Cheap and Simple Radio Control Making for RC Models. DIY RC 4-Channel
Вставка
- Опубліковано 18 лют 2020
- How to make a low cost 4 channel radio control for RC model aircraft, drone, cars and boats.
Construction of remote controls with proportional controls, which cost about 13-14 USD. It can be used for all kinds of model vehicle control such as model aircraft, drone, car, boat, tank.
Thanks for watching. If you want to support my channel, join.
/ @kendin-yap
Necessary materials:
2 x Arduino Nano
1 x NRF24L01 + PA Wireless Module
1 x NRF24L01 Wireless Module
2 x Arduino joystick
2 x 100uF Capacitor (16V or above)
1 x Min. 13 * 6 cm PCB Board
1 x 5 * 3.5 cm PCB Board
Arduino Nano: www.banggood.com/custlink/vvG...
Arduino Joystick: www.banggood.com/custlink/333...
NRF24L01 Wireless Modul: www.banggood.com/custlink/KGv...
NRF24L01 + PA Wireless Modul: www.banggood.com/custlink/33G...
20A Brushed ESC: www.banggood.com/custlink/D3D...
PCB Boards:
www.banggood.com/custlink/KmD...
www.banggood.com/custlink/3vG...
100uF Capacitor: www.banggood.com/custlink/DKD...
Headers:
www.banggood.com/custlink/m3v...
www.banggood.com/custlink/vG3...
Other materials:
SG90 Servos: www.banggood.com/custlink/Kv3...
20A ESC: www.banggood.com/custlink/mvv...
7.4V 450Mah 2S LiPo: www.banggood.com/custlink/KKK...
DC 180 Motor 39000 RPM: amzn.to/35rD8Ar or bit.ly/2L62JqC
3M Dual Lock Tape: www.banggood.com/custlink/K33...
Wire Stripper Tool: www.banggood.com/custlink/mDm...
Iron Soldering DANIU PX-988 90W Digital Thermostat Adjustable
ban.ggood.vip/RvRz
DIAGRAMS & CODE: tinyurl.com/ynj88zk6
Setup & Code Upload Tutorial: Arduino IDE, library files setup and code upload : • Arduino IDE Installati...
My Web Site (KendinYap): www.rcpano.net
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.
25 years ago, when i started in RC airplanes this was impossible to only think about! Today, micro-genius like you , with arduinos help, can do whatever you want! Great job! 😎✌️
i wish ı have rc airplanes
İm started 12 years ago im now 13
@@Emre-ff3xw 🤣🤣🤣🤣
@@Emre-ff3xw LOL
@@Emre-ff3xw kuch vhii🤣🤣🤣
Thanks a lot bro, you save my proyect, you are the first one to have a well explained code
Bro tell me how to load the code plzz bro
This is the kind of project I wanted to build back in 2004-2005 but never got the detailed knowledge on how to do it. Back then I was completely self taught and just a regular curious dude, without much access to the internet etc. Then later got into web development stuff and never really went back to electronics. But it's nice to see how it's done, also with new components like arduino and wifi module which back then wasn't quite easy to find.
Tnx for your reply 👍
Apakah ada jenis micro controller lain dari arduino ini ?
Pada saat itu anda menggunakan apa dalam pemrograman
This is exactly what I am looking for. Thanks
one of the different thinking tech youtuber you are.great effort.cheers.
That's what I've been searching! Thx
its,s work or not
Work
AMAZING pretty soon hoping to start up my soldering projects never soldered before love the challenge of creating stuff
Hello and thank you, You have opened up a whole new world for my rc projects. I am going to use what I have learned from you to convert some old Futaba radios to use Arduino rc Thanks to you Awesome job.
can I use brushless motor with this receiver, pls reply me.
Hocam Projelerin çok açıklayıcı ve bilgilendirici Emeğine sağlık
Terima kasih telah berbagi ilmu, semoga bermanfaat bagi orang banyak.
