I have to tell you this is the best sink EVER. All MFG that make sinks make an indention at the drain inside the sink and it ALWAYS holds water and stains. You created a sink that seats the drain and with NO indention. I love it. I have 3 bathrooms. Woman 67 in Texas.
Very creative. Quick question for you: I have purchased a basin which looks like it’s constructed exactly like this with pieces of tiles glued together and the weight is quite heavy. As i am quite old school and used to one piece molded basins I’m a bit paranoid as to how durable the glue is that’s holding all these tiles together. And essentially the main bowl holding the water has lots of tile joints. Do these hold up well even if the bowl was full of water and in the long run?
Hello dear! Thank you! Yes it is very important the tile joints hold up the water and the sink do not leak. For this there is some process to glue the pieces between themselves. Check some important step: 1) after polishing it is important make a rough surface . In the video I have showed how to do this 2) before glue the tiles you need to eliminate all dust etc 3) to use PU sealant in all corners and tape for drywall with the glue to reinforce the pieces. Wish you to fabricate your sink with your ✋ 🤚
Hello! Thank you, I use the mix of polyester resin (with catalasator) + industrial talc. I know that in Europe exists special glue named General about 20 € for 1 kg. But you can also buy any mastic for fix and glue marbles and stones like Tenax ou Granit
@@Porcelanataria_45_grause eu achando que tu era gringo 😂. Parabéns pelo lindo trabalho ! Esse vídeo está maravilhoso com todos os detalhes. Me inscrevi e deixei meu curtir!
Hello dear! Thank you for the watching. The size of the sink is 60/42 cm, The high of the skirt is 12 cm, The high of inner walls of the hole is 11 cm, The hole about 40/26 cm, The backsplash of the sink is 14 cm.
I am amazed with your work, i wished my kitchen would have that finish unfortunately the people that did it dont know how to joint the tiles and make them seemless. Could you tell me about that glue with color that you added at the joint of the tiles please ? Thanks
Hello dear! Thank you for the watching and your comment! I use poliester glue for stones and marble like Tenax ou Granit. To color it I use diy for paint .
Thank you for the watching. Actually I have one video about tools and material I have used . But especially about the glue: Tenax mastic for stone and marbles.
👋🏼 I use mastic for to fill and glue marbles and stones. There are different names of it like “Tenax” , “Granit”. In Europe you can find “General”. Search it on the internet.
I'm a big fan of your work! It's inspired me to give it a go myself. I purchased some cheap tiles to prototype and trial with, and I have some questions regarding my results: 1) I found it incredibly difficult to do a nice 45o bevel with an angle grinder, particularly so on the inner edges of the trough. I found that the polished edge of the tile would chip when I did it with my angle grinder. I suppose that this is a matter of practice, but it could also be my blade. Is there a particular blade you recommend? 2) What adhesive do you use? I saw on one of your other videos, and from comments that you use Tenax, but there are several different polyester adhesives they carry. Is it the "Knife Grade White" that you use, or some other one? 3) What dyes do you use for your adhesive? 4) What size of hole saw do you use to cut the holes? 5) Where do you get the stainless steel drain pipe? 6) How do you glue the drain pipe to the sink? Do you seal it as well? I plan on making a very large sink, 20"x40"x12". Given the size, I was planning on supporting it from the bottom and building it into a cabinet. Do you have any advice/suggestions/reservations? Keep up the great work, your sinks look amazing!
Hello dear! Thank you for the watching and the comment. I really appreciate it. 1) yes this is the matter of practice. But you can try instead of grinding conical stone to use polishing pad N 200. 2)about poliester glue. Here where I’m living Tenax is expensive one. So we use another poliester glue. It is cheaper . Try to make some tests with glues of Tenax. I know there are solid and liquid form. Did you try to work with solid one? 3) I use common dyes used for painting walls 4) 32 mm or some times 35 mm 5) take a look at Aliexpress. 6) you mean the sink drain valve right? I fix with sealant PU 40 . Do not use poliester glue for fixing it.
About fixing. I would use 2 brackets fixed on the wall to support the sink, and after installing the sink I would fix a cabinet . But your idea is good as well. You can put the sink about some bottom of the cabinet .
so is the only thing holding up the sink a rod glued to tiles on the wall? Or am I missing the way it is attached? also I wonder the integrity of the sink if someone we to drop something heavy like a buzzer or hair dryer because it is hollow? I might try to make something like a ramp style but maybe reinforce the back with some sort of substrate
To fix the sink you can use any mount brackets according your preference. In my case I use diamond saw hole diameter 35 mm and the tube with d=33 mm. With the saw I drill a hole on the wall and after put the tube into the wall and fix with mortar or with proper glue for marbles. The reason: is cheaper in 3 times then mountain bracket. About integrity of the sink. The sink from porcelain tiles is like any clay-based ceramic material. If something heavy to drop about there is risk to be broken. And congratulations for your observation: actually there is important to reinforce with another layer of tiles to improve resistance .
