How To: Remove 'Change to a Larger Hoop' Error - Baby Lock Valiant
Вставка
- Опубліковано 5 вер 2024
- In this week's video, we look at how to remove a common message of "Change to a Larger Hoop" then once you change to a larger hoop, the error repeats itself.
We hope this quick tutorial will help you remove the error!
Please stay tuned next week for another new Baby Lock Valiant Tutorial
I can’t thank you enough for taking the time to do this video! I was driving myself crazy trying to figure it out. You can’t just pack this big boys up and take them to a repair shop. And when you do oh my goodness. Thank you so much. God bless you
Thank you! :-)
Thank you so much for your public service announcement! My husband was very upset when he got that message in the middle of his stitch out. Your fix worked like a charm!!!
:-) I had to look at your video again. I was pushing one button that was not the right one and Bingo! It worked. My repairman told me I needed a new monitor. I paid 1k for the tune up. They had my machine for about 3 months. They changed my tension screws to new ones and it made a big difference, but my hoop sensor was not working when I got it back. So, thank you so much. I fixed it thanks to you. I call it the “Five minute fix that worked.”
Glad you're up and going again! Thank you for the kind words - but we all learn from one another! :-)
You're the new hero in our house - my wife was going ballistic over that problem, and you fixed it! THANK YOU!!
Just came across your video. I couldn't remember how to fit my embroidery frame back on after using my cap frame. Not only did you show me that but you also showed me how to correct an error on my machine which I too have regularly. Thank you so much. 2 fixes for the price of one.
Glad everything worked out for you!
Sometimes I wish UA-cam could put a "LOVE" option instead of just a "LIKE" for videos. Thank you!!! This was a tremendous life-saver.
Thank you! Glad it worked! :-)
I thought I had broken my Alliance, No error message, but could not move needle to start work on side of my hoop, scoured book for troubleshooting hoop sensor, Crickets ... your video is the only one to help, my genius was to find your genius for a fix. Thank you for your help, still great after you posted 3 years ago!
Thanks! On my babylock BMP6 when I took it apart like you said what I realized is their is pin that fits into a grove on the piece I took off. So when putting the piece back I made sure the pin was in the grove, and this made it recognize all the frames.
Jerry - You are ALWAYS my 'go-to' guy for any of my Brother 1055x questions and frustrations. Thanks for this video. It was a lifesaver. My design was 3.5" wide and it would NOT let me use the 100mm x 100mm hoop until I listened to your suggestions. Thank you Thank you.
Glad it worked! :-)
BRO!!! YOU ARE THE MVP! I was losing my mind....come to find out one of my secure screws got loose so it wouldnt let me use ANY hoop. You're my hero
Glad it helped! :-)
I spent all of last night trying to figure this out and then i found your public service message. Perfect thank you.
THANK YOU. IWAS LOSING MY MIND TRYING TO GET MY ERROR MESAGE TO GO AWAY. THIS SAVED ME SO MUCH TIME.
Glad it worked! :-)
Thank you for making this video. I tried what you suggested, and it worked perfectly. Can't believe I didn't UA-cam this error long ago.
Glad it helped :-)
Thank you soooooo much! I just had to tighten the screws. Wasted hours trying to figure this out. Thank you!
Glad it worked! :-)
Thank you for this video. I was able to eliminate the "Change to bigger hoop message" error message by following your tutorial.
Glad it worked for you!
Going to try this and hope it works. Came here looking specifically for a fix for this issue.
It totally worked! Thanks so much for sharing this trick. It was so very frustrating and I never would have thought to do this! Thank you; thank you; thank you!!!
I totally agree with Olivia!! Too bad I spend countless hours trying different size hoops!! Thank you!!!!!!
Thank you!! I just wasted 2 hours trying to get rid of that message. Going to try your solution now. Fingers crossed!
Hope it works! :-)
I am SO glad you shared this with me. I have been coping by going to edit and reducing the size by a couple of clicks. Fast and easy, but YOU solved the source!
Glad it was helpful! :-)
Thank goodness for your "PSA"!!! It saved me from wasting a LOT of time and STRESS! Worked GREAT! THANK YOU...THANK YOU...THANK YOU!
