha gustado mucho tu trabajo, precisamente estamos planeando hacer uno un poco más grande para usarlo en nuestro jardín así que si es posible me gustaría saber qué elementos has usado. Saludos y felicidades por el trabajo
Hola Ramón, ¡gracias por el comentario! Para realizarlo utilicé hormigón puro, una malla de acero (si fuera hierro sería mejor), madera para hacer el encofrado y un imprengante del que os dejo el enlace. En mi opinión, las cosas a las que debes prestar atención son: - evalúe bien el grosor para asegurarse de que aguanta pero no se vuelve excesivamente pesado (en mi opinión, si utiliza la malla de hierro, puede mantenerlo con seguridad en un grosor de pared de 30 35 mm) - al realizar el encofrado, tenga cuidado de dejar la pendiente para drenar el agua. Me ha dejado bastante pero cada vez que lo uso me digo a mí mismo que aunque me quedara más estaría mejor; - Tenga cuidado al realizar el encofrado de utilizar desmoldante de silicona para retirarlo cuando el hormigón esté seco, de lo contrario será extremadamente difícil. ¡Buena suerte en tu trabajo!
Very nicely done. I'm exploring a concrete countertop, sink and splashboard, cast in place as one piece. A little nervous though, haven't seen one on youtube, so far...
Thanks so much! Even I would be a little worried about doing everything in one piece. You have to pay attention to more problems you may incur. For example, you need to make sure you can make the cement fast enough, to make sure that you mix everything well. But if you can, it will surely be a good job If you want, publish here below the photos of your finished countertop!
Thank you! I appreciate the fact that you have noticed that some tools that I used belonged to my grandfather .. They have been built long lasting and in fact they still work
Looks cool but in reality concrete sinks are not practical for every day use especially in a domestic kitchen. They very quickly become filthy even with regular cleaning. I've got one so I know.
Thanks for the advice, but consider that I built it for a house in the mountains .. so it will not be used daily. Now it is about a year that is mounted and I have not yet encountered problems
colin smith I have done a slate tile surrounding in my bathtub and knowing the issues with soap and other residues I sealed the whole thing with 5layers of concrete/stone sealer. Been 4yrs since and it’s smooth and clean like day 1
Bellissimo il lavoro, vorrei provare a replicarlo in modo da metterlo all'esterno del mio giardino, solo che ad occhio per me lo farei più profondo. Mi diresti le misure che hai utilizzato tu? e lo spessore, io avrei pensato di farlo spesso 3 cm. secondo te va bene? in fine un'ultima domanda che diametro ha il tubo che hai tagliato per realizzare il foro di scolo acqua? grazie mielle
Ciao Stefano, le misure le trovi nella descrizione del video. Secondo me 3 cm dovrebbero andare bene, io avevo fatto 5 ma era troppo.. Il diametro dipende dalla piletta di scarico che vuoi utilizzare
A eso se dedican verdad mis buenos porque acomo estoy observando todo ala medida muy bien hecho excelente trabajo de verdad te felicito saludos desde México...😁
Mmm, I don't know .. I'm still struggling on the thing. In fact without music you would hear the background sounds better and certainly would be easier in video editing. But I like to hear some music while the pictures are running. You think it would be best of all without music?
Monarca It depends on the production. There are many Japanese videos, for example, with only the ambient sound. I also like to hear sound during the videos but, especially when you want to teach something, the music should be secondary. In the case of this video the music is too "loud" and get more attention than the images. For me it was so annoying that I turned the sound off and the video got boring for that. But your intention was great and the video is useful. 🙂
I tried to notice the use of music in other videos similar to mine. An idea could be to make the music feel only in the points where I show what I did, and leave the moments in which I work without music. What do you say?
Excellent question, that product is a primer for concrete. It is used to penetrate the holes in the concrete and make it waterproof. I have never heard of it being used on walls, but I know for sure that they use it for concrete floors before coloring them. Try to find out more, this is the product link www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
Причем полностью не затвердел ,впитывает сильно воду 28 дней надо ждать так-то ,никаких присадок нет хоть фибру бы кинул ,да и смеситель для наполнения ванной нифига поставил .
