Beautiful build, one of the best I've seen so far, and I've seen a lot. Few remarks: I would paint the back screw heads some different color, black doesn't fit, also i would put some pillow filling to dampen the bass, it sounds a bit hollow without it. I did not see an isolation power module between the bt board and the amp. as both amps share the same ground it must produce noise. All and all it is a great build that can sound even better with some minor changes.
King Minhvuong I understand. You are lucky you have good weather. Here in Europe you cannot work outside more than 3-4 months per year. In any case, wonderful tools!
_I'm glad he at least made it airtight when using them. Quite a few builders on YT don't understand the importance of making their boxes airtight to gain the full advantage of the Passive Radiators._
@@RuulOz " phase shift that occurs when the speakers are not aligned properly. The back of each cone (where the dust cap is) should be aligned on the same axis. Otherwise, the high notes will reach the listener before the low notes. There are also possible problems with cancellation. " -quoting Michael LaLena (www.diyaudioandvideo.com/Guide/BuildSpeaker/)
Hi from England. Your work is just mindblowing. IM NEW making and Electronics. PLEASE could you help with a few questions. Please can you tell me what the cutting tool is to make the circles for the speaker holes.? Do you have the router bit sizes please and what kind for- 1) inner parts of the Holes of the speakers? 2) Round off the edges of the unit? What Glue/Cement glue do you use to fix the none screw speakers? With there being 2 switches- 1= Main Power 2= "Dual Switch". So, Does the "Dual switch" power the 2 main speakers using setting 1, and when using setting 2, power the 2 main speakers and the subwoofer? Are there no resisters needed when using preloaded boards? What cable connections do you need to make the extensions from, from the board to their extended plug/connector/fitting? (For example on the sound board you remove all the switches from the board. Then you connected some thin cables from those now vacant speaker turn knobs. What size would you need for those cables?) If it depends on ♎ can you say by how they increase such as a 3♎, or a 5♎ etc lol. I am so inspired. Your work is breathtaking..Many thanks Adrian From England.
Hello, Love your video, can you make a Sound system with at least 2.1 or more units, with both Radio Bluetooth, or plus wifi, and controllers on each individual unit, and volume none controls.
Hi friends! What do you think about design and sound quality of this speaker?
Do you sell or custom built these speaker box?
very nice design👍
Bác lấy loa này từ loa bluetooth nào vậy?
Unique, one of a kind
Authentic and cool design. 👍👍👍
This is the right way to transform something into a great art work. Not just putting drivers into broken refrigerators. Great
Nice build
Step 1: search for DIY videos
Step 2: get frustrated because you don't have expensive tools to make it
Step 3: repeat step 1
Correct 🤣
Every Goddamn Time
God damn right! This is DIY but not everyone cant do this =))
Cannot disagree with that
It is called do it himself. Not yourself.
Recycle- 100
Design- 100
Creativity- 100
Luxury handle-100
Material- 100
Damn, I was fall in love with the design of it.
Kênh UA-cam chất lượng nhất Việt Nam.
nice speaker..& wood
Bravo! Totally entertaining. Wish I could get hold of broken skateboards! Loved the build!
The line colors is blowing my eyes 😍😍
Очень классно получилось, автору респект и спасибо за видео. Удачи тебе!!!
Beautiful build, one of the best I've seen so far, and I've seen a lot. Few remarks: I would paint the back screw heads some different color, black doesn't fit, also i would put some pillow filling to dampen the bass, it sounds a bit hollow without it. I did not see an isolation power module between the bt board and the amp. as both amps share the same ground it must produce noise. All and all it is a great build that can sound even better with some minor changes.
Thank you!
sos un genio!!!!!! cuando sea grande quiero ser como vos Dios te bendiga!!
That’s a god given talent this gentleman has
_Very nice!! Some builders don't understand the importance of making their boxes airtight to get the full advantage of the Passive Radiators._
You are the only Bluetooth speaker builder with absolute perfection
Thank you!
super video
Simply incredible! excellent work, follower from Mexico.
fantastic design! absolutely piece of art...I love the fact that you used recycled materials keep it green man! :D
Thank you!
Can you perhaps make a video showing off your workshop? You have a really nice collection of tools. 🧰 🛠
I don't have workshop, i work on my garden because my house very small. Thank you!
King Minhvuong I understand. You are lucky you have good weather. Here in Europe you cannot work outside more than 3-4 months per year.
In any case, wonderful tools!
Amazing project!
astonishing wood craftmanship but mediocre audio electronics skils. the case itself is simply piece of art hats off sir
Thank you!
Finally you used a passive radiator.
_I'm glad he at least made it airtight when using them. Quite a few builders on YT don't understand the importance of making their boxes airtight to gain the full advantage of the Passive Radiators._
For me DIY ?? I DOUBT IT !!..Impressive work!!👏👏👏
Thích nhất kênh bác này với kênh bác Nguyễn Thanh Hải (TE) chuyên nghiệp.