Glad it helped! :-)
I say 'ditto' to everyone before me. Can't thank you enough!! Worked like a charm.
Oh my goodness THANK YOU!!! I didn't even have to do what you said. I went to remove the A frame and noticed the screw on the far right was loose. As soon as I tightened it up, I was good to go. YOU ROCK!
Thank you for the kind words! :-)
I think I am in love with you, it worked PERFECTLY after I removed and put back on! You are my hero, thank you so much!
It worked perfectly for me. I have fooled with this all day. Thank you for the solution
Glad it helped! :-)
That was it! You saved my bottom!
I was having the same error message with my fast frame and couldn’t figure what I was doing wrong! The fast frame needed to be on top of the sensor on my Babylock.
Thanks a million!
Glad it helped! :-)
Thank you so much! I wasted a day with this problem! You are my hero!
THANK YOU so very much. Such an easy fix
Thank you SO MUCH for this video. I was having this exact problem. I found out that one of the adjustment screws was loose so just had to tighten it to fix the issue. Would have never guessed it was that simple. Big Help!!
Glad it helped! :-)
Thank you so much for making this video!!!! I was going crazy trying to figure out how to fix this. Your fix worked like a champ!
I needed this so bad as I just got my machine Friday and was going crazy trying to figure out why! Thanks u r the best instructor!
omg i got my machine yesterday did all the same things you did. watched video and took off frame. TA DA it works love you
OMG THANK YOU!!!!!! I have been going crazy trying to figure it out!!!
Glad it worked! :-)
I have had this happen myself and had no idea what was wrong. Thanks so much for this information. I'll give it a try next time.
Hope it works! :-)
It worked!!! Literally was jumping up and down so happy!!! Thank you!!!
I'm going to try this..I've spent the last 30 minutes trying to figure this out...Yes...you are the best..thanks for sharing..it worked
if you didnt get it yet read my comment
Thank you so much!! I have a Brother Persona and this was happening with my fast frame. Your solution worked for that as well and I cannot thank you enough!!
Glad it helped! :-)
Jerry, you will get that error message when the screws are loose. There is a sensor in the screw area, but you usually don't have to take them out, but if you just tighten them, the message will usually go away! Thanks for all your tips and tricks!
Any hat hoop tricks? What's the largest size it will allow?
Thank you so much for this quick tip!!!! I’ll remember to do this!
Glad it worked!
Omg thank you so much. I was going nuts trying to get it to change. You are awesome!!!!!!!!!!
Glad I could help! :-)
Thank you so much for this video tip. I have a Brother PR600 and the hoop error was the same message as is the hoop holder. You have saved much frustration and I appreciate this information. In my case it was the perfect fix!
Hi Judi! Glad it helped! :-)
This is still one of my favorite videos on youtube! lol SO helpful!
Glad it was helpful! :-)
Thank you, thank you thank you! It worked and saved my sanity! So kind of you to take the time to educate and share your knowledge.
You're welcome!
Thank you so very much ! I was going insane . Bless you for posting this ❤
Glad it helped! :-)
Thanks for letting us know it's a sensor issue!
Happy to help! :-)
I tried. It worked. Thank you for the great tip!
Glad it worked! :-)
Thank you! This worked for me on my baby lock enterprise
Glad it helped! :-)
Thanks Jerry, you save me some headache
Glad it worked out! :-)
thank you ! thank you! thank you! Just what I needed. You saved me from pulling my hair out !
Glad I could help! :-)
I have the same problem on my Brother PR 1000e. I will try this. I get so frustrated for the exact reasons you mention!
Thank you so much. This is maddening. They could have done a better design, in my opinion.
Thank YOU for a quick fix!!!!!
THANK YOU!!! Worked on my brother machine!
Glad it helped! :-)
thank you so much! i couldn't figure out what was wrong and this worked! :D
Glad I could help! :-)
I’m getting that message in the middle of a stitch out. My machine is sewing/ embroidery. Sometime I can turn off the machine, bring the design back up and then back up a color change or two.and it will work.
