Car body cable maintenance

Car body cables are an important component in the car's electrical system.
Body cables function to channel electric current from a power source, such as a battery, to various car electrical components, such as lights, starter, engine, audio system, and others.
These body cables have an important role in the car's electrical system, so it is important to maintain them so that they continue to function properly.
Here are some tips for caring for car body cables:
Check the condition of the body cables periodically.
Especially if your car is quite old. Look for loose, frayed or damaged cables. If there is, immediately repair or replace the cable.
Avoid fluid leakage. Fluids, such as oil, water, or fuel, can cause corrosion of the cable body. If a leak occurs, clean it immediately and repair the cause.
Maintain batteries or batteries regularly. The battery is the main source of electricity for the car's electrical system. If the battery is not maintained properly, it can cause interference with the electrical system, including the body wiring.
Avoid unnecessary electrical modifications because they can cause excessive load on the body cables, which can cause damage.
Improper electrical modifications can cause damage to the body wiring.
Therefore, if you want to make electrical modifications, you should consult with an expert.
Check the condition of the cables in the engine room. Body cables that are in the engine room are more susceptible to heat and corrosion. Pay attention to the condition of the cable regularly and repair it immediately if there is damage.
Perform vehicle servicing regularly. Routine vehicle servicing can help monitor the condition of body cables and other electrical components.
Here are several steps to check the condition of the car body cables:
Check the condition of the cable body.
Look for loose, frayed or damaged cables.
Pay attention to whether there are any fluid leaks.
If there is damage, immediately repair or replace the cable.
If you are not sure how to check the condition of the car body cables, you should take the car to an official repair shop or trusted repair shop.
By regularly maintaining your car's body wiring, you can help keep your car's electrical system functioning properly and prevent damage.

[@Bayuhutamamotor]

Terima kasih kawan sudah berbagi tips dan informasi yang sangat bermanfaat ini 👍

[@RahmanSantoso]

Terima kasih kembali omku 😷🤝

[@carretaofficial]

Wuih...makin banyak ilmu yang menarik Paman, sehat selalu ya...kapan2 kita ketemu lagi.😁

[@RahmanSantoso]

Aamiin, sehat selalu juga untuk sampean dan keluarga. Semoga konten saya ini menjadi manfaat untuk semua.😷🤝

[@rojalirahmat5477]

Di kotak sekring panas bagian sekring wifer dan sein, sama
Dinami wifer jga panas, kira2 apa penyebabnya ya om, kabel di goyang2 keluar percikan di rumah sekring. Terima kasih

[@RahmanSantoso]

Jika panas saat wiper on, berati dinamo konslet atau bisa jadi rusak.
Tapi gejala yang ringan karena soket kurang rapat saja.
Lebih baik perbaiki kabel body omku, selain lebih aman nanti bisa mengetahui kabel2 mana yang bermasalah setelah kita bongkar. Demikian, semoga bermanfaat 👍😁

[@nasserhayaza]

Apa penyebab, setiap menyalakan lampu sein lampu senja,di lampu kontrol di spedometer tsb redup apalagi nyalakan sein agak keras redupnya mobil saya carry tahun 1986 ,apa solusinya, terima kasih

[@RahmanSantoso]

Indikasi memang pada kabel body om, bisa kurang rapat. Cek kabel accu (-) ke body dan ke mesin. Dan juga jalur2 kurang rapat atau pun wesrtan/hambatan kabel besar karena faktor usia kabel bisa mempengaruhi juga

[@PATITUT2]

mas,, biaya cek full kabel listrik carry 1:0 kira2 berapa ya mas kalau pakai jasa sampeyan?

[@RahmanSantoso]

Kalau jasa 500rb full turun kabel body(set ulang). Omku 🤝😷

[@masgon3477]

Kl yg 1.0 injeksi bs gak omm

[@RahmanSantoso]

Kalau cek jalur2, pemggantian2 atau perawatan bisa omku, hanya saja kalau set/reset ecu ilmu masih kurang dan juga peralatan. Mohon maaf jika jawaban saya kurang berkenan. Terima kasih 😷🤝

[@muhammadsalafudin5340]

Tanya mas, abis ganti rotak pake punya zebra, lampu sein kok jadi cepet kefipnya ya? Apakah ada saran

[@RahmanSantoso]

Kasus ini sangat jarang terjadi karena antara rotak dan sein beda jalur kelistrikan. Saran coba ganti flasher kemudian cek lampu2 sein sambungan2 pada soket2nya. Kadang flaser beda jenis lampu juga pengaruh ritem kedipnya(antara bohlamp dan led).Terima kasih semoga bermanfaat 🤝😷

[@muhammadsalafudin5340]

@@RahmanSantoso baik mas, nanti dicoba, terimakasih

[@RahmanSantoso]

Sama-sama omku

[@muhammadsalafudin5340]

Update mas
Soket rotak tak cabut, trus sein tak nyalakan kedipnya normal. Giliran soket tak pasang lagi, balik lagi kedipnya cepet. (Rotak nyala=sein jadi cepat)

[@muhammadsalafudin5340]

@@RahmanSantoso mohon sarannya