I like the idea of this sander. My tools are air operated,my thinking is if I can pull less off of my air compressor,the better. It would have been helpful to have the sound of the sander instead of your music. Great video and great tips like buying an extra battery. The blend turned out very nice,thanks.
3:05 for a curvy area like this, are you using a Hook and Loop Soft Sponge Cushion Interface Buffer Pad on your Orbital Sander? Mine is 0.5 inch thick. I saw these being used on this very area on another channel the other day, and ordered a pack.
I absolutely love your videos! You teach a lot and get right to the point. I have watched your videos multiple times each and have notifications for any new videos you upload. I have a question for headlight restoration I plan on doing 5 or 6 cars in the family and want something that looks great but won’t die back and will last for years. Do you recommend the $59 speedo gallon kit or the $67 production 3 minute clear or possibly even a different gallon kit? Thanks!
Marco why would never use a dyna or hutchinson with a interface pad. I love the interface pad works so well smoothing primer doesnt cut into body work.
There cool don't get me wrong. But I beat the living crap out of my sanders so usually just buy a new one every year. 35$ is litterally a peanut to me honestly. Lol
@@speedokoterefinishnetwork4937 I hear that. Keep up the good work man I look forward to more content gratz on getting monetized. Since watching your cahnnel Im getting more into the JDM scene.
What is your opinion of the Speedkote SS 2790 G Primer? I want to use it on some new plastic bumpers for my 2005 Honda Civic as a sealer. I also want to use it on my 1998 Dodge Ram 1500 Truck, The truck has some minor rust holes on the doors and on the sail panels below and a mediium size dent on the exterior rear bed. Also the Dodge is black and the factory clear coat is peeling on the roof surfaces. Your videos are awsome. Your guidence is appreciated.
@@speedokoterefinishnetwork4937 Will the SS2790G work in both situations listed above or will I have to buy different primer/sealers? On the new plastic bumpers for the Civic with some adhesion additive as an epoxy sealer? On the Dodge Ram as an epoxy sealer, and primer for a total vehicle repaint with your Jet Black single stage.
Brand new bumpers you want the trc 500 if there BARE PLASTIC, if the bumpers come with factory shipping primer there is 0 need to put more primer on them. For doing body work and stuff yea the smr2790 is Awsome
Smr210 is the God of primers man. I use it on everything. It's tint able, thin able, or you can spray it straight and it goes on thick as honey and can block it down like body filler. Hands down best primer on the market for the money. Only 79 bucks for a gallon includes activator
Hey man, quick question. I went to order some 2k clear coat from speedokote. They are not shipping to Canada. Is that a covid 19 thing or there not shipping to home users in canada?
Yea it's a clear solution you thin 1-1, then add basecoat to it and is like a translucent layer to your blend. It took me a long time to do it and get good, but I'm pretty good at it now.
Naa basecoat binder is for people who have mixing systems for oem refinishing and simply don't want to pay the hefty charge for locally sourced binder.
It's usually best to buy that stuff premade. It takes hours of testing to make a solid formula. Everyone mixes slightly different. I don't give away any information on my own formula.
Smr135 is my year around go to for panle work. Summer time for all overs I stick with the ss1200. At only 179.99 for a 6 quart kit that's only about 29 bucks per sprayable quart still very affordable.
Nice bro. Have yet to shoot smr135 actually. Have used ss1200 in the summer with medium activator, laid down like glass. Took a while to dry, that’s my only complaint. But hey that’s a price I’m willing to pay for virtually zero dieback. I’ll have to try SS-1210 or smr135 next. Still have some 1200 and smr130 left. Also got some euro clear, so I’m gonna hold off till I get low 😂
@@prestonrushmore9692 summer time use fast with the ss1200. 2-3 coats with fast activator still get no die back and it dries about 5 min faster tack free. The Smr135 is good for bumper / multi panle jobs. Or all overs if you Wana be like me and spray a whole car with your garage door open in 40 degree weather 🥴🥴🥴🥴😂
@@speedokoterefinishnetwork4937 hahahah! I saw that in your other vid, you animal😂 thanks for the tip on the fast activator for ss1200. I’ll have to try that, anything that gets me dust free quicker I’m all for, my garage is far from a spray booth as I know you understand lol
Yup been there. You saw my old shop. So yea stick with fast activators for sure. Only time I'd go medium if it was like 90-100 degrees. But the ss1200 always use fast activator. Even with the fast activator it still take 12 min to dry tack free in hot weather which is plenty of time
Harbor freight would have been geniuses if they had made their Bauer tools to accept Dewalt 20V batteries. Silly! I already have Dewalt 20V & Milwaukee M12 (3/8 Fuel 90 degree impact driver) platforms. Not getting into another system.
@@speedokoterefinishnetwork4937 being a DIYer, if I buy something to save me time for one project & it saves me a bunch of time, it could be a throw away. Obviously, the sander wouldn’t be. I’ve bought $20 pneumatic brad nailers from HF to do crown & base moulding trim work, if they last the one project, they’ll have done their job. Appreciate you as always, stay safe & keep the content coming. Congratulations on being monetized.
