Yup, gets annoying. Arma recommends ultra settings for my pc. Only runs at 30fps 💀💀 my mates laptop can run it ultra much better then my pc. 16gb ram, ryzen 7. Gtx 1660 thats my pc. Arma has pol optimisation
I also run this game with a reshade preset I use in most of my games. Makes the game more crisp and details more pronounced. In Division 1, it brings out the details in gear, one can almost see each individual thread in vests and clothing.
Is it like a shader pack? Cause if Never heard of this. And i would like to use it myself if its not to hard to install or anything? And can a rtx 3070 run it? The normal one. + i9 10850k and 32 g ram. Or do u need high high high end alien hardware?
@@Fluffyballz Its a bunch of graphics settings or something. Its easy to install, just point it at your Arma.exe and let it go. Im sure you can find some presets on the internet, or make your own if you understand all the different things that are in reshade.
Dude this video is absolutely amazing, I shot from a solid 60 and now I’m sitting anywhere from 145-150. Thank you so much man. Now I can’t get stuck frozen when trying to heal in combat.
You can get a really substantial FPS increase by turning down the sampling rate. It does get a bit blurry that way but you can counteract that by turning up the Sharpen Filter. The filter is much cheaper than rendering at a higher resolution. Play around with different sampling values until you find a good balance between looks and fps boost.
Hey thanks for the video! This is by far the best set up video I’ve seen. You kept it short and Simple. You didn’t go off on random rants. It was perfect. Taught me a lot and you’re very good at explaining what everything does. Keep up the good work. I’d like to see you get 1mil subscribers
Be advised guys with gaming laptops and slower rigs this video is not advised, although its great information and will definitely use it once i upgrade my rig
I tried a couple different guides for this, THIS ONE ACTUALLY WORKS WELL. IT IS UPDATED TO WORK UP TO DEC 2022. Thank you again soo much. Also, for anyone who plays King of the Hill Servers, here's another little treat to try out while in game. Try shift F2. This will show a little mountain with a slash through it on the left center. It limits view distance down significantly to like 4-6 hundred meters. You can toggle it easily but could easily add significant fps, its not noticeable if your in the city. I dont even notice it unless I am flying. So, when I am, i quickly just toggle it off.
DO NOT TURN PARTICALS TO MAX IF YOU ARE USING ANY OF THE BLAST CORE OR EXPLOSION EFFECT MODS IT CAN ABSOLUTELY TANK YOUR FPS thanks for coming to my ted talk :)
Hello, As I am playing Arma a lot and need the Performance Boost at any cost i tried out your Video solution and here's what I got in FPS: My Computer has a ryzen 7 2700x, gtx1050ti and 16GB RAM All FPS are taken from 6 fps counts averaged together: Normal at a distance of 2000 (most people use this as infantry): Airport: 82 FPS Salt lake: 117 FPS Kavala: 47 FPS After Applying your Tips and settings: Airport: 102 FPS Salt lake: 128 FPS Kavala: 66 FPS After enabling -hugepages in the launcher: Airport: 112 FPS Salt lake: 135 FPS Kavala: 66 FPS My Conclusion is that your Video helped a lot: In Summary: Your method got me an average of 24.5% Increase in FPS (Which for Arma is huge!!) with the biggest being in Kavala (40%). Using huge pages bumps this even more with an average increase of 30.6% (oof!!!) with again a 40% Increase in Kavala. You Sir have my best wishes! Use those calculations for what you guys want. My GPU is not really good but it still makes a difference. Im wondering if unparking my CPU Cores will help even more? 🤔 Cheers!
You're a life saver man! I was running 60 fps before and getting frozen if I got too close to planes and helicopters and basically anything too big for my game. Now I'm at a cool 90-100 FPS!
Finally built a pc but still need a graphics card. I've used this video in particular many times now to setup arma and it has always worked out. Good guide even if your still running a 1050 ti but everything else being new. this guides still worth following as it still improves your frames even if all but your graphics card is new. Definity do this.
you missed a couple of settings that actually make a difference also. The MALLOC for those of us who play on Intel, switching to the TBB4 Intel MALLOC, gives a HUGE RAM performance boost as its tailored to the way Intel CPU's like to handle RAM instructions over the Windows version. JEMEC is AMD but is kinda questionable, AMD Users should be Windows or if you want, JEMEC. Large Page Support is a MUST, with the SSD's and NVMe's we all have now, this allows huge amounts of PageFile Space to be directly used by ARMA for quicker loading times. and is a big perf increase in 64Bit ARMA.
turning those options on also, significantly reduces loading times for servers that use a lot of mods loaded together and gets you into the game quicker.
you are a life saver. I got this game when i upgraded my cpu to a Ryzen 7 3800X and it seemed like it made it worse. Now i can actually play the game!!
