Oh NO! Yet another one of my instruments that I've had in storage for 15 years that might need a new battery. Thanks for the reminder so I can allocate time to change the battery before assuming that the SPD-20 will be ready to go when I need it (which is soon).
fine little tutorial! I'm attempting to open my SPD-8, whose case seems to be very similar, but I'm having a lot of resistance pulling the back off and don't want to break it! My battery is probably fine but I will check it when open and my goal is to modify the circuitry (pad breakouts and USB adapter) as well as paint the case. My question: does one have to put considerable force to pull the back from the unit? Yes, all externally visible screws have been removed and I seem to have separation of case all around between 5 -15mm on any given side (less usually on the rear side), it seems there is some clip holding the case together in the middle rear, but nothing visibly apparently peaking through the separation. Appreciate anyone's comment/assistance!
Not 100% sure but I think there's 2 plasic clips on top left and right of the unit. Give it a gentle pry with a small flathead screw driver. Let me know how it goes. Maybe a plastic credit card would be better to unclip.
Hello, something strange happens with my octapad, I program it, save it, and then next day it's back to normal, do you think it is because of the battery? Or what do you think it is?
From what I red, this message could occur if you strike a pad while turning on the power. If you press any button, the display error should disappear. If it doesn't disappear, I guess there is a defective pad (piezo).
Oh NO! Yet another one of my instruments that I've had in storage for 15 years that might need a new battery. Thanks for the reminder so I can allocate time to change the battery before assuming that the SPD-20 will be ready to go when I need it (which is soon).
Ahah it sucks but it has to be done from time to time. Like after some years :P
fine little tutorial!
I'm attempting to open my SPD-8, whose case seems to be very similar, but I'm having a lot of resistance pulling the back off and don't want to break it! My battery is probably fine but I will check it when open and my goal is to modify the circuitry (pad breakouts and USB adapter) as well as paint the case. My question: does one have to put considerable force to pull the back from the unit?
Yes, all externally visible screws have been removed and I seem to have separation of case all around between 5 -15mm on any given side (less usually on the rear side), it seems there is some clip holding the case together in the middle rear, but nothing visibly apparently peaking through the separation.
Appreciate anyone's comment/assistance!
Not 100% sure but I think there's 2 plasic clips on top left and right of the unit. Give it a gentle pry with a small flathead screw driver. Let me know how it goes. Maybe a plastic credit card would be better to unclip.
Thank you verrrrrrrrrrry much for your beautiful, interesting and soooooo useful video, man)) All The Best = }
Thanks to you. It's a pleasure.
Thnks which battery is good plz reply
The battery is a 3V lithium coin cell: CR2032
@@ThePhilStudio thnks brand name plz
Hello, something strange happens with my octapad, I program it, save it, and then next day it's back to normal, do you think it is because of the battery? Or what do you think it is?
Most likely the battery. You should check it with a mutlimeter. Or just replace it.
Thanks for ur quick response,... What does the battery do? Or what is it for?
@@horacioperez3779 it's there to keep user's settings in memory.
Amigo. Se reemplaza así apagado el Octapad o ensendido?
Thank u sir
You are welcome.
Thanks!!!! :)
Glad to see it helped you!
Thnks sir
It's a pleasure.
@@ThePhilStudio where from u sir
hi my octapad says (analog base error) do you know the solution? Thanks.
From what I red, this message could occur if you strike a pad while turning on the power. If you press any button, the display error should disappear. If it doesn't disappear, I guess there is a defective pad (piezo).
Please tell me if I restart octapad will all my patches deleted ..???
A factory reset would probably delete all your patches. Make sure they are saved somewhere before doing so.
Hi.. How may I Buy this Used Roland SPD drum pad.. please 😊
Unfortunately, that Roland doesn't belong to me.
please how to regoler err analog when i get it on i cant do it
Make sure your power supply is the right one. It is supposed to be 12V AC (this allows to make the +5V , 0V and -5V.)
Sir what is the maximum and minimum battery level
Mean, at what % level we should change the battery
A CR2032 is usually 3,3V and considered dead or to be replaced when it reach something like 2.8 - 2.7V
@@ThePhilStudio Thanks a Lot Sir🙏🏻
@@aniljangrapercussionist8715 You're welcome, do not hesitate if you have any other questions :)
@@ThePhilStudio 🙏🏻😊
@@aniljangrapercussionist8715 I have a spd 11 but wont power on
are you octapad servicing engineer? Please tell me
If you really want to have your octapad fixed, maybe we can have an arrangement.
How to change 8pad on roland spd20
You can replace the Piezo fairly easily, see 3:50 of the video. There are 2 solder on each piezo, make sure you solder them the same way.
I want spd20 pad please help me
I'm not providing any parts for this product unfortunately. I highly recommend that you contact the manufacturer for further help.
Sir where are you from
The PhilStudio is based in Canada. Where are you from?
@@ThePhilStudio sir i want to take a new spd20 tottal percussion pad will you get it from me?
@@ThePhilStudio sir i am from india (punjab)dist.Hoshiarpur
@@goldenbeatmaker5219 like I mentionned I am not a distributor or a seller. You better contact Roland directly for any replacement parts.
Hello sir spd 20 pad give me please final price sir selling
Hi, unfortunately, I am not selling anything.
Marhaba benin spd20 sesler efekli geliyor birde kesiliyor bana yardımcı olabilirmisiniz pil arızasını acaba sizden rica ediyorum lütfen bana yardımcı olurmusunuz
Ünitenin açılıp açılmadığını söyleyebilir misiniz?
@@ThePhilStudio evet açılıyor açıldıktan sonra kit ve trampetten karisik sesler geliyor
how to change rubber change on spd20
You will need to open the unit, remove all the piezo sensor and I don't recall any screws. Let me know how it goes.