Конечно, на самом деле, когда я заканчиваю работать, я всегда пылесось. Мне действительно нужна вакуумная система, но моя комната слишком мала, чтобы содержать одну
Un trabajo excelente no bueno ni muy bueno ni mazizo es excelente y eso se logra cuando aportas un exceso de esfuerzo pero habla Muy bien de ti. Las matemáticas que manejas los cálculos de las dimensiones todo el emparrillado de la maya metálica todo excelente
Obrigado, estou feliz por ter sido sua inspiração. No entanto, a idéia de unir poliestireno com cimento é excelente, basta deixar uma camada de cimento puro do lado de fora da pia, com pelo menos meio centímetro de espessura (para evitar quebras nos locais onde mais poliestireno permanece).
Ciao, ho usato solo cemento, per avere una finitura più omogenea. Ma se guardi solo il livello strutturale direi che puoi aggiungere anche della sabbia senza avere problemi
Nice job, but you should have cut the steel cage to sit higher during the pour (lower in the actual sink). As reinforcement always needs to sit lower in the bottom of concrete to provide maximum support.
Thank you very much Luiz! You are right, actually I cut the cage so because I was afraid that during the polishing of the cement I would come up to the iron of the cage
Me suscribi y like me encantó el trabajo ojalá pueda hacerlo y me quedé un poco parecido , una pregunta que tipo de disco es y como se llama porque ví que lo regileteaste mucho para darle.un acabo mejor me imagino .. gracias por compartir y saludos ..
Muchas gracias a ti Fernando, ¡estoy muy feliz de que hayas disfrutado el video! Te dejo el enlace de los discos que utilicé ( www.amazon.com/WORKPRO-20-pack-Zirconia-Abrasive-Grinding/dp/B07M6XN561/ref=sr_1_4?crid=2DBF620NCL3QR&keywords=disk+for+angle+grinder&qid=1574679407&sprefix=disk+for+an%2Caps%2C221&sr=8-4 ) Tenga en cuenta que los discos de diamante generalmente se usan para pulir cemento, pero como el fregadero ya era lo suficientemente suave, quería probar directamente con los discos abrasivos. En caso de que tengas otras dudas, ¡no dudes en escribirme! saludos
Ciao, lavoro fatto a regola d'arte! Il mio dubbio è: "Questo sigillante è resistente tanto da sopportare l'uso quotidiano in cucina? Quindi con saponi, olio, detergenti vari etc?" Grazie ancora un saluto.
props for not using any cordless tools. my own suggestion would be to use 100 grit diamond hand pads to do the interior polish. WET, no dust and nice even finish. also, in general. wet polishing is the way to go. Nice sink
Looks great!! As a mason by trade and someone who makes mortar counter tops for fun, id suggest for your next one using some intergral color, or color hardener and a basic slate stamp mat to imprint and give a natural stone look.. I'd use a charcoal antique release on the stamp mat to give it shading..and spray or wipe those particle board forms with old engine oil so they come off easier
Thanks a lot Tyler, I'm imagining how it could come following your advice and I really like it! Surely for the next sink I'll try to do as you say, especially with regard to the release agent
The BEST concrete sink video - the drain cutout from aerosol spray can is brilliant, and concrete reinforcement is all about craftsmanship - well done mate! Thank you SO MUCH for sharing your knowledge! NEW SUB 🙏🏻
Can you give us an update on how it’s working and how it looks now. Love your video.
Thanks a lot! I can tell you that it works, but you're right, now I'll look for a way to upload photos or a video to show you how it was placed in the bathroom :)
Depois de pronto, o que você usou para impermeabilização
ficou muito lindo e bem feito! parabéns!!! vou fazer nos meus banheiros😍 👏👏👏👏
Muito obrigado Maria! Estou feliz por ter sido uma inspiração :) para torná-lo impermeável, usei uma cartilha para concreto. Vou deixar o link do produto www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
Зачем я это увидел... Теперь хочется попробовать сделать самому) Классно бы её ещё и эмалью покрыть
Я рад, что видео послужило вдохновением! Если вы хотите, когда вы построили раковину, пришлите мне фотографии, которые я хотел бы видеть :)
Liquid soap with watter spray to break surface tention on separator, and avoid bubbles, easier release. Vibration is crucial, use a vibrating grinder for example. Isnt it very heavy?
I wish I could work that fast I could get so much done I a day .. great job
Haha you're not the first to tell me ..
Thank you!