These days everyone is using costly flight controllers and stuff. Its fun to watch this implemented without required sensors and GPS...etc. Thanks for making this video, making people realize that a plane can be flown with basic curcuitery as well, fancy flight controllers are not needed :P Thanks again :)
Thanks to you I made my own ! the joysticks were trash so I bought a dead radio transmitter and used it's joysticks !
Ellerine Saģlık. MADE IN TURKEY
you lose vs Italy on first game Euro 2020, AND WE WONNNNNNNNNNNNNNNNNN WE ARE THE WINNER OF EURO 2020
Hmmm, nice!
Hai electronoobs
Hai electronoobs
@Renzo Guzzo why
Electronoobs I am asking you for a request and please help me. I want the code for the Arduino, please, not an order
@@MridulHasan380 vai apni ki eta try korechilen?
Thank you very much! I was trying to find cheap and good controler and reciever on arduino, your tutorial is the best
Simple if you understand electronics. I've got supplies for experimenting but my health caught up with me. Hands aren't any good anymore. All my fingers are out of place. I can still use them but it puts stress on my muscles and that causes toxins to build up in me. Doctors told me one day I'll be doing an activity and suffer catastrophic organ failure just simply fall dead where i stand. Kind of scares me doing anything foolish. I joked with my dad I'm going to be cleaning the toilet and fall down dead. Told him he'd have to put on my tombstone I was killed by a toilet. Not that I want to die anytime soon but I don't want to be killed by a toilet. Kind of sucks not being able to do nothing. Thanks for the videos. I do enjoy watching other people be creative.
Thanks man. Now I can complete my project . Thank you so much 😊😊😊😘
Its working or not
Türkiye’deki diğer UA-camrların aksine çok iyi projeler ve yaratıcı fikirlerle dolusun. Çok iyi bir kanalın var, tebrikler 👏🏻
سلام
quite noble adamın fikirleri yaratıcı
Чё чё?
@@user-xq9ou7pr6q я тоже все это прочитал и нихуя не понял
может через зеркало читать нужно XD
@@user-xq9ou7pr6q mal
Thanks bro ,it's really works I had tried
It is very cheap ..... Thanku bro 🥰🥰
Yine süpersiniz hocam. Tebrik ediyorum.
Mükemmelsin abi senden kalitelisi yok
I am suitably impressed.
Hearty and Rugged AF!! Nce work!
Excellent craftsmanship and soldering skill. Job well done :)
excellent! wish you success!
Nice and deep explanation thank you
Bonjour
Excellent travail bravo 👏 👍 👌
Thanks for this amazing project, I love your code too much. You are amazing.👍👍👍
Can you help me for the coding
I try in my android but it showing pls complete sketch pls help me
can I use brushless motor with this receiver, pls reply me.
This will reduce the weight of rc plane!! Thanks bro.
also saved me so much money!!
Does your transmitter work
Great job!
Eu sou do Brasil mas eu acompanho seus vídeos desde sempre acho muito legal vou até me inspirar nesse projeto
Hep yapmak istediğim şey ama hiç başaramayacağım. Ağzıma açık tüm videolarını hayranlıkla izliyorum. Teknolojiyi hiç bu kadar açıklayıcı görmemiştim. Başarılar dilerim
göründüğü kadar zor değil. konunun içine girdikçe kolay olduğunu göreceksin. biraz araştırdıktan sonra tek engel maddiyat olacak.
@@piekovski benim öncelikli engelim vasküler demans hastası olmam çok büyük sorun. Fizik konularında da çok iyi idim keşke Almanya'da yada Japonya'da gibi eğitim sistemimiz olsaydı ve benim ve benim gibilerin yeteneği ziyan olmazdı.
@@piekovski arduino proje seti aldim bunu yapmak istiyorum nasıl bir yol izlemem gerekiyor
Turker Candemir öncelikle başlangıç seti aldıysan eğer orada ki projeler ile pratik yap ondan sonra böyle projeleri yapmaya çalış daha da yardıma ihtiyacın olursa buraya yazabilirsin elimden geldiğince yardımcı olurum
@@merttas4886 hocam bu bağlantıların mantığını daha iyi anlamam ve kendimi geliştirmem için önerdiğiniz bir kanal veya eğitim platformu var mı ?