Приветствую, Василий! Мы в Бразилии используем смесь полиэфирной смолы с промышленным тальком. В России можно использовать «Клей Elkay ЕВ25 - GRANIT» Также ребята рекомендуют litofix от Litocol и Mastice 2000.
Приветствую Рашид! В России и думаю в других странах СНГ продается полиэфирный жидкий клей для работы с камнем. Есть Granit, litocol и разные другие. Также можно попробовать купить полиэфирную прозрачную смолу (с отвердителем) и белый промышленный тальк (нужно поэкспериментировать какой из 4 видов наилучше подойдёт) и сделать свой клей.
@@Porcelanataria_45_graus Рахмат. СПАСИБО БРАТЬ.БЛАГАДАРЮ.УДАЧИ ВАМ.ЕШЁ ЖДЁМ ЧТО ТО НОВИНКОГО.ЭТОТ ТРЮК ОБЕЗАТЕЛЬНО ПОПРОБУЮ.ВЫ УЖЕ ДЛЯ МНЯ НАСТАВНИК...
Thanks for you comment! You can search on the internet: marble glue, marble adhesive, stone mastic. There are some name like Tenax, granit, shelber, joinfix etc
Hello dear! Thank you for the watching. The size of the sink is 60/42 cm, The high of the skirt is 12 cm, The high of inner walls of the hole is 11 cm, The hole about 40/26 cm, The backsplash of the sink is 14 cm.
The question is will the water flows down or stock there because our sink that is diy too is has water in sink that never go down unless we push the water to the hole
@@Porcelanataria_45_grausАссалому алейкум Дамир правильно говорит, всё отлично кроме смесителя, я думаю лучше всего подойдёт смеситель в стиле хайтек.
Olá! Posso. Parte externa 60/42 cm Frontal : 15 cm Saia 15 cm O buraco da captação da água: 44/28 cm Lateral comprido do buraco da captação 46 cm com altura 12 cm Lateral curto 28/12 cm
Hello. Thanks for the compliment! Let me clarify the matter, the tile inside the basin is removable it is not fixed with glue. He serves to hide the drain hole. You can take out it if it is necessary.
@@Porcelanataria_45_graus oh sorry i didnt notice .Another question. I make marble basins almost same way, but I always put tile grout inside the basin joints because older craftsmen told me that AB marble glue loses its adhesive capability after a period of exposition in water. Did you have any problem on these tile basins ?
ua-cam.com/video/o7sZglYfOU0/v-deo.html how to make washbasin with porcelain tiles ( new model)
It's very nice when a person can work with his head and his hands. Keep your great work!
Anything is possible when you have the right people there to support you. 💪🏼❤️
Hey, thanks for making this. Awesome instructional video.
I have to tell you this is the best sink EVER. All MFG that make sinks make an indention at the drain inside the sink and it ALWAYS holds water and stains. You created a sink that seats the drain and with NO indention. I love it. I have 3 bathrooms. Woman 67 in Texas.
😊❤️This is the best comment I had ever!
Красота да и только. Всё доступно и понятно показано🙌🔥🔥🔥
This video was amazing, had me *GLUED* the whole time! im actually going to save this video and have a go myself when i can, thank you!
It is my pleasure to be useful! Thank you for your comment!
Amazing! Really nice! Good job
Beautiful!!!
This guy is a master and I'm not even going to attempt this.
Love it, it turned out amazing! You make me want to my own one! 😮
Thanks for your complement!! Lets continue to do our best !
C'est un excellent travail, bonne chance
Awesome work 🔥
Parabéns muita qualidade profissional de primeira
very informative. thanks! 👏🏻👏🏻👏🏻
Thank you. I’m following you !
Incredible!
Impressive great masterpiece ❤
Good job 👏🏻👏🏻👏🏻👏🏻
Great job 👍
❤muito obrigada 🎉🎉🎉🎉 mostrou absolutamente todo o processo até como instalar! Saudações do Rio de Janeiro - Brasil
❤️
God willing, I liked your work, you are an amazing person, God helps you and helps you in everything Long live to you from Tunisia 🇹 🇳 🇹🇳 🤍
Thank you dear! 😀
Love you from Noakhali, Bangladesh 🇧🇩
Hello from São Paulo! Thank you for the comment!