Very nice tap you have chosen for the sink. Fits perfectly with the style
Thanks a lot! You have a good eye for noticing a similar detail
Nice job, there are two kinds of people those that wised they could do it and those that do it.
You are right! Thanks a lot :)
Hello.
professional work, congratulations.
what material do you use to make it waterproof?
Thanks
Incredible work! Can you tell me what products you used? Going to do one for my kitchen.
Que bonita quedo saludos amigo desde aquí costa Rica 🇨🇷👍😄🤗🤗☺️☺️
I love diy projects. you made that look easy. great job
Thanks so much! I'm glad there are people who appreciate my work
I want to make this soo bad! I'm wondering if you can share the directions and/or the items that you used. Thanks for any help you can share! The Google drive link didn't work for me. Good Day! Christine
Looks great. Copper tap and accessories would look amazing with the concrete!
Thanks a lot! You're right, copper and cement would make a good impression together! I will keep this in mind for the next project
muito top!
Excelente trabajo amigo... Gracias por enseñar tus conocimientos
Gracias a ti Me alegra que hayas disfrutado mi video
Great work out there. Will be adding this video for references on concrete sinks.
Thank you so much Leif, I am very pleased!
I'm already doing concrete counter tops might as well go with the concrete sink! its either this or a $300+ apron sink... Beauty of doing a concrete sink is; if your willing to put in the "elbow grease" you custom make the sink to your desired dimensions and not be limited to whatever they sell in metal! ... great job I hope mine ends up half as good as yours.
First of all thank you for the comment. Certainly it takes a lot of work to make a sink like this, but once finished it becomes a nice piece of furniture for your home.
I'd be glad to check out some pictures of your sink, once you've finished it! Please send me a link!
Los Felicitó!!! Muy buen trabajo!!! Saludos desde Argentina
Muchas gracias @Maria Arias! Saludos a todos ustedes :)
La verdad precioso los felicito saludos desde México...😁
Muchas gracias por las lindas palabras! Reemplazo saludos!
Если бы использовал вибратор, пузырей на лицевой поверхности было бы меньше, а может вообще избежал бы пустот. Идея хорошая, кстати. Попробую себе также сделать.
Разумеется, с вибрацией я бы получил лучший результат. В следующий раз я сделаю это.
В любом случае, спасибо! Если вы сделаете что-то интересное, загрузите фотографию под этими комментариями
с пузырями даже лучше смотрится, лютый бетон. а как обстоят дела с смывом?, что то не видно уклона, она есть?
Теперь осталось сделать бетонный унитаз 😂😂😂😂😂
Monarca u speak everything, wow. Nice to see ur involved in the comment section. Anyway I like the sink, I like how thick it is, nice work
Не всё так просто и гладко,я имею ввиду раствор,если бы залил просто раствор из песка и цемента были бы сплошные пузыри и поры
I just did my first concrete sink and I did not vibrate enough and have just a few air bibles in it. Can you tell me what you did to fill them up? Was it just the concrete mix or mortar mix or something you came up with. Thanks...my video will be posting soon but it looks nothing like yours.
Resultado perfeito, projeto muito bem executado. Meus parabéns!
Muito obrigado! Estou muito satisfeito em ouvir suas palavras
One recommendation, if you use one of those long perforated waste for the shower. It’d look pretty cool
You're right, it's definitely a great idea! I'll keep it in mind for my next projects
I've got one of those (linear drain.) I'm here for ideas on how to execute the project.
Looks like it could get heavy. That will not dissuade me.
That's an awesome project! I made my first project with concrete last month and it was fun, i should try to make my own sink! Thanks for sharing this video with us!! 😄
Thank you for the support! If you want to share photos of your work with me upload them below in the comments :)
hola que precio tiene este lavabo de cemento ,en donde se encuentran?
envias a monterrey ,mexico
Hola, en realidad hice este fregadero para la casa de mi padre ... Pero puedo proporcionarte los dibujos técnicos, para que puedas hacerlo.
Beautiful . Fascinated by the finish you applied to bring out that rich luster in the concrete 👌
Thanks Carter, I'm glad you enjoyed it!
muito bom!
what is that finishing you applied? I love your work
Amazing job! I just wanted this video to have 930 comments 😁😁😂
Hi, please send me also a photo or video of how this sink looks in the bathroom. Great job, well done.