Superrrrrr 😊😊😊 ilkkk
Great jobs !!! For RC Plane, if you want to make it cheaper, you don't have to buy 20A Brushed ESC. Just add a Mosfet (for example: IRF3205), a diode and a resistor, then connect it to brushed motor. Of course you need to modify the receiver code. So, the Arduino control the mosfet using PWM. Cheers..... !!!
What will be the overall cost of this project could u tell pls?
Around 1500 INR
Cuman mosfet doang panas banget bro😅
HI sir, thankyou for your idea ,i made this as my school project and it works ,,thankyou sir
Esta excelente este video!!! 😍👏👏👏Sería lo más de bueno si también se le pudiera poner una pantalla con menú
Brilliant!! Well done and many many thanks for sharing this with us all on here. I love your videos and really look forward to them. I shall be making one of your plane builds soon and I will see if I can make it fly. Please keep these videos coming, they are so interesting and informative.
Many Thanks & Have Fun,
Joe
Thank you
guys,you say what I want
@@Kendin-Yap Hlo frnd if I connect the receiver to a flight controller like omnibus or anyother flight controller will it work friend???.Bcoz I am planning to make these for my project.
can I use brushless motor with this receiver, pls reply me.
Thanks it helped me a lot
That’s dope m8
I made a radio controller, your video was very helpful to me, thank you!
bro can u give code and cercuit diagram
@@rezaulhasan4858 ua-cam.com/video/f1z8Wvy56t8/v-deo.html
can I use brushless motor with this receiver, pls reply me.
Bro...
You opted for electrical engineering branch or which branch to learn all this
excellent project, I would like later a video implemented in an airplane to see the operation thank you very much
Thanks. I will make an airplane project with this remote.
@@Kendin-Yap plz can you do it with 6 servos.thank you nice project
Excellent project
interesting! :-)
hocam rc uçaklarda kullanabileceğimiz yarı porfesyonel diyebileceğimiz bir model daha yaparsanız cidden çok güzel olur
Hay bro thanks you... You cool 👏👏👏. Your smart n genius. Amazing very amazing project
You are super bro I have seen many videos to make it but I fail 5to8 times then I saw your video and I succeed YOU ARE MY IDEAL BRO ❤🎉🎉🎉🎉
It works or not
To do all this should opt for electrical engineering branch..
Or electrical and communication branch Please reply
It would really help if you released the unedited part without music and speed up with commentary/tutorial. Gives people more options and you cover the experiences people that understand at a blink of an eye what your doing and then for the newbies a solid background of what to think back on when I keep doing research. Hope I can make this work as you did thank you for the video
0:14 - the schematic
THANKS BRO FIRST I COULD NOT UNDERSTAND DIAGRAM THEN SAW YOUR VIDEO PART NOW I CAN MAKE MYSELF A MISSILE!
Nice job, will learn from you.
I am waiting for the plane from this remotcontrolar
He uploaded months ago a diy plane. Maybe they are combinables
Abi fırçasız esc yaparmısın el yapımı çok merak ediyorum
حقيقتا انت مبدع اخي. واحب ان اتعلم منك
Great project
Thanks for show us. For sure I'm going to try to do it. Which is the maximum range you have found this radio control has?
The theoretical range is 300-500 meters. Soon I will test this remote with a model airplane and publish its video.
Wating
Mano que legal achei top 😁👍
🇧🇷🇷🇺
I like the video very much
Wow..keren..saya mau mencoba membuatnya....mkasih banyak 🙏🙏
Untuk jarak jangkauannya berapa jauh??
