Holy hell! Thank you! I tried finding just a simple no fuss way to make this cut for framing a window and this did it without all the blah blah bs from other videos. Straight to the point
Finally! 👏 👏 👏 👏 Someone that has actually put a video saying handy trick, actually uploads handy trick for angles video! Everything else sooooo complicated, tools needed and mathematics, which I don't have😅
Thos were some clean jump cuts lmao. So we wouldnt have to see you hacking those peices with that saw. Just saw 1 sec, pause recording, saw all the way through but keep peices looking like there still connected, start recording and pop peices off like it only took a momment. Very nicely done lol.
Yeah he lost all credibility with me. Why not show people that its going to be lots of sweat equity or money in tools in order to do any type of project requiring lumber. Any! In fact, the smaller the project, the more expensive and precise you and your tools will need to be. Precision requires precisely tuned tools or expensive powertools. You should unlife your real life profile for tricking people
@Adrian-vd8rm yea as someone who works with wood and does wood lathing and carpentry. I would never hide the fact that its not easy, its time consuming, its sweaty, not to mention the cleap-up afterwords lol. So much sweeping and or vacuming.
@@Flipp0022 im constantly sweeping, its never ending. Constantly unclogging my shop vac, my poor robot vac wants to delete his own system files if you know what i mean 😅
Will this method work with finding out other angles? There's a closet i am doing but the angle is less than 45. The closet corners are more rounded out and not your typical 90 degree corners
As someone who does woodworking as a hobby, what's disconcerting is how many are missing the mistake and the problem that joint is going to face when you put it all together. But sure, if you want a no fuss means of putting a frame together, this will work, just won't be very clean and you're highly likely to face issues when putting it all together.
writing that X is stupid. you already have the line. this isnt looney tunes. where if you didnt put an X and cut a tree branch instead of the branch falling the earth and the rest of the tree falls.
Thank you for this! ❤ Everything I found was ridiculously complicated!
Thank you so much I have been looking for a easy way make this cut, wow🎃
Thank you. No 9min video wasting out time. Just short and direct. Great job!
Thank you ! Simple and clear
Holy hell! Thank you! I tried finding just a simple no fuss way to make this cut for framing a window and this did it without all the blah blah bs from other videos. Straight to the point
Thank goodness I finally got it! 🎉
I've searched relentlessly to find a way of doing this that doesn't mean I've got to take out a loan for tools
Thank you so much
Finally! 👏 👏 👏 👏 Someone that has actually put a video saying handy trick, actually uploads handy trick for angles video!
Everything else sooooo complicated, tools needed and mathematics, which I don't have😅
Thx for sharing yr way is much easier thx again
Thank you so much... from those of us with few tools
Oh my God I’ve been looking for some thing to make this a lot less complicated. Thank you so much.
Congratulations, you've made a 45 degree joint. Haha
How to cut a perfect 45° mitre with a hacksaw. Surrre!
Tks good job
Cut was done elsewhere by machine. I wonder anyone could cut the wood so perfectly. Vedio editing!?
Kattakon rahmat usta aka 😊 örganib oldim
Perfect I can’t say anything else
Let me save this video 😂 thank u!
Melhor explicação que encontrei na net. Fácil e objetivo
Thank you very much for this. Merry Christmas to you and yours
Genial, acabo de hacerlo y quedó exelente 😊
Thanks for shearing! Great work!
Duh!!! They have these things call a SQUARE. Hacksaw my arse.
Use a combi square and a proper tennon saw not a hack saw ..
He didn't sawed that by hand.
Thos were some clean jump cuts lmao. So we wouldnt have to see you hacking those peices with that saw. Just saw 1 sec, pause recording, saw all the way through but keep peices looking like there still connected, start recording and pop peices off like it only took a momment. Very nicely done lol.
Yeah he lost all credibility with me. Why not show people that its going to be lots of sweat equity or money in tools in order to do any type of project requiring lumber. Any! In fact, the smaller the project, the more expensive and precise you and your tools will need to be. Precision requires precisely tuned tools or expensive powertools. You should unlife your real life profile for tricking people
@Adrian-vd8rm yea as someone who works with wood and does wood lathing and carpentry. I would never hide the fact that its not easy, its time consuming, its sweaty, not to mention the cleap-up afterwords lol. So much sweeping and or vacuming.
@@Flipp0022 im constantly sweeping, its never ending. Constantly unclogging my shop vac, my poor robot vac wants to delete his own system files if you know what i mean 😅
Respect for what you show here make g peoaple live easy 💯
This is so unnecessary do people not know what a speed square is or a miter saw I don't understand
So, for those who don't have a miter saw??? Lol.
Wow this is great
Sir small wooden box place explain..measurements...
FREAKIN OUTSTANDING
Omg you make that so much harder than it is..😅
Thank you thank you thank you!!!!!😊
Can i get that saw it was faster than the jigsaw
Hacksaws on table but no sawdust or mark on table surface? Unlees you are a genius with a hacksaw impossible to get such an accurate cut.
You can see the video jump lol
Will this method work with finding out other angles? There's a closet i am doing but the angle is less than 45. The closet corners are more rounded out and not your typical 90 degree corners
Wood name?
Thanks
Merci de la France 🎉
Thank You 🥰🙏
But what about the bottom cut? I get it wrong.
I learned how to do this when i was like 4 or somethin'
Then you should’ve posted the video 😅
Thanks
Thanks
Thanks
Dustless wood??? 😳😳
New update
Pick yourself up a speed square, they're cheap and saves you time.
Ah yes, math. I'd give it a light sanding too so its a bit cleaner
🎉
thank you for this
Thank you ❤❤
As someone who does woodworking as a hobby, what's disconcerting is how many are missing the mistake and the problem that joint is going to face when you put it all together. But sure, if you want a no fuss means of putting a frame together, this will work, just won't be very clean and you're highly likely to face issues when putting it all together.
Explain
thanks a lot
Love the music
What's with the pencell marks on the finished wood?
My miter saw does a great job
That is of course mathematically correct, but relies on end cuts being true 90 degrees
Nice 🤌 Thanks
help me a lot❤
Thank u
Good
Bravo
Tq bro
Он МАГ, он совершил чудо.
Mantap 👍
👏👏👏
🎉🎉❤❤😮😊
I hope you don’t do this every time.. but I’ll allow you to learn a better known way to do it
permit save share
Perferct
So eeeee z
Gawd. That's it? So why all the confusing drama from other vids?
I doubt the angle of the cut would be nicely 45 degrees.
Thank you po
writing that X is stupid. you already have the line. this isnt looney tunes. where if you didnt put an X and cut a tree branch instead of the branch falling the earth and the rest of the tree falls.
music name??
Hectorino Martinez - you say
@@gabrielcortes7352 thank you ❤
@@Nhquangr2006 YOU WELCOME 👍🏽👍🏽👍🏽
Ajá!!!!
El video se interrumpe justo en el corte creo lo haces con maquina.
Pfff, common sense, for those that got your mind blown by this are not intelligent.
Comments on here 😆 🤣
Man 90 angle
Want 38 degree
angle Nahi Kahate😡
Do GROMU , Jestem
What's???
🤦
Thats 90 degree not 45
It's a 45 degree cuts for each board. Put 2 together makes a total 90. It's a tutorial for cutting
👎🏼👎🏼one piece was off by like 1mm 🤣🤣nononono no good
was I supposed to learn anything, because that's so obvious