Finally got the truck back & Maddy checks under the hood
Вставка
- Опубліковано 1 жов 2024
- Welcome back to another video guys!
Mudflap link (Completely free to use): dashboard.mudf...
Grab some Milk Man stickers:
shop.themilkma...
Dash cam that I use:
amzn.to/3DkRBP9
Check out my website: themilkman.us
Send me an email: alec@themilkman.us
When you know the width of the space, (usually 12’) don’t worry about the blind side, just concentrate on keeping the trailer close to the line on your drivers side and you should be ok until you get back beyond the apex of your turn. Then it’s time to pull forward and realign the trailer , and open the doors. Good luck 👍!
To all that watch like this comment so Alec will do a live stream again. We all loved them help me out to guilt Alec into it.
Looked like maddy was doing ballet trying to get that hood up
you should do the wooden pieces on your dash white to go with your white theme
Mines was cutting out my battery post were loose
cutting out could be cam position sensor. my w9 6nz would cut out on start up, new cam position sensor fixed it. cat says sometimes there are 2 cam sensors depending on the model
What's up
Hi
what's up man me and my friend say u at a truckstop lake Mills at a kt parked all crooked. we got a company outta Kansas city. we watch u all the time but I just now subscribe now. we just bought our own truck gonna fix it up. it was exciting swing your truck. I like watching your videos.
You rebuild it you should paint the motor purple and black to match if you end up repainting the truck white so it would be alittle purple black and white inside and out
That would look good
Maddy gets an "A" for the effort.
Have them check the thermostat’s that could be a problem with it getting hot quick
Good to see you’re back uploading ✌🏼
Thanks. Interesting video.
Stay Safe
What violations are you worried about with your paper logs?
Milk Man make sure your air cleaner cross over pipe is not resting on the valve cover, it will rub a hole in the pipe
3.95 at the truck center in Scranton Pennsylvania
Crank shaft/cam shaft sensor
I was going to say cam sensor. I had one that did that on an OBS ford, would die at low rpm and cut out intermittently at speed and scare the crap out of me.
So u drive by my place and didn’t pick me up ! I need a vacation!!!
It's nice to see a video from you again. keep it on.
if you get paranoid why not stop and get out and look ?
Nice to have you back on the road
Good afternoon. Question. Have you ever thought of repainting the trk???
Of course he has but painting a truck is like 10 to 15 grand unless you do it in the driveway.
@@chopplolo72 oh wow thats alot. I understand
The mack i use to drive did that. Where it would cut out then come back. Took it to a garage and they changed a sensor on it and that cured it. Hopefully its something simple like that with urs. Keep on trucking brother
Big 10. It hasn’t done it since that video. Just one of those weird things that happen and then disappear I guess
@@TheMilkMans sometimes mine would go months b4 it did it again but got worse over time so went ahead and got it hooked up to a computer to see what was going on
Hi watching you from Saudia Arabia.Good you back
Great video Milk Man
👍😉
Is that a 2ws cat milk man ?
If it ain’t rough it ain’t right KEEP ON TRUCKING DONT LOOK BACK
Hello Maddy 👋
im sittin at Rochelle Americold right now
They are soooo slow. Left dem in pa this morning
@@JMAC-rs6ey dropped off and then reloaded right back out of there. 7 and 1/2 hours
Milk Man this one of my favorite UA-cam truckers to watch you have great content keep it coming love the videos
Good video buddy 👍🏼
Facts
Saw you rollin on 90 by Albert Lea couple days ago, bad ass looking truck
I live in st cloud mn. Thank you for your content. I like it alot.
Sounds like possibly a bad spot in the engine harness or cam position sensor could be bad
that sounds about right my poopy paccar fans turn on at about 220 coolant temp but with the ac on it sits about 180. havent had a issue yet
i use the same keep Trucking app freedom of the open road👍👍
Guess you gotta get a bigger sleeper there drivah......
What do u use to mount your camera on the side
What happened to your frieghtliner
Is the cut out issue happening while using cruise control?
do you still drive your other truck
Parts for those 🐱 engine's are not cheap..
i still see ya doing yu thing stay safe yu too yu know who ohio voodoo
Milkman do you use a diesel fuel additive to get good mileage?
Does dot give you any griff for not using paper logs
She need to eat her wheaties
Rackittttty Rackittttttty……Rack.. RAACK lol
That’s pretty cool on the KeepTruckin app do you keep in manual mode or something?
Just download the app and use it don’t get the in truck system that’s what I use also and it’s free to use
Hey Maddy V
Question for you , with the elog not being hooked to the truck, can you go back and change things or is it set and recorded ?? I’ve never had a elog, always paper.
Yes you can go back and change things. Up to like 8-9 days I think. Just hit the edit button 👌 no having to count log sheets or worry about one rearing it’s head when they decide to take a look inside the truck 😂
@@TheMilkMans : ok. I might check into one. The paper is a pain sometimes. Thanks.
@@scottberry5266 I just put it on my phone. Don’t even have to have a tablet. Something to consider fs
@@TheMilkMans : oh ok. Like I said , never had to do elog always been on paper or nothing at all. I’ll check it out. Thanks.
🖖Keep up the great vids man, we all love e'm. The Milk man is back on route 🎯
I'm 17 new but in the future I'm gonna start driving a large car
@Monty thx, I like n14 cummins better
Hell yeah!
@Monty same here, but don't know much about the isx-15
@@TheMilkMans thinking of hauling cattle or flatbed
@Monty ik they're emissions motors and they can be deleted but don't much other than that lol