Se vee genial ¡¡¡¡¡¡
Es cemento con agua o agregaste algo más?
Solamente cemento con agua
Hi.. awesome work on the sink and the result looked very nice.. I especially like the end picture with the wood stand... thanks for sharing the video..
Thanks so much! It's comments like yours that make me want to make new videos
Great video ,I'm glad you use a respiratory mask
Thank you John, i'm glad you've enjoyed my video.. About the respiratory mask i know i have to upgrade mine, it will be one of the next step i'll do
Simplesmente maravilhoso, parabéns!
Muito obrigado, estou feliz que você tenha gostado do vídeo!
@@Monarca muito sucesso!
Good job. Please i need to know. Did you use crushed stone in the mix? What are the rate of mix?
it's just pure cement
Son muy lindos...recomiendo usar desmoldante,se evitan pulir demasiado.
Gracias por el consejo, lo tendré en cuenta para el próximo trabajo.
También porque para este fregadero ya he usado un sellador de concreto, y debo decir que por ahora estoy muy satisfecho
+Monarca Que bueno amigo me alegro mucho,trabajas muy bien.
¡Muchas gracias! Me alegro de que haya personas que aprecian mi trabajo ...
Espero poder grabar más videos pronto
Hola.muy lindo y trabajo!
Una consulta .Que líquido le aplicó al final ? Saludos
¡Me alegra que te haya gustado! El producto utilizado es un sellador de hormigón, les dejo el enlace del producto.
www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
2:45 to 2:48 "I told you and you don't understand! I need that sink right now!"
haha, she is my mother ... obviously she was pointing out to me something I had done wrong
😂
what you need you need rubber powder ef you need rubber powder cell whatsapp 009613972350 may nom eid al hajj
🤣😜
Класно пользуешься респиратором, молодец.
Nobody does the old school way of getting the airbubbles out? Just move a little bit around through the conrete with a stick and shake it up a little bit, then you have all the air out
Since it was the first time I used the cement I was informed about how to eliminate the bubbles .. I found several indications, including the one I used in the video (tap against the formwork), but I did not find anything about the technique that you say. Surely I can try it for the next project, thanks for the info!
You did not put enough time in vibrating your concrete mix, the more time you put into vibrating the better the out come of the cast..
Yes a stick pushed into the mix, a orbital sander to vibrate the side, a hammer to knock on the frame..
The longer the time you put in to vibrate and removing the bubbles, the smoother you could of gotten the surface.
Also adding a bonding liqaud nto the concrete which would make it water proof from the word go..
Para ficar perfeitamente liso, basta fazer uma mistura de cimento e água. Passar em tudo antes de jogar o concreto.
Me encantó quisiera saber qué es lo que le pasas con el pincel👍
Es sellador para cemento.
Is the blue spray at 4:40 what gets it to release from the mold? If so, what is it?
It was a silicone release spray, but it didn't work at all. For the next project I will use another brand
No se como querem um link, si no habas del material usados y as medidas, nen todas las personas tienes esta percepción de imaginar los materiales, principal los químicos que ha usados!😏
El resultado es maravilloso, más no enciaron nada!😟
Excellent job my friend
Concrete float?
No. Concrete sink.
perfeito!
Perfecto!
Lol!!!!
Concrete boats float,,
GOOD JOB THERE. I would recommend applying only cement mixture using a 2 inch brush to seal off the air spaces then let it dry for a day, then you can sand it with ease. Anyway well done.
What is the diameter of the drain hole
40 millimiters
What you describe is quite the procedure I did. The only problem was that the layer of cement added after it was not perfectly welded to the first one, which led to the fact that in the sanding phase the last layer was slightly ruined.
Disculpa,qué tipo de disco utilizas para pulir? Gracias por compartir,te quedó muy bien!!!
Muchas gracias por el aprecio! Utilicé los discos lamelares de 40 y 80 granos.
es un arte este trabajo hecho c toda la mano de alguien que quiere hacer las cosas bien
no como los comerciales que venden ahora todos frágiles apenas t recargas y se dañan
So how do stop stains from forming from every single thing you out down this sink?
I can't understand if you are referring to the stains that form in the sink or outside the sink .. However in the sink they do not form thanks to the concrete sealer that I applied, and the drops of water do not come out of the sink because it is large enough to avoid it.