Please make the plane of this transmitter and receiver fast
Hocam yaptım valla yaptım çok mutluyum kumanda çalışıyor , aşırı mutluyum tam 1 senedir bu projeyi yapmaya çalışıyorum para biriktirip malzeme tedariği sağladım 3 ay içinde Arduino kullanmayı öğrendim küçük projeler yaptım 1 ay sonra lehim yapmayı öğrendim sonunda kendi kumanda mi yaptım Allah senden razı olsun, kumanda alsam 400tlm gidecekti ve bir heves olup gidecekti sayende Arduino kullanmayı öğrendim ve 100 TL'ye kendi kumandami yaptım.
Lipo pil kullandın mı yoksa normal ucuz 12v luk pillerden mi kullandın
@@Biolumiverse ben kumanda da usb kullandım ama alıcıda ise 3s lipo kullanıyorum
@@veyselustundag7168 kumandada 2s lipo pil kullanmış biz 12v luk normal pillerden kullsak olur mu acaba lipolar çok pahalı
@@Biolumiverse 12 v klon Arduino ya yüksek geliyor mümkün olduğu kadar 10v gecmemeye çalışın , 9v pil kullanabilirsiniz
@@Biolumiverse 12 v tavsiye etmez bir çok kişi klon Arduino da yanmaya sebepmis
Great work
Bu kanal aşırı kaliteli
Abi merhaba.Devreyi kuruyorum ama çalışmıyor.Birde esc ti açınca ötüyor.
I didn't understand how to connect and solder them😢
lmao
Thanks for the video very nice project and sharing is good for people that cant do it as well as you 5 star
Excellent bro
Greetings from Mexico. Is difficult for me to find all the materials. It would be great if you could post a diagram using brushless esc and motor (seems these parts are very common in mx). I am very new to this and can't figure it out on my own, also, can see other people is asking for the same.
Thanks in advance.
You can use brushless ESC and motor. There is no need for a change for this.
Gracias por el video !!!!
Ojala encuentre en mi pais los componentes !!!!!
Super Sir Nice
Wah, mantap ini
çok başarılı bir kanal
Very good
Good idea ❤❤
Nice 👍🙂☺️.
keep it up bro
Thank you so much brother. Looking forward to make this whenever I get time. Your content is really amazing.
Helpful
omg i tried to do that and it worked
Thanks a lot
Bunu 2 kanallı RC araba için yaparmisin kumandası da RC car kumandası olacak şekilde çok güzel olur :)
Super 👍 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
awesome
Very grate
Thank you
Gooood jooob i like
Good👍
5 минут "полётов" на таких стиках...останешся без рук. Но в общем идея супер! Лайк полюбому
Well,Arduino can do everything, that's convenient.
Cheapest and simplest arduino controller I have seen so far (Y)
Hey, amazing video!!
I was wondering if it is possible to use my laptop keys as the servo controller. Use a wifi antenna as the receiver and the Arduino and wifi module as the transmitter. If possible could you elaborate a little?
Yeah it's possible
Keşke malzeme listesi linkleri koysanız da bizde aramasak
Çok güzel video teşekkürler
Can this be integrated into an RC toy car? Say for upgrading transmission connection or simply replacing the stock remote controller with this one.
can't you use something like a NODEMCU module that have both a computer and wifi antenna?
just asking because that is more confined.
Cool
Harika 👌
جزاكم الله خيرا اخي الكريم 😂
Daha önce yapmış olduğunuz çift motorlu botta bu kumandayı kullanmak için neler yapmam gerekir yardımcı olur musunuz? Sadece yazılımsal değişiklikler yeterli olur mu?
With this setup is there a way to detect and disconnect/send warning, when the liPo (either in remote and motor) is reaching damaging discharge of about 6V?
For remote I would just add lipo protection board, for plane same. If you want to get signal from plane, you should use same RF chip, as in remote, and then give led to blink, ar even better add OLED 0.96 screen on remote.
i suggest to use a 3.3v voltage regulator to the NRF24, the arduino regulator is not enough, that's why it hadn't enough signal range when u tested it