Drain the grow on, then make a clean "frame" with making tape in board of the liquid liner, CT1 behind the flap of LL up to the tape, wait 10-minutes or so and gently peal off the tape, this should glue the flap down and seal the rest of the liquid liner around the window- Regards steve
To be honest Jamie when buying a young yammy you really need to look for one that is as pale as you can get it as they darken as they grow if you get a really yellow one the same age it will turn a dirty yellow in a short time and not look pleasant at all 👍
Oh Jamie, I'm just gutted for you my friend. If it were me, if it's not leaking, I would do what you suggested. Drain it a little, cut the flap off, and call it good. If it's only not sticking in that area, not leaking, then remove it and wait to see if the rest will remain adhered to the pond. You might get lucky with no further issues. If it's not leaking, it's not broke.....if it's not broke- don't fix it. That's what they say anyway 😅 Good luck sorting it out. Wishing you the very best going forward. ❤
Gosh I hope you get it sorted Jamie!! 🙏🏻 Fish look happy as ever in there!! 😊
Yeh they did let's try 3rd time lucky hey 🤣
i hope you get it sorted mate. great shout on the blue bowls ish. 👍
Thanks bud appreciate it 👍 and yeh I thought they were a bargain And tough as old boots will last years 👍
hope you get it sorted buddy
Thanks me duck hope your doing well
Hi Jamie we bought one of the blue crates it's really good quality, hope you get your pond sorted 👍👍
I hope so too! Yeh there great bits of kit ain't they 😊👍
Can you get a bit of CT1 behind the flap and stick it back down ?
Unfortunately not that was the plan but the whole liquid liner peeled away 😢
Drain the grow on, then make a clean "frame" with making tape in board of the liquid liner, CT1 behind the flap of LL up to the tape, wait 10-minutes or so and gently peal off the tape, this should glue the flap down and seal the rest of the liquid liner around the window- Regards steve
Thanks Steve unfortunately after draining it pretty much the whole liquid liner peeled off 😢🤣
really sorry mate, we've all been there! If it was me I would use silicone or ct1 behind the flap and hope it re-seals it.
That was the plan until I drained it the whole liquid liner peeled off
My word mate you aint had much luck with that pond mate
Nope not at all 😕
Drain it. Cut and peel the liquid liner from around the window. CT1 all the way around. Job done 👍
Unfortunately the whole liquid liner peeled off when I drained it 😪
To be honest Jamie when buying a young yammy you really need to look for one that is as pale as you can get it as they darken as they grow if you get a really yellow one the same age it will turn a dirty yellow in a short time and not look pleasant at all 👍
Yeh that's why I have the really light clean lemon coloured one as I was aware of this anyway 😊👍
Gutted for you mate, is this what u told us about at the national?
Yes bud just peeled off 😢
Get some black CT1 or some Ms 300 not the liquid line and cover where it has peeled away
Yeh that was the plan till I started doing it 🤣😢
When will the nightmare of this grow-on end Jamie… 🤷🏼♂️
I’m sure the next fix will be for good… 🤞🏼 👍🏼 👍🏼 👍🏼
Perhaps try a boxweld liner now… 🤔
Yep that's the plan now 👍😊
Jamie its not leaking ! If it’s not broke don’t try fixing it.❤
I couldn't leave it like that as waste could get trapped in there or fish 😅
Oh Jamie, I'm just gutted for you my friend. If it were me, if it's not leaking, I would do what you suggested. Drain it a little, cut the flap off, and call it good. If it's only not sticking in that area, not leaking, then remove it and wait to see if the rest will remain adhered to the pond. You might get lucky with no further issues. If it's not leaking, it's not broke.....if it's not broke- don't fix it. That's what they say anyway 😅 Good luck sorting it out. Wishing you the very best going forward. ❤
Thank you unfortunately it wasn't that simple in the end 😕
Did u key the topcoat up before u ms300 ? Might be delaminating from the wax in the topcoat
I think you've hit the nail on the head there I didn't I cleaned it with acetone but didn't sand it
Black ct1
Unfortunately the whole liquid liner peeled off when I drained it
Mate your not having much luck I wish it changes for you
Thanks bud things are finally starting to look up now 👍
Lol with all the money spent by now you could have paid for a box weld liner and been done with it 😂😂
Yeh tell me about it well that's the next step now 😒 3rd time lucky
Really not ideal 🤦🏻♂️ if it was me, I would just cut away that section… if it’s not leaking there, perhaps it’s not an issue?
Unfortunately when drained the whole liquid liner peeled off 😒
I feel for you Jamie wish I could help don't get down these small things come to try us 🐟🐟🐟🐟
Thanks Carol yes they certainly do 😅
Gold label (black) might sort that
Yeh if the whole liquid liner hadn't peeled off that's what I would have done although with proper ms300
i would just drop a box weld liner in like you said quick and easy
Yep I think that's the plan 👍