That was really helpful and to the point. Thank you. I have just followed this step by step process and am glad to say I am seeing vastly improved FPS!
Word of warning about CPU count in Parameters. In most cases it should be disabled. See below: "For 99% of people it should simply not be touched. If you go to your Documents and in a the Arma 3 folder, open up arma3.cfg with notepad. You can look at an option pretty close to the top labeled “detectedCPUCores”. For you it should already equal to 12 because that’s how many threads your CPU has. That pretty much means Arma is already setting this value automatically and enabling it in parameters does absolutely nothing at best and hurts performance slightly at worst. Setting it to 6 would mean you’ve told Arma to only use half of what it was using before anyway. It barley matters because Arma can hardly utilize more than one thread no matter what the core count is, so even at half the threads you’re still limited by the engine. TLDR, just disable the option in parameters, it’s entirely a placebo effect that it gives you *any* performance difference *unless* your detected core count is wrong in the arma3.cfg"
where did you get this information ? basically every tutorial on YT says to enable CPU count, on what basis are you implying that I should disable it ?
I can't tell if all of these *thank you! I had x FPS and now I have x FPS* comments are real or not some kinda arma meme I am missing 🤣 I know arma and I know it's Slavic jank These numbers just make me very confused that people claim to get XD
Good stuff, thanks for the refresher, I had forgotten about the CPU, threads and those other settings. Recently upgraded to a 12700k and a 3080... ARMA plays like it should now haha.
Dynamic Light can decrease your FPS a bit. It will render the light sources around you and if you're playing in the big city and got low FPS, mind lower it a bit. Denser light source, lower this setting and it will get ugly also.
Hey man I need some serious help, whenever i try to do this my pc makes like a popping noise. Not that cool. I don't know whats going on but i cant do this. I'm using all the correct parameters and everything. EDIT: it seems to do this all the time regardless of settings, i guess i just wasnt hearing it before now. Weird. EDIT 2: after i made this comment it stopped making the sound.
if your low frame rate comes from hosting large scale battles with lots of AI then this doesn't have any effect at all, also some parts of certain maps kill performance no matter the setting, you might go from 180fps in the middle of nowhere but it will still drop to 25-35 fps in the middle of a city in cam lam. I think people with low end PCs probably get more out of these guides
Went from 25-30 FPS on a GTX980 4GB i5 4690K 16GB RAM to 75-80 FPS on 1440p 144hz. Thank you for the guide man! Hopped into Mike Force, spawned at FOB surrounded by VC and sit at 45 - 55 FPS so I'll fucking take it!!! Stoked!
i have a issue i can run a game with like small amount of bots but if i create a scenario like 30 bots i have from 80 fps to 12 30 i dont know what to do
So. It kind of worked. IDK if im the only one but I was able to see difference in FSAA settings. They aren't big but they were there. I personally think the bigger problem is that I only got 3 more Frames. Its better then nothing but im not sure if it's what i wanted because now im on 47 Frames form 60. I did keep Boll and Blur on because I like the "REALISM" of not seeing everything in a split second. But if that isn't the problem im not sure what will be. If you wound be so nice you could may help me out...
just some FYI if you have HDMI 1 or 2 the max refresh at 4k is 100mhz...3.5K 3440 × 1440 (≈21:9) 30 Hz max 100 Hz you need a display port to get full 165hz
Notepad++, Atom, ....there's another one... Use em, you probably do already - but anyway thanks for the reminders in this good video! You are RIGHT on the money!
