Great video dude! I rebuilt my head when I replaced my head gasket an now the truck is running great but rattling like crazy now that I saw you video I know why. All my rockers are locked up
Can you do a video on the disassembly of one? Also, are the good ones those that are springy and the bad ones are those that are not? Or is that because during disassembly the oil drains out of some and will not be springy until the get re pressurized with oil again?
I can certainly do a disassembly video, although I can say most of it is going to me cussing and fighting with that little retention ring, its a complete PITA to remove. But also, its because the lifters are not designed, nor is it recommended by Nissan, to disassemble them. They are non serviceable. I took this one apart to try and determine the cause of failure. "Failed" rockers on a SOHC KA are ones that collapse and do not rebound/re-inflate/spring-back/ are stuck. Ones that do not collapse are filled with oil, since they are hydraulically adjusted by oil pressure. You can squeeze the oil out and they will then be springy. The one in this video was a stuck lifter. It was fully collapsed and would not extend out. This is sally because trash of some sort has scared up the lifter bore and hung it up. Ill try to do a comparison video in the next week. Thank you for the question
When to the wrecking yard to pick up some rocker arms how to i know if their bad? Or good?? Found a set that had no play on them when installed but when i took them off the head the little plunger on the rocker are very stiff. Is that normal?
I’m sad to see you never got around to that second video I guess I will cuss the retainer blindly !!! I have cleaned mine best I can and they still flat so something’s got to give
Like you said, very little info on these available. Thank you so much! So after you clean them, are they still usable?? And do you uave trouble get the air blead back out for use? Thanks again.
I am not planning on reusing this particular rocker at this time. I have several sets and the set that this one came from had multiple that were stuck/bad.
el autor esta explicando que el video solo es para demonstrar como funcionan los lifters y por que se atoran ya que no no hay videos o instrucciones que pudo encontrar en internet. y en sus respuestes en los comentarios tambien recomienda no volverlo a usar y mejor comprar nuevos
Great video! I now understand how the KA "lifter" works and the cause of the dreaded rocker arm knock.
Awesome investigation and Thank you for sharing your insight on how it works.
Great video dude! I rebuilt my head when I replaced my head gasket an now the truck is running great but rattling like crazy now that I saw you video I know why. All my rockers are locked up
To easily diagnose rod knock, just disable spark on the offending cylinder with engine running at idle. If knock goes away, it’s the rod.
Awesome video man, I'm hoping to take mine apart this weekend.
wth? whats the method to disassemble?
Can you do a video on the disassembly of one? Also, are the good ones those that are springy and the bad ones are those that are not? Or is that because during disassembly the oil drains out of some and will not be springy until the get re pressurized with oil again?
I can certainly do a disassembly video, although I can say most of it is going to me cussing and fighting with that little retention ring, its a complete PITA to remove. But also, its because the lifters are not designed, nor is it recommended by Nissan, to disassemble them. They are non serviceable. I took this one apart to try and determine the cause of failure. "Failed" rockers on a SOHC KA are ones that collapse and do not rebound/re-inflate/spring-back/ are stuck. Ones that do not collapse are filled with oil, since they are hydraulically adjusted by oil pressure. You can squeeze the oil out and they will then be springy. The one in this video was a stuck lifter. It was fully collapsed and would not extend out. This is sally because trash of some sort has scared up the lifter bore and hung it up. Ill try to do a comparison video in the next week. Thank you for the question
awesome viieo! so glad i found it! its literaly a baby lifter!
When to the wrecking yard to pick up some rocker arms how to i know if their bad? Or good?? Found a set that had no play on them when installed but when i took them off the head the little plunger on the rocker are very stiff. Is that normal?
Thank you! I just disasembled mine, not too dificult, used a needle
Thanks for the video
I’m sad to see you never got around to that second video I guess I will cuss the retainer blindly !!!
I have cleaned mine best I can and they still flat so something’s got to give
Like you said, very little info on these available. Thank you so much!
So after you clean them, are they still usable?? And do you uave trouble get the air blead back out for use?
Thanks again.
Are you planning to reuse this rocker arm?
I am not planning on reusing this particular rocker at this time. I have several sets and the set that this one came from had multiple that were stuck/bad.
Todo un video de 10 minutos y Nadamas se la paso agarrando el buzo, entonces para que muestra todas las partes, mal video habla mucho
el autor esta explicando que el video solo es para demonstrar como funcionan los lifters y por que se atoran ya que no no hay videos o instrucciones que pudo encontrar en internet. y en sus respuestes en los comentarios tambien recomienda no volverlo a usar y mejor comprar nuevos