How to Heat Press Full DTF Transfers without Leaving Marks
Вставка
- Опубліковано 17 лют 2022
- If you're not familiar with using a heat press, especially on darker garments, the shirt is very sensitive to heat and will create heatpress lines if not done properly. In this video we teach you how we heatpress onto the front and back at the same time without creating any burn lines. You'll get a professional press every time!
Order Your Heat Transfers Today:
www.transfersuperstars.com
----------------------------------------------------------------------------------------------------------------------------------------------------------
Heatpress Pillow
amzn.to/3gioPbb
DTFPRO Film
dtgpro.com/cicproduct/dtf-pro...
DTFPRO Inks
dtgpro.com/cicproduct/dtf-pro...
DTFPRO Adhesive Powder
dtgpro.com/cicproduct/dtg-pro...
DTF Printer Cleaning Supplies
Printhead Cleaning Solution
dtgpro.com/cicproduct/dtg-cle...
Printhead Cleaning Solution (Strong)
dtgpro.com/cicproduct/dtg-xtr...
Foam Swabs
dtgpro.com/cicproduct/dtgpro-...
Syringes
dtgpro.com/cicproduct/dtg-ink...
Order Sample Pack
form.jotform.com/213566995088170
Google Review
g.page/r/CTcIkuv_pMlKEAI/review
Like us on Facebook
/ transfersuperstars
Review us on Yelp
www.yelp.com/biz/transfer-sup...
Instagram
/ transfersuperstars
UA-cam
/ @transfersuperstars
TikTok
/ transfersuperstars
Linktree
linktr.ee/transfersuperstars
Thanks for thr video, are we supposed to see the fibers ofnthenshirt come through like vinyl does? Because i see a bit but it looks more smooth than fibrous
It was helpful. I learned about heat press pillows. Thanks. What size did you use?
Thanks for the pointers, great informative video.
Glad it was helpful!
Answer question about flickering?😅
How would you advise to put the settings when printing on 80% cotton/20% polyester outdoor jackets? We tried at 300F 15 secs but transfer came off.
Some of the outdoor jackets have a waterproof coating that makes it like a Teflon nonstick characteristic, so transfers won’t stick to it. Did you ever find a workaround for the job?
Would you recommend 20 seconds at 300°? Or what does heating it twice do?
300f at 7s. 20s is too long and may burn the fabric. Heating it twice makes sure the transfer is embedded into the garment
Dtf Sticker is it must mix with powder then melt them into oven?
Its not a sticker, its a waterbased transfer. We melt powder to create an adhesive backing.
what's that you put inside the shirt the brown one?
its a heating pillow
where did you get the padding you put in between the shirts?
We have links in one of our newer videos
amzn.to/3gioPbb
How many seconds did you put for each?
We pressed for 10s at 325F.
Hi, Where did you get the plastic transparant thing you use for centering the dtf.
At 1:08minute.
Very helpfull it seems
Keep up the good work buddy, you’re a blessing for every beginner!
We have a list of products from amazon we use in our description.
just look for a heatpress alignment tool on Amazon
Where do you get the heat pillow insert?
We picked it up on Amazon, here is a link to a set. amzn.to/3TaUAUM
I tried to print a 100% polyester sweatshirt in the press but unfortunately you can see the signs of pressing, how can I solve it?
use a heat press pillow to cushion the heat press imprint.
Are your videos supposed to flicker in the middle of watching it? Watched 3 vids now and 2 out of 3 have flickered
What’s the name of the heat press that you are using? Thanks
In this video its the Geoknight, In the other videos its the Prisma. Both available on our website. www.transfersuperstars.com/collections/heat-presses
I’d like to see a poly/nyoon Coach jacket video. Those buttons are thicker than the zippers.
you'll need a heat press pillow or platen to avoid breaking the buttons when heat pressing.
is it me or the video glitched lol
Your video glitched and your web site only delivers to USA so bad and unfortunate for people of PR or others