So far I have not many objections but I'd say as long you not fly (what I not care at all about) set ur view Distance at around 6k and Object well around 4k (depending on how high you've set ur view distance). Not needs to be the same but not less than 2k less I'd say. Higher settings here will maybe not help your acctual gameplay and performance but the atmosphere, because you maybe want to see further than you need and it wont have to much impact as long ur system isn't really that bad but that's really up to user and system. But 10k I think it to much because it definitely got an impact on performance, on the other hand as I said I don't fly and only use aircrafts as a transport. Oh and set clouds to the minimum - it's useless and any effect it has on performance is a wasted loss I think - same as for shadows and here I fully agree! What Im interested in and don't know is because I have an issue with quite blurry visual ingame, is the AA & PP tab... My settings here are similiar to yours (even that I have this Anti Aliasing FSAA at x2, ATOC at all grass+trees (not sure why but I go with it) and Aniso. filtering at Standard. But I still have this blurry vision and I cannot really improve it...
i can only run 60 fps with a 2060rtx and a ryzen 7 3700x, copied your parameters they helped but your settings made my game go to 25 fps lol Edit : realized i was running it on my hdd switching to my ssd thats probably my problem lol
![Arma 3 - How I doubled my FPS - Optimize Performance Guide [2024]](http://i.ytimg.com/vi/GktBSZcglFk/mqdefault.jpg)
Ah yes, arma. The only game that doesnt change fps even if you turn down graphics
Yup, gets annoying. Arma recommends ultra settings for my pc. Only runs at 30fps 💀💀 my mates laptop can run it ultra much better then my pc. 16gb ram, ryzen 7. Gtx 1660 thats my pc. Arma has pol optimisation
@@snas1686 yo lo corro a 60 fps en una laptop sin tarjeta gráfica XD a gráficos medios
It’s a old game that is made to run on single core, it isn’t friendly with modern hardware
Yeah, bit late but I have an rtx 3060 and a i7 11370H (good gpu, bad cpu), in an average multiplayer match my fps is around 15 to 25.
@@Dante-Delt it is a cpu heavy game not a gpu heavy game
This video is absolutely amazing i went from stuck at 60 fps to 150 max fps omg thank you so very much i wish i knew this a year ago 😆
You had 205 fps in the settings menu not in game
You were likely stuck at 60 because of v sync.
Thanks a ton man, this took my idle fps from 55 to 115 great vid!
Went from 60ish idle to 230 idle shit made a huge difference
I also run this game with a reshade preset I use in most of my games. Makes the game more crisp and details more pronounced. In Division 1, it brings out the details in gear, one can almost see each individual thread in vests and clothing.
Is it like a shader pack? Cause if Never heard of this. And i would like to use it myself if its not to hard to install or anything? And can a rtx 3070 run it? The normal one. + i9 10850k and 32 g ram. Or do u need high high high end alien hardware?
@@Fluffyballz Its a bunch of graphics settings or something. Its easy to install, just point it at your Arma.exe and let it go. Im sure you can find some presets on the internet, or make your own if you understand all the different things that are in reshade.
@@CMDRFandragon okay thx!
Dude this video is absolutely amazing, I shot from a solid 60 and now I’m sitting anywhere from 145-150. Thank you so much man. Now I can’t get stuck frozen when trying to heal in combat.
Yeah this is the video to watch. I shot up from 30 fps to over 280 basically mirroring and tweaking the setting in this vid. Absolutely solid.
You can get a really substantial FPS increase by turning down the sampling rate. It does get a bit blurry that way but you can counteract that by turning up the Sharpen Filter. The filter is much cheaper than rendering at a higher resolution. Play around with different sampling values until you find a good balance between looks and fps boost.
I hit like just because you took the time to share your findings with everyone else... Thank you for that..
Hey thanks for the video! This is by far the best set up video I’ve seen. You kept it short and Simple. You didn’t go off on random rants. It was perfect. Taught me a lot and you’re very good at explaining what everything does. Keep up the good work. I’d like to see you get 1mil subscribers
BROOOO I LOVE U literally went from red 20 fps/30 fps and huge stuttering even in the menu to f ing 130 fps bro wth i love u tysm
Be advised guys with gaming laptops and slower rigs this video is not advised, although its great information and will definitely use it once i upgrade my rig
Dude thanks so much for this video. I've been playing on a 5900hx and RTX 3080. I was getting around 40fps! With your guide it's up around 100fps!
Been looking for something like this for a long time. Probably the best tutorial on how to improve your fps!
