Thank you for saving my Architecture grade at 11pm at night every semester. Your videos are the most helpful on UA-cam and I don't know what I'd do without them.
Thank you Balkan Architect for your always nice videos. Honestly, I can say that you are the best teacher for all. However, I knew already Revit but not complete which you cover all those
Beautiful! this is the only youtube channel that explains revit in full detail. Thank you for your tutorials they helped me so much in my school projects.
Thank you so much, you’re channel is life-saver! Could you possibly do more videos on this topic as well as mass? These seem to be so complex and initimidating at times. Thank you in advance!
Thnks for this tutorial,i really use alot of inplace comp in my projects, but using wall category was something new to me, i would love to see more tutorial abt inplace comp. Which is better: inplace component or inplace mass
Nice tutorial but need in serial no for New Lerner should be helpful Please arrange it with serial number so new lerner learn step by step bacics to advance level thanks so much Sir
Thank you very much very helpful, when creating a model in place is there a way to move it up and down when looking at it in an elevation or section, can’t seem to be able to move it vertically sad😢
Thank you very much for your video, it's impressive! I have got a quiestion: What shall I do if I want to make a same 'flower' shape on another wall? Do I have to repeat the same steps from scratch to create another 'model in place' component or the 'flower' can be reused/copied? Thank you in advance, have a great day!
Hello, so I can place a component but it won't let me change the component to be any other type of model. How can I fix this? Is there something I needed to download to allow me to change the model?
With a large site development where the topo is all different levels and you have buildings plotted all over on different levels and floor heights, how do you create your levels? Can you create each building as a separate component or family and just add it in as a whole or you just model everything in one and have a million levels set up for each floor heights? thanks
Thanks for the video. I have a question, when i put a section line in generic model, the section not show all the lines. What did you think is the problem? thanks for your answer :)
@@Aj0nJon You must select the model then click on edit in-place then click on the object that is part of the generic model / model in-place and you will find material and finishes in properties on your left
@@mahmoudtarekx11 Wow, kudos to you man, I didn't expect such a quick reply :D I was insanely tired yesterday and somehow missed to do this, now I have my material working! Thanks again
Thank you for saving my Architecture grade at 11pm at night every semester. Your videos are the most helpful on UA-cam and I don't know what I'd do without them.
After 4 years , i couldn’t have said it better myself
Bravo kolega! Super su tutoriali i hvala ti puno, baš mi pomažu da što bolje savladam sve komande u Revitu. Najbolji yt kanal ikada.
You are the best explainer in UA-cam tutoring
I agree
Learned modelling in place and was the 1000th person to like this video. A happy day :) Thanks BA
Thank you Balkan Architect for your always nice videos. Honestly, I can say that you are the best teacher for all. However, I knew already Revit but not complete which you cover all those
Thanks BA! I have just started using model in-place components and found your video very informative.
You are amazing, I saw many vidoes in diffrent UA-cam channel. But not helpful. Realy I'm start learn revit with you and your vidoes in UA-cam.
Beautiful! this is the only youtube channel that explains revit in full detail. Thank you for your tutorials they helped me so much in my school projects.
i just started using revit and i would like to thank you for all your help. Your videos are very helpful and easy to follow.
thank you sir balkan
This was a good tutorial. I'm surprised about the lack of information for some of the more common revit commands (and how to apply them effectively).
Thanks a lot!
(New) Conceptual Mass
(New) Family
Place Mass
In Place Mass
Model In-Place.
I often get confused by all of them.
Thank you i didnt knw how to quantify a generic floor!!
Saved my life. Thanks
Thank you from Algeria
Thanks you chief architect!!
Thanks.
That clearly helped.
Thank you so much, you’re channel is life-saver! Could you possibly do more videos on this topic as well as mass? These seem to be so complex and initimidating at times. Thank you in advance!
Thank you Balkan!
Thank you sir it was very helpful... 🙂
Thank for this video, very helpful
Thank you very much!!
Thnks for this tutorial,i really use alot of inplace comp in my projects, but using wall category was something new to me, i would love to see more tutorial abt inplace comp.
Which is better: inplace component or inplace mass
Nice tutorial but need in serial no for New Lerner should be helpful
Please arrange it with serial number so new lerner learn step by step bacics to advance level thanks so much Sir
Great content here.
Tnx.. learned.. 👍🏼
nice, thank you BA
Wonderful
Thank you very much very helpful, when creating a model in place is there a way to move it up and down when looking at it in an elevation or section, can’t seem to be able to move it vertically sad😢
Thank you so much,how can change matrial after creating shape?
Nice channel
Sir please do a tutorial on making of Petersen Automotive Museum in L.A California please
How was the drainage done on that roof? Was it something other than applying negative slopes to the perimeter lines?
Thank you very much for your video, it's impressive!
I have got a quiestion:
What shall I do if I want to make a same 'flower' shape on another wall?
Do I have to repeat the same steps from scratch to create another 'model in place' component or the 'flower' can be reused/copied?
Thank you in advance, have a great day!
Thank you for this tutorial! i have to ask, can u calculate the cost of the models in place?
How can I convert a model in comp to a void form?
how to change the materials for object that was created on model in place?
Hi BA thanks for the video. Can you please state the difference between in place mass vs model in place
How come when you model in place generic models or any type you can’t join them together to get rid of the lines ?
Can we copy void extrusions to another wall in the same project?
Hello, so I can place a component but it won't let me change the component to be any other type of model. How can I fix this? Is there something I needed to download to allow me to change the model?
With a large site development where the topo is all different levels and you have buildings plotted all over on different levels and floor heights, how do you create your levels? Can you create each building as a separate component or family and just add it in as a whole or you just model everything in one and have a million levels set up for each floor heights? thanks
how to add lights to created components
Thanks for the video. I have a question, when i put a section line in generic model, the section not show all the lines. What did you think is the problem? thanks for your answer :)
I want schedule Quantities length breadth depth
Hey, is it possible to make individual lights “shine”. Example being; have the lights on the ceiling off and the wall lights on
Thanks.
In my revit LT, Model in Place i can't find, can you tell me brother, why? or how can I find it.
How to activation revit 2014
get into pc se new download kr lo crack k sath
Please create an Udemy course. Patreon payment system does not work in every country
A teachable website is in the making 😉
Hi, I can't add material on any generic model any solution? Thanks!
Sorry for digging this out but I'm having the same problem and can't seem to find solution. Did you manage to fix that?
@@Aj0nJon You must select the model then click on edit in-place then click on the object that is part of the generic model / model in-place and you will find material and finishes in properties on your left
@@mahmoudtarekx11 Wow, kudos to you man, I didn't expect such a quick reply :D I was insanely tired yesterday and somehow missed to do this, now I have my material working! Thanks again
@@Aj0nJon glad that it worked. Urw bro :)