Dyson V11 - How to clean the filter
Вставка
- Опубліковано 5 жов 2024
- The video shows how to best clean the filter of your Dyson V11 with tap water. The Dyson V11 is the top model of the Dyson cordless vacuum cleaners.
1. Turn the filter holder counterclockwise. 2. Slide out the filter from the handle. 3. Knock off the most giant pieces of collected dust. 4. Rinse the entire filter in lukewarm warm tap water. 5. Let it dry overnight until dry inside. 6. Mount back by turning counterclockwise.
Good luck! It's a straightforward job.
FYI: I seldom recommend people to purchase things, and the whole point of this video is 'do-it-yourself.' In this case, I admit that I bought a spare set of 2 filters for 20 dollars because it allows me to finish my vacuum cleaning without having to wait 24 hours for the wet filter to dry.
amzn.to/3Ldidsh
The link takes you to the correct part number (Replace Part # 970013-02 ) for Dyson V11 Animal, V11 Torque Drive V15 Detect Cordless Vacuum.
#ad #dyson #cleaning #diy #amazon
Disclosure: As an Amazon Associate I earn from qualifying purchases.
Great, thank you for the cleaning demonstration. Yours is the easiest one I found on UA-cam. Much appreciated.
So this morning my dyson v11 is getting its first filter bath. Thank you for the instructions!
Thanks for the tip! I just ordered a Dyson v11. Hopefully, the negative comments I have been seeing are very rare.
I have a suggestion. I know I"m a bit late. But I use a second vacuum, and I put a brush attachment on it. I then vacuum the filter with that, getting all the large things off. Then, I run it under the water. It works great, and I don't have to touch the dirt :D I do put the vacuum on low power setting so I do not damage the filter.
Your video is way better than the video explanation for the oficial dyson site ! Thank u
Thank you for the easy step-by-step!
Exactly what I needed and thanks for doing this video.
If you are careful you can remove the lower filter from the main body to give a more in depth clean. It is held in place with 2 clips, so carefully locate them and use light pressur from a large flat screwdriver to prize the the clips apart. You need a bit of common sense and a feel of when something may break. If you don't possess both of these requirements then stick to the standard wash.
Ah man I can't find any pictures or videos of how to seperate the purple housing from the filters, any tips on where I should be looking out for? Is it the two long pieces that's hanging on one end only?
I think a powerful air blower is more effective.
If dust gets wet, it just goes into a soggy mush, harder to remove in my opinion
This guy Forgot to say the most important part, you do not put a wet filter back on let it dry for 24 hours minimum then shake the filter if you still see excess water let it dry longer. Never put a wet filter on this will only cause bad smells down the track
Here is more to help You:
ua-cam.com/video/0uolTVzlpSo/v-deo.html
Listen, at 4:10 he mentions it.
He certainly does mention it, he said let it dry for 24 hours.
I heard him say that! Just listen a little farther along
It is a common sense NOT to put the wet filter back on😂😂.
Does he really need to say that?🤦♀️😂😂
Thank you so so much! 💓 Explanations easy to follow!
Great video thankyou for sharing this 👍💜
Thanks!
Great explanation. Easy to follow. Thank you very much!
Bra förklaring!
Thank you 🙏 😊😊😊
0:31- U skipped the Part that I needed to learn how to Open up
Don't put you hepa filter back in wet. You will have to get it repaired. FYI. Get a second filter instead.
A link to additional filters on SALE in the description!
That’s the nastiest filter I’ve ever seen!
I have a big dog & 2 birds and mine isn't half as bad, lol
Oh dear ! You haven’t seen mine ! 😬
Mine was pretty gross too but that’s probably because I vacuum every other day.
How does his still work????!!!! Mine gets like five particles of dust and it shuts off and tells me the filter needs to be cleaned.
Our dyson v8 doesn't have filter..I don't know f the service guy removed it,,,n I found out only when it wasn't working properly.do u think, it was d reason why it didn't work properly???
Thanks fbu could answer my question
They have a filter. Look for it on UA-cam….
Awesome tutorial - thank you!
Es increíble la cantidad de agua que desperdicia para el lavado de un filtro de una máquina que, al no tener que reemplazarlo, ayuda al medio ambiente. :(
You can give some water in a bowl or small bucket and wash the filter their.
Just as a general precaution, one should disconnect the battery pack before doing maintenance on the device. (Coming from an electronics technician)
Thanks 👍
how do we disconnect the battery pack?
This is 100% unnecessary according to the manual.
Yes. Not suppose to do that…
Thanks
After doing all that light says filter not sealed.
I've looked at your comment and the only seal that I can see is possibly problematic and frequently replaced is the ‘dust bin top sealing ring’. Google it and you see which one I mean but I think first you best just take apart and reassembly all of it.
It won’t n open after I put it back together , what do
I do
It's the hinges, let it sit if some dirt is working as glue, and dry it out. Then remember to do firm anti-clockwise and it should slide right off. There are no obstacles or similar in the way.
I bought a second one of these filters so I don’t have to wait 24 hours to dry.
Check link in description for SALE on extra filters
Can a wait filter damage motor ?
My dyson is not working after replacing wait filter
If you accidentally got water in there, it could be a more extensive problem. I would remove the battery and let it dry for 48 hours before doing anything. Sorry
Did you suck up scrabbled eggs 😂😂😂😂😂😂
Shouldn't you rinse the plastic canister too?
I do!
Not necessary, as soon you hoover it gets dusty again ..
The user manual says the canister should be wiped with a wet cloth. Perhaps there's a reason behind that but they don't explain it further. The bin has a lot of seals and small hatches, sharp corners,etc. Perhaps water droplets can get stuck in some places where they can't evaporate in 24 hours and then the humidity may potentially damage the motor. Just guessing here, I may be wrong.
HOW do u Remove that part though?!
You turn it counterclockwise from the top! ❤
The video shows you
Can it be washed in the dishwasher?
@@kryptoniteee LMMMFFAAOOOOO
Just wash and tell us
@@kryptoniteee So unnecessary.
It probably wouldn’t be a good idea. Wash in the sink or outdoors
@@Lamafiasiberiana
My guy must’ve had a bad day.
Ecco perché io pulisco il filtro ogni tre mesi
Step 1 Wear gloves and a face mask
almost meme worthy video