I didn't take them apart much, but when you understand the essence of the mechanics of a sewing machine, it's not a big problem, continuation of the restoration: ua-cam.com/video/l9xDLEdAwx0/v-deo.html
Thank you, as I stated in the description of the video, the next series of 4 videos will determine whether I stay or leave permanently, I noticed some strange algorithm on youtube, logically the number of views should increase with the number of uploaded videos, but it doesn't happens UA-cam has some strange algorithm, increasing the number of videos does not mean increasing the number of views at all, which has no logic whatsoever. Thanks again and I'm glad you're watching us.
Awesome! Can you give me the dimensions of the two belts please? I have to replace them on my 530-2, and hope to be as close to previous as possible. Thank you for your answer🤗
2 problems- the ornamental stitch selector (9 in machine book) and the needle displacement lever(13 in machine book) are not moving at all. how can I make them move? the machine works really good
Positions: 9-ornamental stitch selector, 13-needle displacement lever; It is most likely that the mentioned positions are stuck due to old grease and corrosion, use sewing machine oil, wd40 type spray agent as well as heating with a hair dryer, heating partially melts the old grease. Only a qualified technician can take it apart, thoroughly clean and lubricate it. The mentioned problem is a very common occurrence with old Bernina sewing machines.
@@MasinskiKutak thank you!! where to put the oil- on red spots of oiling, or behind the needle button? and where to clean for 9-ornamental stitch selector? I opened top cover, machine was clean, I clean more and oiled it, what else?? thanks you very very much, I don't have any service 2 hours driving from my location. thanks again! I took care of many singer and brother machine and I have a good hand.
Hello, I have a bernina 1130 and the motor is not longer working. After checking the motor I have verified that the motor is fine. I am stuck on the transformer, do you know which part of the transformer may be damaged or does it have the schematic board? Thank you
I can't find the section where I can see or buy the instructions to see the schematic of the Bernina 1130 transformer. I bought the 1130 service manual and also the 1630 service manual and in both is a page where it shows the transformer but only 5 components are specified, it doesnt help to much. I would need the schematic where it explain what function each component has so there is an opportunity to repair it. I hope you can help me on that. Thank you!@@MasinskiKutak
Unfortunately, it's hard to help, I looked through this service manual and in my opinion it doesn't have anything useful for you: www.pinterest.com/pin/375206212722072517
Wow. This is spectacular! 👏👏👏
Thank you very much, the next video is to be even more 'spectacular'
@@MasinskiKutak I'll definitely check it out!
ua-cam.com/video/tx2YsYyTKjE/v-deo.html
Wow, that was so interesting. I loved it. Thanks for sharing. I can’t imagine how many you took apart to become so efficient. Well done!
I didn't take them apart much, but when you understand the essence of the mechanics of a sewing machine, it's not a big problem, continuation of the restoration: ua-cam.com/video/l9xDLEdAwx0/v-deo.html
@@MasinskiKutak I'm looking forward to watch the whole series. I will get my first Bernina 530-2 this week. Your series will be very helpful.
Quite s few months no clips have released from you. Thanks and Welcome back.
Thank you, as I stated in the description of the video, the next series of 4 videos will determine whether I stay or leave permanently, I noticed some strange algorithm on youtube, logically the number of views should increase with the number of uploaded videos, but it doesn't happens
UA-cam has some strange algorithm, increasing the number of videos does not mean increasing the number of views at all, which has no logic whatsoever.
Thanks again and I'm glad you're watching us.
ua-cam.com/video/tx2YsYyTKjE/v-deo.html
Thank you for this video. Great to learn from.
Thank you for watching and sharing our videos
ua-cam.com/video/tx2YsYyTKjE/v-deo.html
Awesome!
Can you give me the dimensions of the two belts please? I have to replace them on my 530-2, and hope to be as close to previous as possible. Thank you for your answer🤗
www.masinskikutak.com/2021/09/bernina-drive-belts-bernina-motor-v.html
2 problems- the ornamental stitch selector (9 in machine book) and the needle displacement lever(13 in machine book) are not moving at all. how can I make them move? the machine works really good
Positions: 9-ornamental stitch selector, 13-needle displacement lever;
It is most likely that the mentioned positions are stuck due to old grease and corrosion, use sewing machine oil, wd40 type spray agent as well as heating with a hair dryer, heating partially melts the old grease. Only a qualified technician can take it apart, thoroughly clean and lubricate it. The mentioned problem is a very common occurrence with old Bernina sewing machines.
@@MasinskiKutak thank you!! where to put the oil- on red spots of oiling, or behind the needle button? and where to clean for 9-ornamental stitch selector? I opened top cover, machine was clean, I clean more and oiled it, what else?? thanks you very very much, I don't have any service 2 hours driving from my location. thanks again! I took care of many singer and brother machine and I have a good hand.
Hello, I have a bernina 1130 and the motor is not longer working. After checking the motor I have verified that the motor is fine. I am stuck on the transformer, do you know which part of the transformer may be damaged or does it have the schematic board? Thank you
www.masinskikutak.com/2021/09/bernina-service-and-adjustment-vintage.html
I can't find the section where I can see or buy the instructions to see the schematic of the Bernina 1130 transformer. I bought the 1130 service manual and also the 1630 service manual and in both is a page where it shows the transformer but only 5 components are specified, it doesnt help to much. I would need the schematic where it explain what function each component has so there is an opportunity to repair it. I hope you can help me on that. Thank you!@@MasinskiKutak
Unfortunately, it's hard to help, I looked through this service manual and in my opinion it doesn't have anything useful for you:
www.pinterest.com/pin/375206212722072517
Thank you really much for your reply. You are doing a fenomenal job@@MasinskiKutak
Bernina Record 530-2 parts diagram:
www.masinskikutak.com/2021/09/bernina-service-and-adjustment-vintage.html