1988 Honda CRX Si - Progres Tech Rear Sway Bar Install
Вставка
- Опубліковано 9 лют 2025
- Doing some last minute work on the CRX before Classic Hondas on the Dragon October 7-8th at Tail of the Dragon.
Rear Sway Bar Kit: fidanza.com/pr...
Fuel Strainer: amzn.to/3CizZE7
SEM Trim Black Paint: amzn.to/3rsWTnx
Stainless Steel Flange Nut: amzn.to/3Uw9686
Meguiars Ultimate Compound: amzn.to/3wjZd32
3M PerfectIt Ultrafine Machine Polish: amzn.to/3cbwruo
Drill Polish Attachments: amzn.to/3Pzf6cA
Heat Gun: amzn.to/3K8VtqP
Abrasive Nylon Wheel: amzn.to/3wYjzPU
Front Brake Rotors: amzn.to/3xK2wlq
Front Wheel Hubs: amzn.to/36zGUwX
Trailing Arm Bushings: amzn.to/3MkZ193
M12x1.25 Thread Repair Kit: amzn.to/3CtC8wM
Zinc-coated hose clamps: amzn.to/3viTXwC
Harness zip-clips: amzn.to/354IcPN
Bolt Buster Induction Tool: amzn.to/34EEn37
Rust Reformer Primer: amzn.to/3L8cIsp
VHT Chassis Paint: amzn.to/3goBYwm
Nylon Abrasive Brushes: amzn.to/3rulZ64
Yellow 3M Masking Tape: amzn.to/3Lgm8lu
Masking Paper: amzn.to/3soB608
Wax & Tar Remover: amzn.to/3soKIYG
My Instagram: / crxseth
just watched the 30 minute full rebuild. Bravo
This is so satisfying to watch. You work very methodical, it’s a pleasure to see you work🙏🏻
Congrats on the rebuild video hitting 1.8M
Well deserved.
Thanks!
Omg, I almost though you were not going to vacuum the carpet 😂 12:33
I almost left it, but I knew a quick vacuum would make a huge difference.
Such excellent work for someone doing it all. Loving the videos. Keep them going!
Damn bro, you've got me turning in my sleep. I can't even get a junked CRX around here without paying an arm and leg. Cheers! Insanely clean build.
Huge Honda fan…currently own a 2014 accord sport sedan as a daily. being a GenX’r the CRX Si were awesome back in the day. I had a new 1989 Isuzu I-Mark RS it was a blast..love pocket rockets
Such a beautiful car! You have so many dream cars! Keep up the awesome work!
Wish I was joining you at CHD8 with my EF Sedan, would have been the perfect year for it! Sadly it wont be ready in time. Hope you have a great trip out there Seth!
Next time!
Greetings from Poland. I used to have a crx like this.
Bro does everything himself. He's like the jackie Chan of Honda modification
Fajnie gość robi te Hondy, miło popatrzeć 😊👍🇵🇱🇺🇸🇯🇵
Dokładnie
keep them coming and we will watch !!
The bar came out great. Always thought progress makes a good products. But man, those seats look sick in there.
I'll be coming to the CHD meet this year and can't wait to see this beautiful 💎 up close and personal! I'm gonna try and do a quick refresh on my ITR swap internals b4 coming out!. She smokes a bit so I wanna do Valve Stem Seals, Piston Rings and probably Rod bearings where I gotta pull the rods anyways. Wish me luck lol. If I don't get to it I'm still coming but I'll be that guy with a smoke trail lmao
Don’t look too closely! It looks better in videos! Haha. Good luck on the rebuild! Only a week and a half away!
I love progress suspension, that's what I have on my Rex and it handles very well. Next the coilovers for me, lol.
See you in a few weeks!
This is amazing.
Where did you get the progress bar for a crx?
You can buy it from several retailers online.
I have a classic Honda (95 Civic coupe) but it's not fully restored yet. :(
Man the underneath of that REX is cleaner than the top of mine 😂😂
I was thinking how dirty it was! I need to clean it up some! It doesn’t match the rest of the car.
In Europe we had also leather seats
How do you know what angle to put the sway bar, and then the spacing for end links?
Another CRX project 🙏 😅
I don’t have it in me at the moment. Haha. Gotta get other stuff in life in order. That rebuild stuff is MAJOR!
nooo dont sell the ITR :(( wanted to see you restoring it :(
personally went with the ST bar myself to avoid the holes
I don’t love the idea of the holes, but wanted the extra bracing and the more typical mounting points for the sway bar as opposed to the ST.
Does said opportunities start an N or an F?
Where did you fine the cover underneath the spare tire? Looks like one unit. Maybe rubber mat type of material?
It’s OEM and it came with the car.
hheeeyyy...what website did you use to get the nuts, bolts, screws needed to restore. I have a 1999 Integra and I'm attempting the same task (restore) and its a pain not being able to locate the bots, nuts, screws, etc.
Www.Restotuner.com
Can this be installed on an HF? I noticed all the original sway bar hardware was removed and replaced and was wondering if that were the case would it work?
Yes, but you may or may not need new lower control arms.
@@crxseth Also, what is that mat you put in the hatch bottom at the 12:00 mark and where can I get one?!
@ It’s just a piece of craft foam from Hobby Lobby that I cut.
the threads pls...
Hey man im here at CHD where are you at?
I’m here! But the CRX broke down so I am in the silver S2000 with OEM hard top. I’ll be at the dam on Sunday.
@@crxsethwhat suspension combo you have on the crx and it’s smooth for a daily driving ?!
Well, that is definitely Progress!
See what I did there? 😅
can you put silicone sealant on the hole? just asking.. it felt like it will leak when there a flood or water splash or something. good build tho ^_^
I thought about that after getting it all together. I may eventually throw some seal and it gasket on the holes if I notice any issue. I’m sure with enough rainwater, it will trickle in. I don’t drive it much, so it won’t really be an issue.
@@crxseth ty for the reply much appreciated^_^
One of my old cars had a similar hole location and I never saw any leakage. I think the only way it would happen is if you go through deep water. But at that height, you'd have more to worry about.
But you could look for a small ring / firewall type gasket if it bothers you.
almost 50k subz
Tenho um Civic lx 1.5 1995. Mas no Brasil é complicado encontrar peças boas!
I like those rims What brand and type of rims are they ?
Sprint Hart CP Competition
Ok thanks 🙏🏻
will this fit a EF sedan ?
I’m not sure. I don’t know much about the sedans. Their website should show compatibility.
thanks - they should be the same @@crxseth
what lower control arms are you using?
These are HardRace.
thank you , CRX specific? @@crxseth
What Coilovers are those?
Just some Raceland Ultimos.
Worth it?
I haven’t had a chance to really test it. My transmission blew and I’m in the middle is engine swapping it now.
Will you be getting the front progress sway bar as well or what are your thought about. I'm planning to get the front and rear soon so just wanted to see if the front is also worth it.
Look so nice only for the back box to come n hide it shame nice crx tho
✌🏻🇳🇱
Restore Peugeot 406 please :D