Nice Job, end result is awesome. Would have been good to save the template. (And ship it to me). Just made a hearth and mantle, so I know how much sweat goes into this. Labor of love. Next time maybe use GFRC instead of the rebar. You can get the concrete down to less than 0.5" thick. Your basin must have neen heavy, but I guess you only need to move it once.
Thank you! Surely using GFRC I could have made it thinner. It is a material that I will take into account for future projects. I broke the template when I pulled out the sink, but if you want I can send you the 3D model file
Thanks that would be great! kieranjack2015atgmaildotcom. 3D modeling good idea definitely way to go and something I did not think of. This was my mantel and hearth if you're interested. Skip to 4.20. ua-cam.com/video/2oNDxtMwRBc/v-deo.html
Hello, i wanna try and make the sink, can i have the measurements of the template?
Hi, the measures of the finished sink are 45 * 55 * 15
nice 👍👍
Thank you so much!
Please wear a mask when mixing concrete. The dust is bad for your lungs.
Thank you for your interest. Next time I'll wear it for sure :)
Thanks lots
Hy
@@pramukkumat3482hi Pramuk
@Avid Reader Sensitive... ever heard of silicosis?
¡MUY BUEN TRABAJO!¡ ME ENCANTO LA BACHA DE CONCRETO QUE HICISTE!
Muchas gracias Mauro! Me alegra que hayas disfrutado mi trabajo
Why didnt you show how you had to bust the mold out in a million bits!
That was a big mistake. It took me a very long time to remove all the formwork. And I decided not to record that part because of inappropriate language 😂
Instead of metal mesh can it be of fiber glass?
Nice! What is the concrete mix ratio you use for this sink?
Thank you! I used 1 part of cement and 0,5 of sand, and some water. I think I've reached a grade of concrete mix about M35
The air bubbles.. You can fill them, but when you polish again, new ones are exposed. Have you found a solution to this? It's annoying.
I love it. Quick question.. did you have to put a slope towards the drain?
Thank you! Yes sure
How did you possibly miss the slope? You must be blind.
@@zachp7603 he had to be because this video would have been better with captions or a voice. BUT AT LEAST I NOTICED HE USED AN AGENT TO BUILD THE SLOPE
Me ha gustado mucho tu trabajo, precisamente estamos planeando hacer uno un poco más grande para usarlo en nuestro jardín así que si es posible me gustaría saber qué elementos has usado.
Saludos y felicidades por el trabajo
Hola Ramón, ¡gracias por el comentario! Para realizarlo utilicé hormigón puro, una malla de acero (si fuera hierro sería mejor), madera para hacer el encofrado y un imprengante del que os dejo el enlace. En mi opinión, las cosas a las que debes prestar atención son:
- evalúe bien el grosor para asegurarse de que aguanta pero no se vuelve excesivamente pesado (en mi opinión, si utiliza la malla de hierro, puede mantenerlo con seguridad en un grosor de pared de 30 35 mm)
- al realizar el encofrado, tenga cuidado de dejar la pendiente para drenar el agua. Me ha dejado bastante pero cada vez que lo uso me digo a mí mismo que aunque me quedara más estaría mejor;
- Tenga cuidado al realizar el encofrado de utilizar desmoldante de silicona para retirarlo cuando el hormigón esté seco, de lo contrario será extremadamente difícil.
¡Buena suerte en tu trabajo!
www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
Всю жизнь мечтал сделать такое, придётся делать
Попробуйте сами, если вам нужен более конкретный совет, дайте мне знать!
!!!
Fantastic 👋👋👋👍👍👍
Buenisimaaaa .Con que le pegas la perilla de desagote ...
muito bom.
Obrigado pá!
Sorry I didn't catch it, what was the (blue) release you used on the mold?
Leave em alone. The mask was protecting his chin
Very nicely done. I'm exploring a concrete countertop, sink and splashboard, cast in place as one piece. A little nervous though, haven't seen one on youtube, so far...
Thanks so much!
Even I would be a little worried about doing everything in one piece. You have to pay attention to more problems you may incur. For example, you need to make sure you can make the cement fast enough, to make sure that you mix everything well. But if you can, it will surely be a good job
If you want, publish here below the photos of your finished countertop!
What's the blue spray?
It's just an acrylic spray. I hoped it would work as a release agent but it did not work very well..