Круто получилось. 👍🔥
Я задавал вопрос к прошлому видео, повторю здесь. Для чего используется пу герметик? Если просто клеем заполнить , не достаточно?
Very creative. Quick question for you: I have purchased a basin which looks like it’s constructed exactly like this with pieces of tiles glued together and the weight is quite heavy. As i am quite old school and used to one piece molded basins I’m a bit paranoid as to how durable the glue is that’s holding all these tiles together. And essentially the main bowl holding the water has lots of tile joints. Do these hold up well even if the bowl was full of water and in the long run?
Hello dear! Thank you! Yes it is very important the tile joints hold up the water and the sink do not leak. For this there is some process to glue the pieces between themselves. Check some important step:
1) after polishing it is important make a rough surface . In the video I have showed how to do this
2) before glue the tiles you need to eliminate all dust etc
3) to use PU sealant in all corners and tape for drywall with the glue to reinforce the pieces.
Wish you to fabricate your sink with your
✋ 🤚
PERFECT
Beautiful design, outstanding execution, excellent video! THANK YOU.
WHAT is used to create "glue for stone"???
Hello! Thank you, I use the mix of polyester resin (with catalasator) + industrial talc. I know that in Europe exists special glue named General about 20 € for 1 kg.
But you can also buy any mastic for fix and glue marbles and stones like Tenax ou Granit
Turning shit into a Snickers is an art, well done, I steal that idea from you!
Nice
acabei de mim escrever. e vou tentar fazer uma dessa depois desse passo a passo valeu boa sorte no canal
Olá 👋🏼 maninho! Muito obrigado! Com certeza vai fazer sua ainda mais bonita!
This is Genious, i wish my husband would let me try this 😅
Thank you! You can do it!
HI! GREAT WORK! Do you have a manual for this including the waiting time for application of glue?
Thank you dear for the watching. Unfortunately I don’t have the manual. Only the one on the video .
This is amazing work; what country are you working in? I am in the USA and think you do fantastic work!!
👋🏼 hey, thank you very much! I’m living and working in Brasil 🇧🇷. Near São Paulo.
Oh!! I have been to Rio years ago!! Beautiful country!
@@Porcelanataria_45_grause eu achando que tu era gringo 😂. Parabéns pelo lindo trabalho ! Esse vídeo está maravilhoso com todos os detalhes. Me inscrevi e deixei meu curtir!
Amazing work. We will try. Do you have the sizes of the different parts or how do you figure out the measurements
?
Hello dear! Thank you for the watching.
The size of the sink is 60/42 cm,
The high of the skirt is 12 cm,
The high of inner walls of the hole is 11 cm,
The hole about 40/26 cm,
The backsplash of the sink is 14 cm.
I am amazed with your work, i wished my kitchen would have that finish unfortunately the people that did it dont know how to joint the tiles and make them seemless. Could you tell me about that glue with color that you added at the joint of the tiles please ? Thanks
Hello dear! Thank you for the watching and your comment! I use poliester glue for stones and marble like Tenax ou Granit. To color it I use diy for paint .
Awesome. Do you mind sharing list of all the materials you used to complete the job? Esp the recommended mastic glue brand
Thank you for the watching. Actually I have one video about tools and material I have used . But especially about the glue: Tenax mastic for stone and marbles.
what kind of glue u use for sides and how to search it and where to find it?
btw great job and pretty nice looking classy👍👍👍
👋🏼 I use mastic for to fill and glue marbles and stones. There are different names of it like “Tenax” , “Granit”. In Europe you can find “General”. Search it on the internet.
I'm a big fan of your work! It's inspired me to give it a go myself. I purchased some cheap tiles to prototype and trial with, and I have some questions regarding my results:
1) I found it incredibly difficult to do a nice 45o bevel with an angle grinder, particularly so on the inner edges of the trough. I found that the polished edge of the tile would chip when I did it with my angle grinder. I suppose that this is a matter of practice, but it could also be my blade. Is there a particular blade you recommend?
2) What adhesive do you use? I saw on one of your other videos, and from comments that you use Tenax, but there are several different polyester adhesives they carry. Is it the "Knife Grade White" that you use, or some other one?
3) What dyes do you use for your adhesive?
4) What size of hole saw do you use to cut the holes?
5) Where do you get the stainless steel drain pipe?
6) How do you glue the drain pipe to the sink? Do you seal it as well?
I plan on making a very large sink, 20"x40"x12". Given the size, I was planning on supporting it from the bottom and building it into a cabinet. Do you have any advice/suggestions/reservations?
