How to Replace Front Steering Knuckle 2012-2016 Subaru Impreza

Buy Now!
New Steering Knuckle from 1AAuto.com 1aau.to/ia/1ASTE01082
This video shows you how to install a new TRQ steering knuckle on your 2012-2016 Subaru Impreza.
This process should be similar on the following vehicles:
2012 Subaru Impreza
2013 Subaru Impreza
2014 Subaru Impreza
2015 Subaru Impreza
2016 Subaru Impreza
Tools you will need:
• Pry Bar 1aau.to/oTP/1AXAA00020
• 19mm Wrench 1aau.to/oVW/1AXAA00010
• 10mm Socket 1aau.to/obbF/1AXAA00017
• 14mm Socket 1aau.to/obvC/1AXAA00015
• 17mm Socket 1aau.to/obvC/1AXAA00015
• 19mm Socket 1aau.to/oahp/1AXAA00043
• 32mm Socket 1aau.to/ocH/1AAST00003
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/oiE/1AXAA00439
• Bushing Removal Tool
• Pliers
• Side Cutters
• Ratchet 1aau.to/obBG/1AXAA00016
• Socket Extensions 1aau.to/obvC/1AXAA00015
• Torque Wrench 1aau.to/oaFe/1AXAA00044
• Bungee Cord
• Copper Anti-Seize
• Gloves 1aau.to/o8y/1AXSS00048
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses 1aau.to/oZI/1AXAA00343
• Floor Jack 1aau.to/o5J/1AXAA00068
• Hammer 1aau.to/oUd/1AXAA00091
• Jack Stands 1aau.to/oTN/1AXAA00065
• Punch
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@PhotonReceiverAstrophotography]

New title suggestion "what to do after ball joint pinch bolt snaps"

[@markshumskiy9657]

Really thorough instructions, helped me get this job done on a 2018 legacy.

[@AFatherToTheFatherless]

Never trust TRQ videos. Important steps are always edited out

[@RowanHawkins]

I can't believe this guy didn't use penetrating fluid to get the cotter pin out. all it needed was a little liquid wench and they could have probably just wiggled it out once the rust was addressed. Why go through all that extra work.