I tried a couple different guides for this, THIS ONE ACTUALLY WORKS WELL. IT IS UPDATED TO WORK UP TO DEC 2022. Thank you again soo much. Also, for anyone who plays King of the Hill Servers, here's another little treat to try out while in game. Try shift F2. This will show a little mountain with a slash through it on the left center. It limits view distance down significantly to like 4-6 hundred meters. You can toggle it easily but could easily add significant fps, its not noticeable if your in the city. I dont even notice it unless I am flying. So, when I am, i quickly just toggle it off.
Don't forget about enabling Large or huge pages in the parameters.
DO NOT TURN PARTICALS TO MAX IF YOU ARE USING ANY OF THE BLAST CORE OR EXPLOSION EFFECT MODS IT CAN ABSOLUTELY TANK YOUR FPS thanks for coming to my ted talk :)
Hello,
As I am playing Arma a lot and need the Performance Boost at any cost i tried out your Video solution and here's what I got in FPS:
My Computer has a ryzen 7 2700x, gtx1050ti and 16GB RAM
All FPS are taken from 6 fps counts averaged together:
Normal at a distance of 2000 (most people use this as infantry):
Airport: 82 FPS
Salt lake: 117 FPS
Kavala: 47 FPS
After Applying your Tips and settings:
Airport: 102 FPS
Salt lake: 128 FPS
Kavala: 66 FPS
After enabling -hugepages in the launcher:
Airport: 112 FPS
Salt lake: 135 FPS
Kavala: 66 FPS
My Conclusion is that your Video helped a lot:
In Summary: Your method got me an average of 24.5% Increase in FPS (Which for Arma is huge!!) with the biggest being in Kavala (40%). Using huge pages bumps this even more with an average increase of 30.6% (oof!!!) with again a 40% Increase in Kavala.
You Sir have my best wishes! Use those calculations for what you guys want. My GPU is not really good but it still makes a difference.
Im wondering if unparking my CPU Cores will help even more?
🤔
Cheers!
When you eventually upgrade cpu, you'll see an increase too. I had a 2700x a while back and I can confirm that it didn't like arma as much as my 9600k
This is a great vid. I've seen many that get carried away but these tweak's are quite simple but give great results.
Thats a really good video mate :) Thank you :) You have a really good relaxing voice for stuff like this, have a great day sir :)
Thanks for the step by step guide,,,,,boosted my frame rate greatly,,,,super smooth now.
thanks now i am running from 80 fps to 90 fps
my specs
cpu : ryzen 5 3350G
Integrated gpu : radeon vega 11 graphics
16gb ram
hdd
i have a 1650 super an i got 50 how
You're a life saver man! I was running 60 fps before and getting frozen if I got too close to planes and helicopters and basically anything too big for my game. Now I'm at a cool 90-100 FPS!
Finally built a pc but still need a graphics card. I've used this video in particular many times now to setup arma and it has always worked out. Good guide even if your still running a 1050 ti but everything else being new. this guides still worth following as it still improves your frames even if all but your graphics card is new. Definity do this.
From 60 to 220 (on the menu) thanks a ton man!
Thank you much; went from 60 to 145. Game runs great.
pip should not be set to anything besides disabled, since it doubles cpu load (rendering frame twice)
This looks like it works for the campaign , I did the same stuff with ur other vid some time ago, I'm going to try how it does online
Thank you for this very good, detailed tutorial, really helped me out in ARMA 3. You have my like and sub :)
you missed a couple of settings that actually make a difference also.
The MALLOC for those of us who play on Intel, switching to the TBB4 Intel MALLOC, gives a HUGE RAM performance boost as its tailored to the way Intel CPU's like to handle RAM instructions over the Windows version.
JEMEC is AMD but is kinda questionable, AMD Users should be Windows or if you want, JEMEC.
Large Page Support is a MUST, with the SSD's and NVMe's we all have now, this allows huge amounts of PageFile Space to be directly used by ARMA for quicker loading times. and is a big perf increase in 64Bit ARMA.
turning those options on also, significantly reduces loading times for servers that use a lot of mods loaded together and gets you into the game quicker.
@@CapStar362 hey, where is that tbb4 intel malloc?
@@alexcbm8527 its under the launcher options
its in the launcher, under Parameters, click on Parameters then under the Advanced Section, switch the MALLOC to TBB4 Intel.
@@CapStar362 thank you. found it.
you are a life saver. I got this game when i upgraded my cpu to a Ryzen 7 3800X and it seemed like it made it worse. Now i can actually play the game!!
