Easy Way Sharpen Drill Bit Use Angle Grinder - FREEPLAN

#plywoodworking #Twistdrill #sharpeningdrill
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking
/ 479435482886643
/ plywoodworking
Easy way for sharpen drill bit use angle grinder with simple jig. Easy for build simple but have many impact for your work, i hate if my drill bit dull that why i build this jig for easy sharpen my drill bit
Subscribe and leave comment on bottom if there is any question or less obvious please leave it in comment field.
Hope you like it and don't forget to like, share and SUBSCRIBE...
Thanks
---------------------------------------------------------------------------------------------------------
Music Track:
Music Info: Ambient Cinematic Piano by DS Productions
Music Link: • Ambient Cinematic Pian...
Music Info: Acoustic Guitar Background by DS Productions
Music Link: • Acoustic Guitar Backgr...
Acoustic Inspiring Soft by RomanSenykMusic.
Acoustic/Folk Instrumental by Hyde - Free Instrumentals
Wondering - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-wondering
Music promoted by Audio Library • Wondering - Atch (No C...
------------------------------

[@jvmiller1995]

A friend of mine has a bowling alley and a proshop and drills 100's of balls a year. His bits have a #2 morrest taper and are carbide. About 3k for a new set. SO I/ had him get me a diamond disk I am going to put in the shopsmith then I can set the table and miter to the right compound angle. I am going to weld two pieces of ange one in a V about 2 inches for a tray to hold the bit the other will be at a 90% to blot to the miter and then weld to the V track piece. This way the small bits with a larger taper the taper will be held off of the table and away from the miter gage. Then I should be able to advance the quill direct into the flat carbide at the right compound angle to clean them up perfect.

[@plywoodworking]

thank you very much for the tips, i will try like you ask.

[@MCsCreations]

Fantastic work, dude! Really nice! 😃
I need to make something like that as well!
Happy holidays! And stay safe there with your family! 🖖😊

[@plywoodworking]

Thank you! Cheers!

[@jvmiller1995]

When using a push stick on a table saw you should place it close to the blade not the fence as it will push it into the fence if it tries to twist. If you do it on the side by the fence you can push it into the saw blade away from the fence. Not trying to be a troll and knit picking, just trying to help people that might be watching as well as yourself. This is a pretty good Idea.

[@plywoodworking]

thank you very much for good tips, correct me if i made mistake 😊

[@jvmiller1995]

@@plywoodworking Trust me I do not make videos because I would b called out the first time I turned on a table saw with no upper or lower guard on my shopsmith. lol Hell me just using a shopsmith would piss most people off. Lol But it is never bad to encourage others not to take short cuts or make mistakes. Looks like both of us still have all our digits. If 40 years I have only grabbed the 3/4 router blade once while spinning in a 3/hp. The wood working gods was nice enough to let the pad of my finger and thumb to grow back . More than some can say. I will check your channel out a bit deeper.

[@job38four10]

Be nice if there was a name of that grinding disc so I can find it...........

[@henryrossouw930]

Great jig.Did I look correctly that the degrees on jig is 22,5

[@plywoodworking]

Thank you very much, yes i use 22.5 for angle

[@ipsu8655]

screw facebook and webm

[@endjyra11]

perfect, thank you #1

[@plywoodworking]

You're welcome!

[@dallinostler4794]

What program did you use to animate and explode the drawing In the beginning?

[@plywoodworking]

3d max

[@alimazhar777]

Mahal mata gerindanya kayaknya?

[@plywoodworking]

Murah mas ini beli 45rb yg biasa klo yg bagus 70an

[@alimazhar777]

@@plywoodworking ada link pembeliannya
Atau apa namanya itu mata gerindanya?

[@plywoodworking]

Diamond wheel grinder nama barangya cb cri aj,klo linkya lupa udh lama beliya

[@luboskastro9496]

Jako brousíš menší vrtáky. Takhle velký nabrousím i v ruce

[@plywoodworking]

thank you

[@lightshine6044]

what's the grit on that grinding wheel? thanks

[@plywoodworking]

i really sorry, i forget about number grit but this is diamond wheel

[@marcvanderbeken2226]

I can't find de freeplan

[@plywoodworking]

thank you very much!!!

[@abdulghaniabdrahim6676]

Very accurate for shapen the drill bits I love it .

[@plywoodworking]

Glad you like it

[@HaiNguyen-vu9cj]

Thank you very much.

[@plywoodworking]

thank you very much!!

[@keupondestroy911]

Nickel merci beaucoup pour la vidéo

[@plywoodworking]

thank you very much!!!

[@c.mikelongo6628]

Thanks for the information!

[@plywoodworking]

Your welcome, thank for visit this channel!!

[@бубануха1]

Спасибо большое!!!! С Новым Годом! Здоровья, удачи!!!!!

[@plywoodworking]

your welcome, thank you for all support

[@dyanprenata9610]

Pesen 1 mas ed. Eheheh

[@plywoodworking]

Hehe udh gk trima pesenan mas

[@bricemathias6396]

Woow woow 😍💋 💝💖❤️

[@plywoodworking]

Thank you very much👍🏻👍🏻

[@mahmodawad61]

رائع

[@plywoodworking]

thank you very much

[@Serega_Siniy]

Спасибо Брат 👍🔥💯

[@plywoodworking]

Thank you very much👍🏻👍🏻

[@SER-spb]

Спасибо!

[@plywoodworking]

thank you very much