BX 80 SERIES LINE UP! BX1880 and BX2380/BX2680 Comparison!

Поділитися
Вставка
  • Опубліковано 4 лип 2021
  • Lets take a look at Kubota's BX 80 Series line up! Comparing the BX1880 to the BX2380/BX23S and BX2680!
    Content provided by Huckabones Equipment, Cobden Ontario Canada.
    Find us online: www.huckabones.com
    Contact us by e-mail: youtube@huckabonesonline.com
    Call us: 1-613-646-2708
    Content edited by Mainville Media:
    / mainvilleatvandoutdoors
  • Авто та транспорт

КОМЕНТАРІ • 19

  • @avramisnegirev1827
    @avramisnegirev1827 2 роки тому +1

    I love my 2680! Small but such a beast! I always look for excuses to use it!

  • @Appalachianasshole41
    @Appalachianasshole41 2 роки тому

    Very helpful video much appreciated 👍

  • @robwallach6853
    @robwallach6853 2 роки тому

    How would you compare the BX1880 to the GR2120 just for mowing grass, ignoring cost and the fact that the BX can attach implements like a front loader? Does it have the same near-zero-turn ability? Same ability to mow thick wet grass? Uphill and downhill? Thanks for the videos!

    • @HuckabonesEquipment
      @HuckabonesEquipment  2 роки тому +1

      Both solid machines to cut the grass, it more comes down to if you want a loader/ rear PTO or not when comparing the 2 units. The GR is better on hills and a much shorter turning radius

  • @kagnewmp12
    @kagnewmp12 Рік тому

    I bought the 2020 BX 1880 brand new and it only has 100 hours on it. I was offered a 5 foot rear blade from a friend at a great price but can the little 1880 pull it okay. I mostly want it for snow here in Northern Michigan to just do a great clean up after plowing with the FEL.

    • @HuckabonesEquipment
      @HuckabonesEquipment  Рік тому

      Shouldnt have an issue with a 60" rear blade on the BX1880 for doing snow

  • @TimothyNewton
    @TimothyNewton 3 роки тому +2

    Does the front weight bracket on the 2680 interfere with the k connect option for the front snow blower?

    • @HuckabonesEquipment
      @HuckabonesEquipment  3 роки тому

      If you add the front weights it will interfere with the K-Connect, the regular grill guard does not hopefully that helps

    • @wildbill23c
      @wildbill23c 2 роки тому +1

      The bracket doesn't interfere as a matter of fact it becomes part of the K-Connect system. Can't use weights on it with the K-Connect system installed, but once you remove the blower and PTO adapter assembly and mount you can then install weights on it as you would normally.

  • @ephraimsanjuan2026
    @ephraimsanjuan2026 2 місяці тому

    What is the width of this tractor

  • @andysear15
    @andysear15 2 роки тому

    The cost difference I see at my (maybe) dealer between the 2380vs2680 is around $1,500-1,700, Mine will have a 60" mower and 50" front mounted snow blower. I have a 20 degree incline about 60', then it grades out and up a bit more. My question is simply this..Do I need that extra hp in the 2680 to blow the snow while driving up that incline. the 1880 is underpowered for sure and the 23hp may not be enough. You quick reply and opinion will be greatly appreciated. Winter is coming soon in new england. Thanks

    • @HuckabonesEquipment
      @HuckabonesEquipment  2 роки тому

      If you are going to be blowing lots of snow then going with the 26HP model will pay off. With these smaller tractors horsepower wont effect your traction/grip if your going with the turf tires a set of rear chains will help a lot more then the 3HP..long in short can't go wrong with either the BX2380 or BX2680 with the BX1880 most likely being underpowered for your needs

    • @andysear15
      @andysear15 2 роки тому

      @@HuckabonesEquipment Thanks, appreciate it.

  • @southpointphotos8508
    @southpointphotos8508 2 роки тому

    Great video!

  • @milestonemotorsports
    @milestonemotorsports 2 роки тому

    can you run a 48" mower deck on a the BX2380

    • @HuckabonesEquipment
      @HuckabonesEquipment  2 роки тому

      We used to run the 48" on the 70 series, honestly haven't tried on the 80 series

  • @sahmadi1000
    @sahmadi1000 Місяць тому

    It needs an engine.