Keep up the great work, your sinks look amazing!
Hello dear! Thank you for the watching and the comment. I really appreciate it.
1) yes this is the matter of practice. But you can try instead of grinding conical stone to use polishing pad N 200.
2)about poliester glue. Here where I’m living Tenax is expensive one. So we use another poliester glue. It is cheaper . Try to make some tests with glues of Tenax. I know there are solid and liquid form. Did you try to work with solid one?
3) I use common dyes used for painting walls
4) 32 mm or some times 35 mm
5) take a look at Aliexpress.
6) you mean the sink drain valve right? I fix with sealant PU 40 . Do not use poliester glue for fixing it.
About fixing. I would use 2 brackets fixed on the wall to support the sink, and after installing the sink I would fix a cabinet . But your idea is good as well. You can put the sink about some bottom of the cabinet .
You are a profissional my friend 😊
Thank you so much! 👍🏻
Для армировки внутренних углов попробуй tafteip ленту, она полимерная, на разрыв хорошо держет👍
Она обычно в гипсокартонных работах используется? Я поискал у нас на местных сайтах и не могу найти.
🔥🔥🔥
so is the only thing holding up the sink a rod glued to tiles on the wall? Or am I missing the way it is attached? also I wonder the integrity of the sink if someone we to drop something heavy like a buzzer or hair dryer because it is hollow? I might try to make something like a ramp style but maybe reinforce the back with some sort of substrate
To fix the sink you can use any mount brackets according your preference. In my case I use diamond saw hole diameter 35 mm and the tube with d=33 mm. With the saw I drill a hole on the wall and after put the tube into the wall and fix with mortar or with proper glue for marbles. The reason: is cheaper in 3 times then mountain bracket.
About integrity of the sink. The sink from porcelain tiles is like any clay-based ceramic material. If something heavy to drop about there is risk to be broken. And congratulations for your observation: actually there is important to reinforce with another layer of tiles to improve resistance .
do a complete video on tile adhesive and PU sealant
Hello, this is good idea. I will think about
if you had a workshop teaching this, I would be the first one to register
Hello dear! Thank you for the idea. I will think about it
Pls, make bathtub DIY from ceramic
Its took Too much time and effort👍🏻👍🏻👍🏻
What did you use for the reinforcing of the sink. Is it just tile?
In this case I used tape for drywall and the mastic to reinforce the sink.
Great work !!! But please tell me in the end you put a tile in the sink where you don't see the sink valve ..HOW u put that tile in ?
Hello dear ! Thank you for the watching! This tile is just for hide the bottom and the valve. But it is easy to remove it. It is not glued.
Hello dear ! Thank you for the watching! This tile is just for hide the bottom and the valve. But it is easy to remove it. It is not glued.
Hola! Muy buen video, alguien me podría decir que tipo de pegamento usa?
Ola amigo. Eu uso cola para mármore e granito. Se tu estás na Espanha podes procurar cola que se chama General .
Дамир здравствуйте!Хотелось бы по подробнее про использование марки клея,и работы с ним.Заранее СПАСИБО!!!🤝🤝🤝
Приветствую, Василий! Мы в Бразилии используем смесь полиэфирной смолы с промышленным тальком. В России можно использовать «Клей Elkay ЕВ25 - GRANIT»
Также ребята рекомендуют litofix от Litocol и Mastice 2000.
Дамир 🙏 от души большое СПАСИБО!!!Буду и дальше следить и учиться,очень мало информации в России.
Клей DERMAX двухкомпонентная для камня
How u add colors in glue? Which type and what proper color so its easy to clean later and do not change color as it gets old..?
❤❤❤
👍👍👍👍
АсаСалом алекум Дамир Ака.Очень круто супер.про клей инфо пожалуста..Дай Бог здоровье.Спасибо
Приветствую Рашид! В России и думаю в других странах СНГ продается полиэфирный жидкий клей для работы с камнем. Есть Granit, litocol и разные другие. Также можно попробовать купить полиэфирную прозрачную смолу (с отвердителем) и белый промышленный тальк (нужно поэкспериментировать какой из 4 видов наилучше подойдёт) и сделать свой клей.
@@Porcelanataria_45_graus Рахмат. СПАСИБО БРАТЬ.БЛАГАДАРЮ.УДАЧИ ВАМ.ЕШЁ ЖДЁМ ЧТО ТО НОВИНКОГО.ЭТОТ ТРЮК ОБЕЗАТЕЛЬНО ПОПРОБУЮ.ВЫ УЖЕ ДЛЯ МНЯ НАСТАВНИК...