Thanks brother much appreciated just bought my first gaming laptop and was so confused why arma looked like a mess. Much better now
Thank you so much I was running the game at 60fps and now I’m at 150-160 fps now
Such an underrated youtuber. You need more subs.
THANK YOU SO MUCH!!! That helped so much I can play without wondering if I should have returned it.🙏🙏🙏
That was really helpful and to the point. Thank you. I have just followed this step by step process and am glad to say I am seeing vastly improved FPS!
Not only liked but also favorited.
Amazing man thanks to this I can now enter to saigon and be at 40fps when it previosly ran at like 10
Still only getting 40 frames on exile. I have an i7-9700k, 32gb of ddr4 ram, and a 3070 TI.
Word of warning about CPU count in Parameters. In most cases it should be disabled. See below:
"For 99% of people it should simply not be touched.
If you go to your Documents and in a the Arma 3 folder, open up arma3.cfg with notepad. You can look at an option pretty close to the top labeled “detectedCPUCores”. For you it should already equal to 12 because that’s how many threads your CPU has.
That pretty much means Arma is already setting this value automatically and enabling it in parameters does absolutely nothing at best and hurts performance slightly at worst. Setting it to 6 would mean you’ve told Arma to only use half of what it was using before anyway.
It barley matters because Arma can hardly utilize more than one thread no matter what the core count is, so even at half the threads you’re still limited by the engine.
TLDR, just disable the option in parameters, it’s entirely a placebo effect that it gives you *any* performance difference *unless* your detected core count is wrong in the arma3.cfg"
where did you get this information ? basically every tutorial on YT says to enable CPU count, on what basis are you implying that I should disable it ?
i went from 60 to 380 after this thanks man
....wtf
@@creamyeugene He is talking about FPS indicator in the video options mine went to 330 not in game.
Amazing video. You deserve much more subscribers...
Thank you so much, now I can enjoy this game a lot more!
Holy shit it worked ! Word for word do it !
The most funny thing to me was how I literally have some of the same games he has on his desktop
I can't tell if all of these *thank you! I had x FPS and now I have x FPS* comments are real or not some kinda arma meme I am missing 🤣
I know arma and I know it's Slavic jank
These numbers just make me very confused that people claim to get XD
Good stuff, thanks for the refresher, I had forgotten about the CPU, threads and those other settings. Recently upgraded to a 12700k and a 3080... ARMA plays like it should now haha.
Dynamic Light can decrease your FPS a bit. It will render the light sources around you and if you're playing in the big city and got low FPS, mind lower it a bit. Denser light source, lower this setting and it will get ugly also.
Thank you! I went from 30 to 65FPS!
I’m glad I watched this. My launcher setting was at 1 core when I have 8 and I didn’t enable hyperthreading
Hey man I need some serious help, whenever i try to do this my pc makes like a popping noise. Not that cool. I don't know whats going on but i cant do this. I'm using all the correct parameters and everything.
EDIT: it seems to do this all the time regardless of settings, i guess i just wasnt hearing it before now. Weird.
EDIT 2: after i made this comment it stopped making the sound.
Holly poop!!
30FPS to 90+ solid...thank you sofa king much!!
Freaking Vsync was ruining the game play since 2018 I finally found it now with 120+ FPS
It's worked, but now is 2022, thanks a lot bro
It’s 2022 and these still apply! Thanks
As a total noob on both Arma and PC all together,,, I salute yew Sir
Such a well made video
Woooow bro went from 60 FPS to 200 LETS GOOOO thank you
if your low frame rate comes from hosting large scale battles with lots of AI then this doesn't have any effect at all, also some parts of certain maps kill performance no matter the setting, you might go from 180fps in the middle of nowhere but it will still drop to 25-35 fps in the middle of a city in cam lam. I think people with low end PCs probably get more out of these guides
Wow so I upgraded my setup and I was wondering why I had a frame drop... I feel dumb 🤣, thank you so much brother.
Went from 25-30 FPS on a GTX980 4GB i5 4690K 16GB RAM to 75-80 FPS on 1440p 144hz.
Thank you for the guide man!
Hopped into Mike Force, spawned at FOB surrounded by VC and sit at 45 - 55 FPS so I'll fucking take it!!! Stoked!