Sure do! Aerosol version but same difference. Once I run out, I should get the quart, probably would use a bit less material since I can dial down the fan/material
@@prestonrushmore9692 I get slightly finer blends with the quart, but it's also more hassle being I gota take my gun apart, get that out, pop the lid, pour ect ect. The smr400a is great just pop the can open and spray, done.
@@Rboling4199 I'll be back in stock within 4-8 weeks. I am adding even more value to the kit and actually reducing the cost at the same time. I'm guna blow everyone's socks off with this one. There will not be a more complete paint gun kit/system on the market. And it's only avalible exclusively to my subscribers!
Glad you're getting some funds in! I enjoy the videos. Thank you
Me to. I just Wana do more videos for you guys and tool reviews.
I like the idea of this sander. My tools are air operated,my thinking is if I can pull less off of my air compressor,the better. It would have been helpful to have the sound of the sander instead of your music. Great video and great tips like buying an extra battery. The blend turned out very nice,thanks.
Love mine. Very convenient .One of the big batts will easily sand down all the tins on a motorcycle.
Yea I find with bigger panle work it tents to lose some juice, but for little small panle work / mobile bumper repair techs this thing is amazing.
I’ve said it before and I’ll say it again your an absolute legend 👍👍🤩🤩👍👍great videos and very interesting content keep it up 👍
Wow thanks man!
dang the thumb nail is giving you some body builder arms :D make sure you do the legs too.
Love these videos
Thanks bro appreciate it. Check out the corded sander there way better for what you do.
3:05 for a curvy area like this, are you using a Hook and Loop Soft Sponge Cushion Interface Buffer Pad on your Orbital Sander? Mine is 0.5 inch thick. I saw these being used on this very area on another channel the other day, and ordered a pack.
Can the pad be swapped out with a 6” pad?
(25+ yrs collision repair lead painter)
Not 100% sure buddy. And thanks for coming to the channel
Turned out great!
In and out like water down the spout.
Which sand paper were you using
I absolutely love your videos! You teach a lot and get right to the point. I have watched your videos multiple times each and have notifications for any new videos you upload. I have a question for headlight restoration I plan on doing 5 or 6 cars in the family and want something that looks great but won’t die back and will last for years. Do you recommend the $59 speedo gallon kit or the $67 production 3 minute clear or possibly even a different gallon kit? Thanks!
Get the glamor clear bro. Ss1210.
Perfect will do! Thanks bro
Marco why would never use a dyna or hutchinson with a interface pad. I love the interface pad works so well smoothing primer doesnt cut into body work.
There cool don't get me wrong. But I beat the living crap out of my sanders so usually just buy a new one every year. 35$ is litterally a peanut to me honestly. Lol
@@speedokoterefinishnetwork4937 I hear that. Keep up the good work man I look forward to more content gratz on getting monetized. Since watching your cahnnel Im getting more into the JDM scene.
How much does a job like this cost in 2024? Beautiful work btw
Most auto body businesses charge a minimum of 300 per panel 2024 .
Will not find many "professionals" Doing it under that.
You're the g.o.a.t my friend@@speedokoterefinishnetwork4937
So around 3k for like a camry?@@speedokoterefinishnetwork4937
Would you use this to finish a poor paint job with tons of dust nibs etc l with 1500, 2000, 3000?
Absolutely.
How many hours of life do you get on the battery before you have to recharge I’m on decide which one to buy cordless or this one
What is your opinion of the Speedkote SS 2790 G Primer? I want to use it on some new plastic bumpers for my 2005 Honda Civic as a sealer. I also want to use it on my 1998 Dodge Ram 1500 Truck, The truck has some minor rust holes on the doors and on the sail panels below and a mediium size dent on the exterior rear bed. Also the Dodge is black and the factory clear coat is peeling on the roof surfaces. Your videos are awsome. Your guidence is appreciated.
That's our premium line of primer surfacer. BUY IT. even better than the Smr210. You can tint it, and also reduce it and make your own primer sealer.
@@speedokoterefinishnetwork4937
Will the SS2790G work in both situations listed above or will I have to buy different primer/sealers? On the new plastic bumpers for the Civic with some adhesion additive as an epoxy sealer? On the Dodge Ram as an epoxy sealer, and primer for a total vehicle repaint with your Jet Black single stage.
Brand new bumpers you want the trc 500 if there BARE PLASTIC, if the bumpers come with factory shipping primer there is 0 need to put more primer on them. For doing body work and stuff yea the smr2790 is Awsome
What type of primer do you use on all of your jobs? Is that epoxy primer?
Smr210 is the God of primers man. I use it on everything. It's tint able, thin able, or you can spray it straight and it goes on thick as honey and can block it down like body filler. Hands down best primer on the market for the money. Only 79 bucks for a gallon includes activator
@@speedokoterefinishnetwork4937 Great man, I will be purchasing some soon. Thanks man, great work you’re doing
Paid. Good for you. Keep it up!
Heck yea, just Wana do more videos for you guys
Hey man, quick question. I went to order some 2k clear coat from speedokote. They are not shipping to Canada. Is that a covid 19 thing or there not shipping to home users in canada?