S'il vous plaît quel adhésif utilisez-vous pour fixer les pièces
Hello! You can search on Aliexpress eBay or Amazon mastic for fix and glue marbles and stones. You will find “Tenax” or something like this. “Granit”
IT"s GOOD IR WHAT IS THE MATERIAL USED TO JOINT PART COULD YOU SEND ME ITS NAME AND IS IT RELIABLE FOR LONG RUN?
Thanks for you comment! You can search on the internet: marble glue, marble adhesive, stone mastic. There are some name like Tenax, granit, shelber, joinfix etc
And yes it is reliable for long time.
🎉❤
What glue did he us to put it all together
The mastic to fill and glue for marble and stone . Search it on EBay or Aliexpress
Brillant sink, what are the measurements for the sink, please?
Hello dear! Thank you for the watching.
The size of the sink is 60/42 cm,
The high of the skirt is 12 cm,
The high of inner walls of the hole is 11 cm,
The hole about 40/26 cm,
The backsplash of the sink is 14 cm.
@Porcelanataria_45_graus thank you so much
@@Porcelanataria_45_graus thank you 🙏🏽
The question is will the water flows down or stock there because our sink that is diy too is has water in sink that never go down unless we push the water to the hole
The water flows down and do not stock . It is tested and is working
sir which glue you used for stick a tile???
you can use any mastic to fill and glue marbles and stones. There are a lot of fabricators and names but it depends where you live.
@@Porcelanataria_45_graus thanks 😊 sir
which gum are you using (type of gum not the brand)
Poliester glue for marbles and stones
Whats the type of glue you are using? How long does it last?
Poliester glue for marbles and stones like Tenax, Granit or General. It lasts for years
hello how thick is the porcelain tile used ? 15mm? 12mm ? 9mm ?
Hello 10 mm
Can I use epoxy to join because I can't find the glue
I have never used epoxy to joint tiles .
Whats the thickness of that tile? Does thickness of the tiles matter?
The thickness is 10 mm, but I have used also 8 mm, that is well good too.
Ooh, ok thank you
What is the name of the material used for adhesive?
The glue for marbles and stones.
What glue did you used?
Tenax, Granit.
Hello where can i find this Glue for sink ? can I buy in internet someone help please
Hello. You can search on EBay. There are some mastics.
What is de size of the tile you use?
120/60 cm
In the last minute the sink has a hole and then the hole dissappears
Yes I put piece of tile to hide the hole. But it is removed
@@Porcelanataria_45_graus 😅
dose it strong
Yes it is! 💪🏼
what is the tillesthickness?
9 mm
What glue do you use ?
The glue for marbles and stones.
@@Porcelanataria_45_graus
Thank you ♥️👏
Itu pake lem apa ya
Saya menggunakan perekat batu poliester seperti Tenax atau Granit
Me gustó todo menos el caño o grifo porq es de cocina😮
🫣😁 you have a reason
@@Porcelanataria_45_grausАссалому алейкум Дамир правильно говорит, всё отлично кроме смесителя, я думаю лучше всего подойдёт смеситель в стиле хайтек.
A 4to B tubuke?
Germetik PU
Show
Vc pode passar a medida
Olá! Posso.
Parte externa 60/42 cm
Frontal : 15 cm
Saia 15 cm
O buraco da captação da água: 44/28 cm
Lateral comprido do buraco da captação 46 cm com altura 12 cm
Lateral curto 28/12 cm
Ещё бы перевод текста был😂 а то нифига не понятно
Это видео есть с русскими субтитрами
@@Porcelanataria_45_graus кинь ссылку не нашел или пропустил
I watched the whole video. Amazing workmanship. But because i am careless, that would be dangerous for me.
instagram.com/porcelanataria_45_graus?igshid=MzRlODBiNWFlZA==
Hello who can build one for me?
Hello dear! You can try by yourself)
I would like you to build and I will pay
If you can please thanks
you did a great job. But why In the end you put another tile inside the basin and cover the drain hole?
Hello. Thanks for the compliment! Let me clarify the matter, the tile inside the basin is removable it is not fixed with glue. He serves to hide the drain hole. You can take out it if it is necessary.
@@Porcelanataria_45_graus oh sorry i didnt notice .Another question. I make marble basins almost same way, but I always put tile grout inside the basin joints because older craftsmen told me that AB marble glue loses its adhesive capability after a period of exposition in water. Did you have any problem on these tile basins ?
That is a classy look! Love it❤
Здравствуй Дамир, есть у вас Инстаграм
Приветствую, Вячеслав! Да
Porcelanataria_45_graus
Damir Almukhambetov