Nice job ! What’s the weight ?? Thx
Thank you, the weight is more or less 50 kg
The tools grandfather still work
Thank you! I appreciate the fact that you have noticed that some tools that I used belonged to my grandfather .. They have been built long lasting and in fact they still work
It looks too massive. And if we apply thinner-walled structures?
Hi Alex, you're right .. For safety I made some excessively thick walls. I'm sure you can get good strength even with 25mm thick walls
Looks cool but in reality concrete sinks are not practical for every day use especially in a domestic kitchen. They very quickly become filthy even with regular cleaning. I've got one so I know.
Thanks for the advice, but consider that I built it for a house in the mountains .. so it will not be used daily. Now it is about a year that is mounted and I have not yet encountered problems
@@Monarca thank you for your reply. Glad to hear your sink is not picking up stains. Looks really cool too.
colin smith I have done a slate tile surrounding in my bathtub and knowing the issues with soap and other residues I sealed the whole thing with 5layers of concrete/stone sealer. Been 4yrs since and it’s smooth and clean like day 1
@@pikubird that's good
Bellissimo il lavoro, vorrei provare a replicarlo in modo da metterlo all'esterno del mio giardino, solo che ad occhio per me lo farei più profondo. Mi diresti le misure che hai utilizzato tu? e lo spessore, io avrei pensato di farlo spesso 3 cm. secondo te va bene? in fine un'ultima domanda che diametro ha il tubo che hai tagliato per realizzare il foro di scolo acqua? grazie mielle
Ciao Stefano, le misure le trovi nella descrizione del video. Secondo me 3 cm dovrebbero andare bene, io avevo fatto 5 ma era troppo.. Il diametro dipende dalla piletta di scarico che vuoi utilizzare
SHOW!!!....congratulations \●/
That's nice of you, thank you!
what product did you use to seal it from moisture????
www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
That has to be a very heavy sink
Yes, it weighs almost 110 pounds .. in fact, putting it in place was quite tiring
@@Monarcathis would be a great application for light weight concrete
Buenazo
Saludos de Lima Perú👍👍👍
¡Me alegra que hayas disfrutado el video! Gracias por los saludos 🤗
Tap cost more than the sink.. 😂
Absolutely Frank! But at least I saved on the sink 😅
Maybe but the pride of make it your self is the he’s goal ,
A eso se dedican verdad mis buenos porque acomo estoy observando todo ala medida muy bien hecho excelente trabajo de verdad te felicito saludos desde México...😁
Come ti sei regolato per lasciare i fori della piletta per lo scarico
Nice job, but seriously, it doesn't need the song. 😖
Mmm, I don't know .. I'm still struggling on the thing. In fact without music you would hear the background sounds better and certainly would be easier in video editing. But I like to hear some music while the pictures are running.
You think it would be best of all without music?
Monarca It depends on the production. There are many Japanese videos, for example, with only the ambient sound. I also like to hear sound during the videos but, especially when you want to teach something, the music should be secondary. In the case of this video the music is too "loud" and get more attention than the images.
For me it was so annoying that I turned the sound off and the video got boring for that.
But your intention was great and the video is useful. 🙂
I tried to notice the use of music in other videos similar to mine. An idea could be to make the music feel only in the points where I show what I did, and leave the moments in which I work without music. What do you say?
Music was good. Those that don't like can hit the mute. Problem fixed!
Haha, that's the spirit!
What is that liquid you using from the yellow bucket??? Can it be applied on concrete walls before painting them??
Excellent question, that product is a primer for concrete. It is used to penetrate the holes in the concrete and make it waterproof. I have never heard of it being used on walls, but I know for sure that they use it for concrete floors before coloring them. Try to find out more, this is the product link
www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
Это чё за раствор цимент?
Это цементный герметик, это ссылка на продукт www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
Причем полностью не затвердел ,впитывает сильно воду 28 дней надо ждать так-то ,никаких присадок нет хоть фибру бы кинул ,да и смеситель для наполнения ванной нифига поставил .
Solo cemento o lleva arena ?
Пылесос вам сильно бы помог в работе, ребята.
Конечно, на самом деле, когда я заканчиваю работать, я всегда пылесось. Мне действительно нужна вакуумная система, но моя комната слишком мала, чтобы содержать одну
Muy buen trabajo! !Hermoso te quedó! !
