How to GET BIGGER FLAMES NOW

How to GET BIGGER FLAMES NOW
The proper sequence of turning on a propane fire pit using a 5lb propane tank is broken down into steps for you to follow. We go over the internals of the fire pit covering everything from the propane regulator to the burner. Don’t forget your air mixer, which is required on propane fire pits. In this demonstration we are using a match lit ignition system requiring a long neck lighter. If you are getting low flames on your propane fire pit then you probably are having one of the common issues we cover. The most common issue is that there is no key valve in line. This will cause the propane tank to go into limp mode which will make your fire pit only produce small flames.
🔥Propane Connection Kit🔥
starfiredirect.com/products/p...
-----------------------------------------------------------------------------------------------------------------------
🤔 Need design inspiration or help with a project?
Our Site ► starfiredirect.com
😎 Follow Us On Social:
Facebook ► / starfiredirect
Pinterest ► / starfiredirect
Instagram ► / starfiredirect
-----------------------------------------------------------------------------------------------------------------------
00:00 Introduction
00:21 Inside the Fire Pit
00:44 Lighting the Fire Pit
01:35 Low Flame Height

[@bargainbob4346]

I have a 36” ring using LPG 5 gal tank with low flame. The video mentions a larger ring can cause lower flame so what can I do ?
It’s using an air flow mixer and a 1/2-3/4” adapter. Thanks

[@danervin2530]

How does the hole size of the burner affect the size of the flame?

[@StarfireDirect]

On a fire ring, you don't want the holes too small or too large. If they are too small, the gas will have a smaller port to burn which means smaller flame. If they are too large, the gas will escape towards the source and the flame size will diminish as the gas travels further down the burner. You want the holes to be the right size where the gas can evenly distribute to all burner ports. For this, we typically suggest around 3/16" to 1/8".

[@danervin2530]

@@StarfireDirect I see, this makes total sense. Thanks for the reply!

[@bretunderhill]

What psi is that regulator?

[@StarfireDirect]

This particular LP hose is rated at 150k BTUs and has an Outlet Pressure of 11" WC.
Two Stage Regulator w/ 5' Hose
Flow Cap. 150K BTu/Hr Inlet: 25-250 PSIG
Outlet: 11" WC, 3/8" Hose ID
Inlet: Acme Nut Outlet: 3/4-16 UNF Nut