I think they have a different supplier for Canada let me ask.
Nice work bro. Color blender like a clear to thin it out?
Yea it's a clear solution you thin 1-1, then add basecoat to it and is like a translucent layer to your blend. It took me a long time to do it and get good, but I'm pretty good at it now.
Cool, keep em coming!! Can't wait to lay some down again.
👍👍
Question can I use speedokote base coat binder to lay pear colorshift then clear it.
Naa basecoat binder is for people who have mixing systems for oem refinishing and simply don't want to pay the hefty charge for locally sourced binder.
@@speedokoterefinishnetwork4937 what would be a good product to mix my pearl with instead of my clear to do a 3 stage paint job?
It's usually best to buy that stuff premade. It takes hours of testing to make a solid formula. Everyone mixes slightly different. I don't give away any information on my own formula.
I’m kinda digging that color. Still rocking the smr135?
Smr135 is my year around go to for panle work. Summer time for all overs I stick with the ss1200. At only 179.99 for a 6 quart kit that's only about 29 bucks per sprayable quart still very affordable.
Nice bro. Have yet to shoot smr135 actually. Have used ss1200 in the summer with medium activator, laid down like glass. Took a while to dry, that’s my only complaint. But hey that’s a price I’m willing to pay for virtually zero dieback. I’ll have to try SS-1210 or smr135 next. Still have some 1200 and smr130 left. Also got some euro clear, so I’m gonna hold off till I get low 😂
@@prestonrushmore9692 summer time use fast with the ss1200. 2-3 coats with fast activator still get no die back and it dries about 5 min faster tack free. The Smr135 is good for bumper / multi panle jobs. Or all overs if you Wana be like me and spray a whole car with your garage door open in 40 degree weather 🥴🥴🥴🥴😂
@@speedokoterefinishnetwork4937 hahahah! I saw that in your other vid, you animal😂 thanks for the tip on the fast activator for ss1200. I’ll have to try that, anything that gets me dust free quicker I’m all for, my garage is far from a spray booth as I know you understand lol
Yup been there. You saw my old shop. So yea stick with fast activators for sure. Only time I'd go medium if it was like 90-100 degrees. But the ss1200 always use fast activator. Even with the fast activator it still take 12 min to dry tack free in hot weather which is plenty of time
Same the buffer , for buffing it’s not worth it at all!
Realy? What's wrong with the cordless buffer?
Hello. What spray gun do you use? Thanks
My brand
Harbor freight would have been geniuses if they had made their Bauer tools to accept Dewalt 20V batteries. Silly! I already have Dewalt 20V & Milwaukee M12 (3/8 Fuel 90 degree impact driver) platforms. Not getting into another system.
True. These are cheap China knock offs. They do work and are worth the money but still China stuff.
I'd say China stuff is hit or miss. Sometimes you can get better quality. Sometimes it's crap
@@speedokoterefinishnetwork4937 being a DIYer, if I buy something to save me time for one project & it saves me a bunch of time, it could be a throw away. Obviously, the sander wouldn’t be. I’ve bought $20 pneumatic brad nailers from HF to do crown & base moulding trim work, if they last the one project, they’ll have done their job. Appreciate you as always, stay safe & keep the content coming. Congratulations on being monetized.
@@jdub229r thanks man
What gun is that hvlp or lvlp and type compressor
Hvlp , craftsman 60 gallon
@@speedokoterefinishnetwork4937 have you used lvlp guns like aeropro608 or something ?
@5:48 what was you spraying with? There's nothing on the gun?
Looks like SMR400 blending clear. Melting the edge in the middle of the bumper. Don’t need much
Speedoblend, good stuff! Only need a few squeezes of the trigger and I get perfect polish free blends every time.
@@prestonrushmore9692 hope you got this in your collection. I use it on all my blend in jobs
Sure do! Aerosol version but same difference. Once I run out, I should get the quart, probably would use a bit less material since I can dial down the fan/material
@@prestonrushmore9692 I get slightly finer blends with the quart, but it's also more hassle being I gota take my gun apart, get that out, pop the lid, pour ect ect. The smr400a is great just pop the can open and spray, done.
Would you guys paint my car i would love to do some work with you
Cash2kcars@gmail.com
@@speedokoterefinishnetwork4937 sent you a email thanks!
Is that pad 6" or 5"?
5"
You got any coupon codes for speedokote?
Only farther discounts are if you spend 1000 get 10% off or if you spend 2000 I think you get 15% off. Not 100% sure if those are current numbers.
Anyone notice the huge booger hanging from his nostril
Lmfao thanks for the Input, I'll do better next review
@@speedokoterefinishnetwork4937 haha happens to the best of us! I need one of the mark paint guns, shoot me a message
@@Rboling4199 I'll be back in stock within 4-8 weeks. I am adding even more value to the kit and actually reducing the cost at the same time. I'm guna blow everyone's socks off with this one. There will not be a more complete paint gun kit/system on the market. And it's only avalible exclusively to my subscribers!