I do pressure washing and when i do roof washing customers always ask if i know how to change broken roof tiles i think its time to learn ..great video 👍
UK, we have a lip at the head onto a roofing batten, as well as two galvanised clout nail holes, every second row usually nailed but that ratio can vary, but ta for the upload.
If you do a lot of repairs it's worth using a brickies trowel to lift the whole tile from the bottom, you can use the leverage to evenly place the new tiles nibs over the baton
Wow we don't screw tiles down in NZ, what a pain. We nail every second one so u can easily kick up one of the tiles above an replaced even easier. Double screw would only be in high wind areas an a major pain for roofers. Good video anyway 👍
Couldnt you use a drill and a right angle adapter and unscrew the old screws and put new ones in? Looks like there is plenty of space when you pull up the top tile
Villa 900 concrete tiles. There are a lot of them that looks very similar though. Have to make sure you get the same profile you have. Otherwise they won’t interlock correctly.
That one is a Villa 900. However, there are a dozen different profiles that look almost exactly the same but are not compatible because of very small difference in size or interlock.
This tile is a Boral Villa 900. But there are quite a few tiles that look very similar to this one with slight differences in the size and interlock, none of which are compatible with one another. I would be happy to help you identify your tile if you want to send me a few profile shots. The stamp on the back will tell me a lot, but we can usually identify with just a few decent photos of the tile and interlock. You can email them directly to me at Joe@PRC-FL.com.
@@precisionroofconsulting1713 the old tile was vanguard roll. I got a sample of the villa 900 and it was not aligned. Do know where I can find a similar groove pattern and size?
Nothing fits with Vanguard Roll other than Vanguard Roll as is the case with almost all concrete roof tile. There are a few distributors out there that deal in salvage tile though. My local go-to boneyard here in Central Florida is All Points Tile & Slate. Unfortunately, they are completely out of Vanguard at the moment. Tile Roofs Inc. Is probably your best bet. They’re in Indiana, but ship nationwide. www.tileroofs.com.
@@JGraham63 the side channel in that tile roof is supposed to remain unobstructed , otherwise water will be stuck and back-flow creating another opportunity for a leak.
I do pressure washing and when i do roof washing customers always ask if i know how to change broken roof tiles i think its time to learn ..great video 👍
The glue will block Watercourse mate.
Dynamic explanation! Love that you improvised by making your own tool! You just helped out this DIY gal and many others!
Finally found the answer! Thanks! Good video!
Thanks, great information! Just what I needed.
UK, we have a lip at the head onto a roofing batten, as well as two galvanised clout nail holes, every second row usually nailed but that ratio can vary, but ta for the upload.
It is the best DIY video for tile replacement I've ever watched. As usual the better video you see the more it is underrated. Thanks a lot.
If you do a lot of repairs it's worth using a brickies trowel to lift the whole tile from the bottom, you can use the leverage to evenly place the new tiles nibs over the baton
Great video, thanks.
Great video, very informative. Thank you
Thank you, helped a lot.
Great job and well explained.
Great demo. Thanks
By far the hardest way to change out a tile
audio quality sucks but very informative, thanks!
Good job thanks
thanks Mate. gives me hope that i won't screw up my job too badly....smile
Wow we don't screw tiles down in NZ, what a pain. We nail every second one so u can easily kick up one of the tiles above an replaced even easier. Double screw would only be in high wind areas an a major pain for roofers. Good video anyway 👍
We are in Florida. It is a high wind zone and everything is a pain when it comes construction design
awesome. thanks man.
Couldnt you use a drill and a right angle adapter and unscrew the old screws and put new ones in? Looks like there is plenty of space when you pull up the top tile
The screws are 3" and installation specs only allow for up to 2" of nose deflection.
@@JGraham63 look up right angle drill hex driver.
Good Morning, thanks for showing me how this is done. Can you refer a French tile roof repair company in Chicago, IL?
What are those tiles called? I need some for my home but I don't know what are they called?
Villa 900 concrete tiles. There are a lot of them that looks very similar though. Have to make sure you get the same profile you have. Otherwise they won’t interlock correctly.
what did you use to cut the knotch in the rebar
Can someone please tell me the name for that tile ?? I have the same ones....
That one is a Villa 900. However, there are a dozen different profiles that look almost exactly the same but are not compatible because of very small difference in size or interlock.
That was pretty slick. I have never seen mod bit under tile before though.
I have been trying to find that very tile to replace some cracked ones. What is the name of the tile?
This tile is a Boral Villa 900. But there are quite a few tiles that look very similar to this one with slight differences in the size and interlock, none of which are compatible with one another. I would be happy to help you identify your tile if you want to send me a few profile shots. The stamp on the back will tell me a lot, but we can usually identify with just a few decent photos of the tile and interlock. You can email them directly to me at Joe@PRC-FL.com.
@@precisionroofconsulting1713 the old tile was vanguard roll. I got a sample of the villa 900 and it was not aligned. Do know where I can find a similar groove pattern and size?
Nothing fits with Vanguard Roll other than Vanguard Roll as is the case with almost all concrete roof tile. There are a few distributors out there that deal in salvage tile though. My local go-to boneyard here in Central Florida is All Points Tile & Slate. Unfortunately, they are completely out of Vanguard at the moment. Tile Roofs Inc. Is probably your best bet. They’re in Indiana, but ship nationwide. www.tileroofs.com.
Honestly dewalts 90° bit driver works great its 20 bucks
Can't hear you hardly.
R oo p
Great video but sound is very quiet. Had to turn it full blast
Sound terrible
Umm, but its the edge tiles that always break, why not show that repair...
Dude.....Shut Up.
Have you ever used one of these to get tiles and tools up the roof?
ua-cam.com/video/8W15XlB3N2g/v-deo.html
never trust to repair your roof a man wearing golf clothing.
I can’t say that I disagree 😄
@@JGraham63 the side channel in that tile roof is supposed to remain unobstructed , otherwise water will be stuck and back-flow creating another opportunity for a leak.
looks like it would be a far more difficult job to repair a tile that had been installed this way