I just got 125 fps from this thank you so much
Bro I couldn’t thank you more I was on 40fps now I’m on like 220
I love you bro. Finally Arma is again playable for me. Stable 60
appreciate the help brother!
excellent explanation. keep it up bro
I didnt get much more fps but now i can play the game, from 20-40 to 40-60 :D
Mine got worse
What the....my toaster can now run in high graphs but not on a medium one, a very nice video indeed.
Great info. Really helped me with SOG prairie fire Mike Force performance
Liked and subbed.
i have a issue i can run a game with like small amount of bots but if i create a scenario like 30 bots i have from 80 fps to 12 30 i dont know what to do
thank you man i went from 30 to 50 fps thanks
Nice vid. I went from the menu with 65 FPS to 335 and in game I went from 20-25 to 62fps
i also recommend using razor cortex game booster that will give another 5 to 10 fps
Razor booster - shit
@@akiamericanakita616 nahh boosts me 20 fps or so it unlocks more of your used ram and closes un wanted shit down
@@CreepzOnTop bruh....
Big thx man, awesome guide.
So. It kind of worked. IDK if im the only one but I was able to see difference in FSAA settings. They aren't big but they were there. I personally think the bigger problem is that I only got 3 more Frames. Its better then nothing but im not sure if it's what i wanted because now im on 47 Frames form 60. I did keep Boll and Blur on because I like the "REALISM" of not seeing everything in a split second. But if that isn't the problem im not sure what will be. If you wound be so nice you could may help me out...
When you click the auto detect button on Arma 3 it should come to this video
That’s man for the setting now I’m playing the game with really good FPS
just some FYI if you have HDMI 1 or 2 the max refresh at 4k is 100mhz...3.5K 3440 × 1440 (≈21:9) 30 Hz max 100 Hz you need a display port to get full 165hz
Thanks for this guide. I still get stutter with Arma, any recommendations on how to to tune the PC as I think it is a fan issue?
My arma GPU stuff says
"GPU_MaxFramesAhead=1000;
GPU_DetectedFramesAhead=3;"
That is by default, is that right?
yep
Thanks for the helpfull review 🥳 Its partytime and my fps raised from 32 to 220 lol. Boom, bro
i have GPU_MaxFramesAhead=1000:
What does it means ?
Thanks dude. Simple and easy.
5950x and a 3070ti with only 11% cpu usage lol. Thank you so much for the refresh rate in config. However, what are your specs? I'm curious.
After I apply your setting it’s run from 60 to 20 😂
And notice that my settings was higher😂
thanks mate really helped
Thanks, i went from ~45 fps to ~65
thank you, definitely helped a bit since im also local hosting
Thanks for the tips man
Notepad++, Atom, ....there's another one... Use em, you probably do already - but anyway thanks for the reminders in this good video! You are RIGHT on the money!
you earned my sub man thank you
Holy crap it actually works
So far I have not many objections but I'd say as long you not fly (what I not care at all about) set ur view Distance at around 6k and Object well around 4k (depending on how high you've set ur view distance). Not needs to be the same but not less than 2k less I'd say.
Higher settings here will maybe not help your acctual gameplay and performance but the atmosphere, because you maybe want to see further than you need and it wont have to much impact as long ur system isn't really that bad but that's really up to user and system. But 10k I think it to much because it definitely got an impact on performance, on the other hand as I said I don't fly and only use aircrafts as a transport.
Oh and set clouds to the minimum - it's useless and any effect it has on performance is a wasted loss I think - same as for shadows and here I fully agree!
What Im interested in and don't know is because I have an issue with quite blurry visual ingame, is the AA & PP tab...
My settings here are similiar to yours (even that I have this Anti Aliasing FSAA at x2, ATOC at all grass+trees (not sure why but I go with it) and Aniso. filtering at Standard. But I still have this blurry vision and I cannot really improve it...
This worked very well thanks so much
i can only run 60 fps with a 2060rtx and a ryzen 7 3700x, copied your parameters they helped but your settings made my game go to 25 fps lol Edit : realized i was running it on my hdd switching to my ssd thats probably my problem lol
Settings start at 1:42
Thank you it was working good then I log in the next day and it's stuttering
after doing this I am getting about 20 more frames and the game looks way better and runs smoothly
also playing king of the hill server 74 people online
I love it!!👌
Very informative, job well done.🙃
HOLY SHHH i went from like 50-60 to over 300 dammn thanks a lot
Great guide. Thank you