Muchas gracias, me alegro de que te haya gustado!
What did you use for waterproofing it?
I've used a concrete sealer, this is the link of the product www.mapei.com/it/en/products-and-solutions/products/detail/primer-3296
Un trabajo excelente no bueno ni muy bueno ni mazizo es excelente y eso se logra cuando aportas un exceso de esfuerzo pero habla Muy bien de ti. Las matemáticas que manejas los cálculos de las dimensiones todo el emparrillado de la maya metálica todo excelente
Ficou muito vou fazer um, mais vou colocar isopor misturado no concreto para ficar mais leve👍
Muito bom😊😊😊
Obrigado, estou feliz por ter sido sua inspiração. No entanto, a idéia de unir poliestireno com cimento é excelente, basta deixar uma camada de cimento puro do lado de fora da pia, com pelo menos meio centímetro de espessura (para evitar quebras nos locais onde mais poliestireno permanece).
Why grinding inside...good idea..mice job
Thanks!
Ciao, nell'impasto hai utilizzato solo cemento e acqua? Oppure anche sabbia?
Ciao, ho usato solo cemento, per avere una finitura più omogenea. Ma se guardi solo il livello strutturale direi che puoi aggiungere anche della sabbia senza avere problemi
That looks great!!
Thanks, I'm glad you liked it!
Amazing ! Simple idea and great outcome. Keep going
Thanks so much!
Muy lindo y si la vas a comprar salen caras. Intentarè hacer una. Gracias
Gracias a ti por el comentario, me alegro de que lo hayas disfrutado y te haya inspirado para hacer uno. Sí, tienes razón, comprarlo sería muy caro
Nice job, but you should have cut the steel cage to sit higher during the pour (lower in the actual sink). As reinforcement always needs to sit lower in the bottom of concrete to provide maximum support.
Thank you very much Luiz! You are right, actually I cut the cage so because I was afraid that during the polishing of the cement I would come up to the iron of the cage
muito bom
Me suscribi y like me encantó el trabajo ojalá pueda hacerlo y me quedé un poco parecido , una pregunta que tipo de disco es y como se llama porque ví que lo regileteaste mucho para darle.un acabo mejor me imagino .. gracias por compartir y saludos ..
Muchas gracias a ti Fernando, ¡estoy muy feliz de que hayas disfrutado el video! Te dejo el enlace de los discos que utilicé ( www.amazon.com/WORKPRO-20-pack-Zirconia-Abrasive-Grinding/dp/B07M6XN561/ref=sr_1_4?crid=2DBF620NCL3QR&keywords=disk+for+angle+grinder&qid=1574679407&sprefix=disk+for+an%2Caps%2C221&sr=8-4 ) Tenga en cuenta que los discos de diamante generalmente se usan para pulir cemento, pero como el fregadero ya era lo suficientemente suave, quería probar directamente con los discos abrasivos.
En caso de que tengas otras dudas, ¡no dudes en escribirme! saludos
Ciao, lavoro fatto a regola d'arte! Il mio dubbio è: "Questo sigillante è resistente tanto da sopportare l'uso quotidiano in cucina? Quindi con saponi, olio, detergenti vari etc?" Grazie ancora un saluto.
Si tratta di un prodotto abbastanza valido. Potrebbe essere che nel tempo sia da rifare il trattamento
beautiful and cheap lol but is it very heavy ?
Thank you :) well no, it's like 50 kg
Qué fue lo último que le hizo con la brocha al cemento?
Apliqué un sellador de concreto, es un agente para impermeabilizar el concreto. Si mira la descripción del video, encontrará el enlace del producto.
What’s that white stuff you applied at 2:30? And why spray painted in blue?
That white stuff is whit cement or concrete sealer blue spray paint is probably rubber for not damaging the counter top
Tolles Video und schönes Ergebnis!👍
Vielen Dank, Kumpel!
props for not using any cordless tools. my own suggestion would be to use 100 grit diamond hand pads to do the interior polish. WET, no dust and nice even finish. also, in general. wet polishing is the way to go. Nice sink
Thanks so much! Excellent advice, for the next work with cement I will certainly do so .. Actually the dust was a big problem
да вы молодец, руки отличные у вас, раковина классная
Большое вам спасибо!