!!!!!! ESPECTACULAR !!!! Un saludo desde España. Marco
awsome stuff bro wish i could have 1
Best bluetooth speaker build, your my idol, amazing (astig kaayo), great job high quality...from PHI
Well done boss. You are really a king of design
Jeebus, that's quite the battery pack!
Es simplemente bello! Exelente trabajo, me encanto las lineas de colores que dieron los skates y el sonido es impresionante! 👍🏻
This is super cool! It would be super dope if you made a new skateboard out of broken skateboards!
No one can denied that you are genius , excellent work.
Thank a lot
Great cable management 👍👍
Thank you!
You make the soldering look so easy!
My respect! Creativity in action!
*very beautiful*
SUPER
That battery pack is huggeeeeeeee though 😘
Complimenti bellissimo, bravo.
Muito lindo, trabalho muito bem feito, parabéns!
Well done
Bắt vít có long đền là thấy bạn tỉ mỉ .Bạn làm đẹp lắm,tất cả các khâu ngay cả dây rút
Какая весёлая "колонка". Лааайк.
Классно! Не болей!👍
Beautiful job... congratulations...
Thank you!
Fantastic! 👍
Awesome Bro.
Làm tâm huyết quá anh like
Super cool!!!
Que grandioso te felicito muy buen trabajo
TRABALHO MUITO BEM FEITO ACAMENTO 💯%
So beautiful 😍
Felling good
*Magnifique* 😍
I want one! It looks so good
Ideally all drivers should be mounted onto the same depth
Thank you!
@@KingMinhvuong Have nice day :)
Yes for the passive radiators
@@RuulOz No, for the tweeters and midrange/woofer/full range
@@RuulOz " phase shift that occurs when the speakers are not aligned properly. The back of each cone (where the dust cap is) should be aligned on the same axis. Otherwise, the high notes will reach the listener before the low notes. There are also possible problems with cancellation. " -quoting Michael LaLena (www.diyaudioandvideo.com/Guide/BuildSpeaker/)
Nice work
You Deserve 100 k likes.
Great new designs are welcome, bidet will be great if you introduce yourself
Thank you!
@@KingMinhvuong I'm watching you are very successful from Turkey
So awesome.
Thank you for being a member of my Facebook radio group.
Thank so much bro!
Beautiful!
I can buy this😍😍
Sorry i don't make for sale. You can buy materials in description of video to build one. Thank you!
Sweet work
Thank you!
Increíble 🔥🔥
I liked the video!
Thank you!
Anh Pham youtuber việt giờ thích english ghê :) tiền nhiều mà lại được nhiều người biết tới 😏
Wow tuyệt vời 👍👍👍
excellent, so proffecional
What camera you use to fil the video? And how you film correctly to the high of your hands?
Man you are real GOD with wood! This one is the best. Love the colors!
Cool !
Quá chất luôn a ơi
Красиво и толково! Би Кулл!
gracias por compartir...........
Amazing work
Hi from England. Your work is just mindblowing. IM NEW making and Electronics.
PLEASE could you help with a few questions.
Please can you tell me what the cutting tool is to make the circles for the speaker holes.?
Do you have the router bit sizes please and what kind for- 1) inner parts of the Holes of the speakers?
2) Round off the edges of the unit?
What Glue/Cement glue do you use to fix the none screw speakers?
With there being 2 switches-
1= Main Power
2= "Dual Switch".
So, Does the "Dual switch" power the 2 main speakers using setting 1, and when using setting 2, power the 2 main speakers and the subwoofer?
Are there no resisters needed when using preloaded boards?
What cable connections do you need to make the extensions from, from the board to their extended plug/connector/fitting?
(For example on the sound board you remove all the switches from the board. Then you connected some thin cables from those now vacant speaker turn knobs. What size would you need for those cables?) If it depends on ♎ can you say by how they increase such as a 3♎, or a 5♎ etc lol. I am so inspired. Your work is breathtaking..Many thanks Adrian From England.
Good job bro I like it 😃
Fantástico 👏👏👏
awesome, I like your videos and the way it recycles, keep it up ...
Amazing project congratulations
Thank a lot
JUST STUNNING WOW!!
Wow😍
Amazing skills...good job
Thank you!
Anh khéo tay quá làm rất tỷ mỉ
nice
nice speaker !
Master hermoso
Bonita y creativa
スケートボードのカラーボードを利用して綺麗なケースアイデアgood サウンドも最高にgood
Does a certain type of wood effected the sounds quality?
As always this speaker sound great and he is butiful.
Đẹp👍
Very nice video
👌👌👌👌
Keren.........❣️
you are really king...... dear....beautiful! Great work!......love from Lahore pakistan
Thank you!
@@KingMinhvuong welcome.
where from you dear?????
Impressive
công phu quá
Saludos desde Lima - Perú, excelente trabajo todo un arte y fomentado el reciclaje
After a long period.... anyway nicely built 👌👌👌
Thank you!
I love this channel! Very very very nice!
Hello, Love your video, can you make a Sound system with at least 2.1 or more units, with both Radio Bluetooth, or plus wifi, and controllers on each individual unit, and volume none controls.