The real fix is to calibrate your hoop sensor. It sometimes goes out of whack. When you calibrate it stops asking you for a larger hoop
I really enjoy your informative videos. I want to monogram shirts using a 9” and 10” font. I have the Brother Entrepreneur 6-plus PR670E along with the regular hoops and a set of the fast frames, including the 14x14 jumbo hoop. I just can’t seem to find any tutorials on how to accomplish this task. I hope you can help.
Change to larger hoop notification occurs after vibration of machine causes the small middle screw on frame gets loose. I just retighten the screw and no problem. I remember how frustrating it was before I figured this out
Thank you so much. I was about to lose my mind!!!
Thank you, Jerry. It works!!!!!!!!!
Glad it worked! :-)
This worked the first time I had this trouble. I just went to use my largest frame and no matter what I tried it won’t work. If you have any other tips I would love to hear it!
Nope tried that...didnt work for me...so i turned off the machine and will try again later...
It’s not working for me either 😩😩😩
Thank you so much! Wasted 4 days on this 😂😂😂
Glad it helped!
I just put that design into my computer put it in my software save it as a new PES and now it works and will let me stitch it out :P Weird I know but it's worked each time for when when I had to do that on my flat beds too.
That helps so much I have been working for a long time on changing my hoop size thank you thank you
Glad it helped! :-)
How do you do it with a BabyLock Flourish II?
I have a Sofia 2 Babylock and it feeds the material in reverse. Wanted to see if you may know what the problems, thank you for your help.
THIS WORKED ON MY BABYLOCK VENTURE ERROR XY AXES AND CHANGE HOOP SIZE.!!!!!!
Worked for me !!!
Glad it worked for you!
It worked. Thank you thank you.
Glad it helped
Great tip! Worked like a charm!!!
Glad it helped!
THANK YOU SO MUCH!!!! You are a lifesaver.
Thank you , Barbara! Glad it helped!
Thank you so much.
hi, I followed your direction and it did not fix my problem. I have been missing with this all day long! do you have any other suggestions? Is there away to change the size on the screen part of your machine??
You are awesome 😊 thanks so much for your helpful videos!
Glad you like them!
Jerry Do you recommend using magnetic bobbins Thanks
Hi Doris! I do not use magnetic bobbins. I order my bobbins, and almost all of my thread, from www.metroemb.com. (Just FYI - it's not that I 'do' or 'do not' recommend magnetic bobbins...I just use regular bobbins and they work great for me.) :-)
Is there any solution that works mid-way through embroidery? I had to swap the bobbin and started getting the message.
thank you, it worked!
Glad it worked! :-)
GOD BLESS YOU!!!! It worked. OMG what a PITA! 😂
I removed and put back on and still got, “change to larger hoop”. I will try again, standby!
Do you have a solution for the exact same problem on the Solaris? Took it to the shop and of course it didn’t do it there. Brought it home and sure enough it’s doing it again.
Thank you for your note. Unfortunately, I am not familiar with the Solaris.
Thank you :)
Glad it worked!
I’ve done this same thing. Worked for me too.
It worked for me! Thank you!
Hi I keep getting it during my sew. Like to make two designs I put one on each end of largest hoop. I think the bounce of the hoop sets off that error code. I have a babylock Ellisimo, Would same theory work as well?
That would be a great idea to try, to see if helps! :-)
Very useful...thank you
Wow! I’m getting this message with SEW WHAT PRO. My machine is a Babylock Spirit. Any tips on that? Thanx!!!
I have a 6 needle and have the same problem, try but it won’t work, help!
thank you so much it really helped me a lot
Very helpful
Thanks 😁😁
Thank you so much. It works!
thank you!
Hope it was helpful! :-)
I have a babylock aventura 2 and it's telling me to choose a larger hoop....but the letters are only about an inch big....the hoop is 5 X 7 and that's way big enough....can you help with that?
Hi Lynette, I'm sorry, but I am not familiar with the Aventura. :-(
Is there a workaround for the Destiny?
Unfortunately, I am not familiar with the Destiny...
I have found that i just have tighten the center screw.
Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
OMG! You're the best!!!!
Thank you for your kind words!
Bravo!
Thank you :-)
How do you remove it for an Altair
Unfortunately, I have not worked with an Altair.
How about a brother Stellaire that’s doing that “change to a larger hoop! Help
I'm sorry, but I am not familiar with the Stellaire machine.